Classification to thermal printer mechanism
Classification by "Operating voltage" 5V 24V
Classification by "Paper roll width" 58mm 60mm 80mm 112mm
2 Stations 38mm + 38mm 50mm +50mm
"EP Series" Printer Mechanisms "EP Series" Printer Mechanisms
MLT4281
Paper roll
58mm
80mm/sec
Printing Speed
Removable
Platen
Auto cutter
Printing method | Thermal dot line printing method | |
---|---|---|
Total dots | 384 dots/line | |
Dot density | 8 dots/mm | |
Printing width | 48mm | |
Printing speed | Max. 80mm/sec. (640 dot-lines/sec) | |
Paper width | Max. 58mm | |
Paper feeding pitch | 0.125mm | |
Sensors | PE sensor | Photo-interruptor |
Head temperature sensor | Thermistor | |
Paper sensor | Photo-interruptor | |
Platen sensor | Mechanical switch | |
Cutter position sensor | Photo-interruptor | |
Frame | Zinc (Die cast) | |
Operating voltage *1 | VH | DC 4.2 to 8.5V |
Vdd | DC 3.0 to 5.5V | |
Current consumption | Head (VH) | Max.: 2.2A approx. (VH=5V) |
Max.: 3.7A approx. (VH=8.5V) | ||
Motor (VH) | Max.: 0.8A approx. (VH=8.5V) | |
Cutter driver motor (VH) | Max.: 0.8A approx. (VH=8.5V) | |
Recommended paper | Width | 58 mm |
Thickness | 59 to 75µm | |
Paper diameter *2 | φ60mm or less | |
Paper (Manufacturer) | TF50KS-E2D (Nippon Paper) | |
Reliability *3 | Head pulse-resistance | 100 million pulses or more |
Haed wear-resistance | 50km or more | |
Auto cutter *4 | 1 million cuts | |
Environment | Operation | Temperature: 0 to 45°C Humidity: 35 to 85% RH (No condensation) |
Storage | Temperature: -20 to 60°C Humidity: 10 to 90% RH (No condensation) |
|
External dimensions | 79.0 (W) × 48.3 (D) × 18.0 (H) mm | |
External dimensions | 79.0 (W) × 48.3 (D) × 18.0 (H) mm (Eexcluding the platen assy's, motor and lever |
|
Weight | Approx. 110g |
MLT4281
-
P1
(1) |
|||
---|---|---|---|
(1) PNE sensor | None: No sensor P1: PNE sensor |
BD2-4281U