Commercial/Medical D C P o w e r S u p p l i e s International + Linears International + Linears Summary: • World-wide ac input ranges and safety standards • Industry standard packages • Commercial UL/CSA TUV/IEC approved— models to UL/CSA 60950; EN/IEC60950-1 • Burn-in with cycling; 3-year warranty • Capacitors have highest CV & ripple current ratings • Medical Approved to UL2601-1/60601-1, IEC60601-1 and CSA601.1 • Medical leakage 10 μA • MTBF 200,000+ hours per MIL-HDBK-217D (most units) • All electrolytic caps rated at 105°C • Transformer insulation meets Class F (155°C) • Exceed FCC and CISPR22, Class B conducted emissions • RoHS Compliant models available (G suffix) • marked to LVD SPECIFICATIONS Remote Sensing Ac Input Provided on all models; open sense lead protection built-in (except HA & HTAA 100, 120 and 240 Vac: +10%, -13%; 215 Vac: +12%, -11%; 47 to 63Hz. Toler- series). ance for 230 Vac operation is +15%, -10%. Derate output current 10% for 50 Stability Hz operation. ±0.05% for 24 hours after warmup. Dc Output Temperature Rating See voltage rating chart. Adjustment range ±5% minimum except HA series. 0 to 50°C full rated, derated linearly to 40% at 70°C. Line Regulation Temperature Coefficient ±0.05% for a 10% change. ±0.01%/°C maximum. Load Regulation Efficiency ± 0.05% for a 50% load change. 5 V units: 45%; 12 and 15 V units: 55%; 20 and 24 V units: 60%. Output Ripple Logic Inhibit and Current-Share 3 mV +0.05% of output voltage, peak to peak maximum. All “3-terminal regu- F & G models. lator” outputs: 3 mV +0.2% peak to peak maximum. Medical Stock and Vibration Transient Response Per Mil-Std-810D, Method 514.3, Category 1, Procedure 1. <50 microseconds for 50% load change. Per Mil-Std-810D, Method 516.3, Procedure III. Short Circuit Protection Storage Automatic current limit/foldback. -40 to +85 °C. Overvoltage Protection Built-in on all 5 V models, set at 6.2 V ±0.4 V. Other models use optional over- voltage protection. O All specifications are typical at nominal input, full load at 25 C unless otherwise stated Commercial Model (Single) Medical Model Voltage Current Case HB2-3-A+G 2 V 3 A B HC2-6-A+G 2 V 6 A C HE2-18-A+G 2 V 18 A E ML5-1-OV-A 5 V 1.0 A L HA5-1.5-OV-A+G 5 V 1.5 A B HB5-3-OV-A+G 5 V 3 A B HC5-6-OV-A+G 5 V 6 A C HN5-9-OV-A+G 5 V 9 A N HD5-12-OV-A+G 5 V 12 A D HE5-18-OV-A+G 5 V 18 A E F5-25-OV-A+*G 5 V 25 A F G5-35-OV-A+ * (1) 5 V 35 A G CP197-A+G 5 V 50 A G ML12-0.5-A 12 V 0.5 A L HA15-0.9-A+ (12 V)G 12 V 0.9 A B HB12-1-7-A+G MB12-1-7-A 12 V 1.7 A B HC12-3.4-A+G MC12-3.4-A 12 V 3.4 A C HN12-5.1-A+G 12 V 5.1 A N HD12-6.8-A+G MD12-6.8-A 12 V 6.8 A D HE12-10-2-A+G 12 V 10.2 A E ML15-0.4-A 15 V .4 A L HA15-0.9-A+G 15 V 0.9 A B HB15-1.5-A+G MB15-1.5-A 15 V 1.5 A B HC15-3-A+G MC15-3-A 15 V 3 A C HN15-4.5-A+G 15 V 4.5 A N HD15-6-A+G MD15-6-A 15 V 6 A D HE15-9-A+G * 15 V 9 A E F15-15-A+G * 15 V 15 A F HA24-0.5-A+G 24 V 0.5 A B HB24-1.2-A+G MB24-1.2-A 24 V 1.2 A B HC24-2.4-A+G MC24-2.4-A 24 V 2.4 A C HN24-3.6-A+G 24 V 3.6 A N HD24-4.8-A+G MD24-4.8-A 24 V 4.8 A D HE24-7.2-A+G * 24 V 7.2 A E F24-12-A+G * 24 V 12 A F HA24-0.5-A+ (28 V)G 28 V 0.5 A B HB28-1-A+G MB28-1-A 28 V 1 A B HC28-2-A+G MC28-2-A 28 V 2 A C HN28-3-A+G 28 V 3 A N HD28-4-A+G MD28-4-A 28 V 4 A D HE28-6-A+G * 28 V 6 A E F24-12-A+(28 V)G * 28 V 10 A F HB48-0.5-A+G 48 V 0.5 A B HC48-1-A+G 48 V 1 A C HD48-3-A+G ** 48 V 3 A D HE48-4-A+G 48 V 4 A E F48-6-A+G * 48 V 6 A F Notes: 1. All single output models have isolated outputs. 