GlobalH3CA-8 AC100/110/120
Solid-state Timer
Image
48 x 48 x 89 mm, 100/110/120 VAC, Time range 0.1 s to 9990 h (7 range), Output Time-limit contact: DPDT, 8-pin round socket
| Rated supply voltage |
100 VAC 50/60 Hz 110 VAC 50/60 Hz 120 VAC 50/60 Hz |
|---|---|
| Time range |
0.1s to 9990h |
| Input method |
No-voltage input |
| Output modes |
A (Power ON delay) |
| Control output |
Time-limit contact: DPDT |
| Display method |
LCD |
| External connection method |
8-pin round socket |
- Ratings/Performance
As of August 8, 2016
| Rated supply voltage | 100 VAC 50/60 Hz 110 VAC 50/60 Hz 120 VAC 50/60 Hz |
|---|---|
| Operating voltage range | 85% to 110% of rated supply voltage |
| Power consumption | 10VA / 1W |
| Time ranges（Number of ranges） | 7 |
| Time ranges | 0.1 s to 99.9 s / 1 s to 999 s / 0.1 min to 99.9 min / 1 min to 999 min / 0.1 h to 99.9 h / 1 h to 999 h / 10 h to 9990 h |
| Select method | Thumbwheel Switch |
| Input method | No-voltage input |
| Output modes | A (Power ON delay) |
| Control output （Contact output） | Type: Time-limit contact: DPDT Switching capacities (Resistive load): 3 A at 250 VAC Minimum applicable load: 10 mA at 5 VDC (failure level: P Reference value) |
| Reset system | Self-reset |
| Power reset | Reset time: 0.1 s max. |
| Display method | LCD |
| Digit | 3 digit |
| Ambient temperature | Operating: -10 to 55 ℃ |
| Ambient humidity | Operating: 35 to 85%RH |
| Accuracy of operating time | ±0.3% ±0.05 s (The values are based on the set value.) |
| Setting error | ±0.5% ±0.05 s (The values are based on the set value.) |
| Influence of voltage | ±0.3% ±0.05 s (The values are based on the set value.) |
| Influence of temperature | ±0.3% ±0.05 s (The values are based on the set value.) |
| Insulation resistance | 100 MΩ min. (at 500 VDC) |
| Dielectric strength | Between current carrying metal parts and non-current carrying metal parts: 2000 Between control output terminals and operating circuit: 2000 Between non-continuous contacts: 1000 |
| Impulse withstand voltage | 5 kV |
| Vibration resistance （Destruction） | 10 to 55 Hz, 0.75 mm single amplitude each in 3 directions for 1 hour |
| Vibration resistance （Malfunction） | 10 to 55 Hz, 0.5-mm single amplitude each in 3 directions for 10 min |
| Shock resistance （Destruction） | 1,000 m/s**2, 3 times each in 6 directions |
| Shock resistance （Malfunction） | 100 m/s**2, 3 times each in 6 directions |
| Mechanical life | 10 million operations min. (under no load at 1,800 operations/h) |
| Electrical life | 100,000 operations min. (3 A at 250 VAC resistive load at 1800 operations/h) |
| Degree of protection | Panel surface: IP40 |
| Mounting method | Flush mounting / Surface mounting |
| External connection method | 8-pin round socket |
| Accessory (sold separately) | Y92A-48D: Soft Cover Y92A-48B: Hard Cover Y92F-30: Flush mounting adapter Y92F-70: Flush mounting adapter Y92F-71: Flush mounting adapter |
| Weight | 約110g |
As of August 8, 2016
- Dimensions
As of August 8, 2016
As of August 8, 2016
- Block diagram
As of August 8, 2016
As of August 8, 2016
- Electrical life
As of August 8, 2016
As of August 8, 2016
about this Product
Top of page
© Copyright OMRON Corporation 2007 - 2012. All Rights Reserved.