2. Model G5-50-OV-A+ not RoHS compliant Commercial Model (Dual) Medical Model Output 1 Output 2 Case HAA5-1.5-OV-A+G 5 V @ 1.5 A 5 V @ 1.5 A AA HBB5-3-OV-A+G 5 V @ 3 A 5 V @ 3 A BB HCC5-6-OV-A+G 5 V @ 6 A 5 V @ 6 A CC HAA512-A+G MAA512-A 5 V @ 2 A 9 to 15 V (adj) @ 0.5 A AA HBB512-A+G MBB512-A 5 V @ 3 A 9 to 15 V (adj) @ 1.2 A BB HCC512-A+G ** MCC512-A 5 V @ 6 A 9 to 15 V (adj) @ 2.5 A CC HAA524-A+G ** MAA524-A 5 V @ 2 A 18 to 24 V (adj) @ 0.3 A AA HBB524-A+G MBB524-A 5 V @ 3 A 18 to 24 V (adj) @ 0.8 A BB HCC524-A+G MCC524-A 5 V @ 6 A 18 to 24 V (adj) @ 2 A CC HAD12-0.4-A+G +12 V @ 0.4 A -12 V @ 0.4 A B MLL12-0.25-A +12 V @ 0.25 A -12 V @ 0.25 A L MLL15-0.2-A +15 V @ 0.2 A -15 V @ 0.2 A L HAD15-0.4-A+G +15 V @ 0.4 A -15 V @ 0.4 A B HAA15-0.8-A+G MAA15-0.8-A +15 V @ 0.8 A -15 V @ 0.8 A *** AA HBB15-1.5-A+G MBB15-1.5-A +15 V @ 1.5 A -15 V @ 1.5 A *** BB HCC15-3-A+G MCC15-3-A +15 V @ 3 A -15 V @ 3 A *** CC HDD15-5-A+G +15 V @ 5 A -15 V @ 5 A *** E HAA24-0.6-A+G +18 to 24 V @ 0.4/0.6 A -18 to 24 V @ 0.4/0.6 A AA CP323-A+G +5 V @ 2 A +12 V @ 4 A BB ** May require fan cooling *** No. 2 output usable at -5 V, rate at 1/2 of 15 V current rating. Commercial Model (Triple) Medical Model Output 1 Output 2 Output 3 Case MTLL-5W-A 5 V @ 0.5 A +12 to 15 V @ 0.1 A -12 to 15 V @ 0.1 A*** L HTAA-16W-A+G MTAA-16W-A 5 V @ 2 A +12 to 15 V @ 0.4/0.4 A -12 to 15 V @ 0.4/0.4 A*** AA HBAA40W-A+G MBAA40W-A 5 V @ 3 A +12 to 15 V @ 1/0.8 A -12 to 15 V @ 1/0.8 A*** BAA HCBB105W-A+G ** 5 V @ 3 A +12 to 15 V @ 3.4/3.0 A -12 to 15 V @ 3.4/3.0 A*** CBB HCAA60W-A+G MCAA60W-A 5 V @ 6 A +12 to 15 V @ 1/0.8 A -12 to 15 V @ 1/0.8 A*** D HCBB75W-A+G MCBB75W-A 5 V @ 6 A +12 to 15 V @ 1.7/1.5 A -12 to 15 V @ 1.7/1.5 A*** CBB CP131-A+G 5 V @ 8 A +12 to 15 V @ 1.7/1.5 A -12 to 15 V @ 1.7/1.5 A*** NBB HDBB105W-A+G * 5 V @ 12 A +12 to 15 V @ 1.7/1.5 A -12 to 15 V @ 1.7/1.5 A*** DBB HDCC150W-A+G * 5 V @ 12 A +12 to 15 V @ 3.4/3 A -12 to 15 V @ 3.4/3 A*** DCC *Requires fan cooling ** May require fan cooling ***No. 3 output usable at -5 V, rate at 1/2 of 15 V current rating. Outputs rated at 9 to 15V, 12 to 15V, or 18 to 24V are user adjustable outputs. All outputs without + or - sign are isolated outputs and may be referenced as either a positive or negative output. FIXED DISK SERIES Both models without UL, CSA or TUV Commercial Model (Dual) Output 1 Output 2 Output 3 Case CP379-A+G +5 V @ 6 A + 24 V @ 3.5/6 A PK -5 or -12 @ 1.2 A NBB CP498-A+G +5 V @ 6 A + 12 V @ 5/10 A PK -12 V @ 0.5 A NBB SL Power Electronics, Inc. 6050 King Drive, Bldg A, Ventura, CA, 93003, USA. Phone: (805) 486 4565 Fax: (805) 487 8911 Email: info@slpower.com. www.slpower.com Rev. 12/19/08. Data Sheet © 2008 SL Power Electronics, Inc. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. INTERNATIONAL + LINEAR MECHANICAL SPECIFICATIONS A CASE (WT. 1 LB.) B CASE (WT. 2 LB.) C CASE (WT. 4 LB.) D CASE (WT. 7.5 LB.) INTERNATIONAL + LINEAR MECHANICAL SPECIFICATIONS E CASE (WT. 10 LB.) F CASE (WT. F5: 14 LB.; F15, 24: 18 LB.)) G CASE (WT. G5: 19 LB.) N CASE (WT. 7 LB.) L CASE (WT. 1 LB.) INTERNATIONAL + LINEAR MECHANICAL SPECIFICATIONS AA CASE (WT. 2 LB.) BB CASE (WT. 4 LB.) CC CASE (WT. 7 LB.) BAA CASE (WT. 5 LB.) INTERNATIONAL + LINEAR MECHANICAL SPECIFICATIONS CBB CASE (WT. 8 LB.) DBB CASE (WT. 11 LB.) DCC CASE (WT. 12 LB.) NBB CASE (WT. 12 LB.) SL Power Electronics, 6050 King Drive, Bldg. A, Ventura, CA 93003, USA. Phone:(805) 486-4565 Fax:(805) 487-8911 www.slpower.com. Rev. 4/710. Data Sheet © 2010 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.