ABRACON CORPORATION ABBTM-2.4GHZ-T

26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T RoHS Compliant to MSL level 3 Pb 26.9 x 13.0 x 2.5 mm SMT Compliant |||||| | | | | | | | | | FCC ID# A8RABBTM2-4G FEATURES: APPLICATIONS: • Bluetooth Spec v2.0+EDR Compliant • Hand-held devices • Class 2, up to 10-meter range • Printers ® • Complete 2.4GHz Bluetooth System • Personal Navigation Devices ® • Power management: low power 1.8V operation for Bluetooth core • PDAs and other portable terminals • Compact size: 26.9mm (L) x 13 (W) mm x 2.5mm (H) ® • Bluetooth Profile Supported: SPP • Internal antenna • On-board flash memory (8Mbits) • Surface mount module for embedded applications • Several firmware options • Rewritable flash memory for easy upgrade route • Custom firmware production available GENERAL DESCRIPTION Abracon's ABBTM is a complete Bluetooth® solution. It is built on CSR BC04-External Core and 8Mbit Flash memory. It’s a short range, compact and cost effective module. Designed to be embedded into electronic devices needing Bluetooth® connectivity. The ABBTM module is a power class2 Bluetooth® device, and is in compliance with version 2.0+EDR of the Bluetooth® specification. It includes CSR BC04-External Core and 8Mbit Flash memory, internal antenna, supporting circuitry, together with higher-level software proto- cols and applications such as L2CAP, SDP and GAP are resident in the flash memory. Operating Frequency Band 2.4GHz ~ 2.48GHz Unlicensed ISM Band Bluetooth Specification V2.0 + EDR Output Power Class Class 2 Operating Voltage +3.3V Host Interface UART Audio Interface PCM Interface Flash Memory Size 8 MB ELECTRICAL SPECIFICATIONS: Absolute Maximum Ratings Minimum Maximum Storage temperature -40ºC +150ºC Supply voltage: VBAT -0.4V 5.6V Other terminal voltages VSS-0.4V VDD+0.4V Recommended Operating Conditions Minimum Maximum Operating temperature range -40ºC +85ºC Guaranteed RF performance range -40ºC +85ºC Supply voltage: VBAT 2.2V 4.2V 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001 LLC CE CER RTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T RoHS Pb 26.9 x 13.0 x 2.5 mm SMT Compliant |||||| | | | | | | | | | FCC ID# A8RABBTM2-4G POWER CONSUMPTION Connection UART Rate Operation Mode Average Unit Type (kbps) Page scan - 115.2 0.42 mA ACL No traffic Master 115.2 4.60 mA ACL With file transfer Master 115.2 10.3 mA ACL 1.28s sniff Master 38.4 0.37 mA ACL 1.28s sniff Slave 38.4 0.42 mA SCO HV3 30ms sniff Master 38.4 19.8 mA SCO HV3 30ms sniff Slave 38.4 19.0 mA Standby Host connection - 38.4 40 µA Note: Low power mode on the linear regulator is entered and exited automatically when the chip enters/leaves Deep Sleep mode. REFERENCE CIRCUIT BT_TX BlueTooth UART Tx BT_RX BlueTooth UART RX 3V3 Module Power LED State indication 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001 LLC CE CER RTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T RoHS Pb 26.9 x 13.0 x 2.5 mm SMT Compliant |||||| | | | | | | | | | FCC ID# A8RABBTM2-4G Firmware Configuration a) UART Baud: 115200 , N, 8, 1 b) BlueTooth Name: ABBTM c) Pin Code: 0000 Software Description 1. After Power on 3V3, the module is connectable and Pairing 2. ABBTM-2.4GHz-T can be found with the name “ABBTM” via any Bluetooth device 3. Input the Pincode “0000”, you can pair with the module named “ABBTM” 4. Then the ABBTM can be connected 5. Data can be transferred between the ABBTM and any other Bluetooth device State Indicator a) Connectable and discoverable LED: 100mS High Level per 2S b) Connected LED: always on MECHANICAL DIMENSIONS Recommended Land Pattern No. Pin Name No. Pin Name No. Pin Name 1 UART-TX 13 GND 25 PIO (2) 2 UART-RX 14 GND 26 PIO (3) 3 UART-CTS 15 NC 27 PIO (4) 4 UART-RTS 16 SPI-CSB 28 PIO (5) 5 PCM-CLK 17 SPI-MOSI 29 PIO (6) Pin # 34 6 PCM-OUT 18 SPI-MISO 30 PIO (7) Pin # 1 7 PCM-IN 19 SPI-CLK 31 PIO (8) 8 PCM-SYNC 20 USB NC D+ 32 PIO (9) 9 AI0 (0) 21 GND 33 PIO (10) 10 AIO (1) 22 GND 34 PIO (11) 11 RESET 23 PIO (0) 12 +3.3V 24 PIO (1) Dimensions: mm. Note: Specified dimensions without tolerance are listed for reference purposes only. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001 LLC CE CER RTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T RoHS Pb 26.9 x 13.0 x 2.5 mm SMT Compliant |||||| | | | | | | | | | FCC ID# A8RABBTM2-4G PIN DESCRIPTION Pin # Name Type Function 1 UART-TX CMOS Output UART Data Output 2 UART-RX CMOS Input UART Data Input 3 UART-CTS CMOS Input UART Clear To Send Active Low 4 UART-RTS CMOS Output UART Request To Send Active Low 5 PCM-CLK Bi-directional Synchronous Data Clock 6 PCM-OUT CMOS Output Synchronous Data Output 7 PCM-IN CMOS Input Synchronous Data Input 8 PCM-SYNC Bi-directional Synchronous Data Sync 9 AIO(0) Bi-directional Programmable Input/Output Line 10 AIO(1) Bi-directional Programmable Input/Output Line Reset if low.Input debounced so must be 11 RESETB CMOS Input low for>5ms to cause a reset 12 3.3V POWER +3.3V Supply 13 GND GND Ground 14 GND GND Ground 15 USB D- Bi-directional USB Data Minus NC NC Chip Select For Synchronous Serial Interface 16 SPI-CSB CMOS Input 17 SPI-MOSI CMOS Input Serial Peripheral Interface Data Input 18 SPI-MISO CMOS Output Serial Peripheral Interface Data Output 19 SPI-CLK CMOS Input Serial Peripheral Interface Clock USB Data Plus with selectable internal 1.5KΩ 20 U NC SB D+ NC Bi-directional 21 GND GND Ground 22 GND GND Ground Bi-directional with programmable 23 PIO(0) Control output for external LNA (if fitted) strength Bi-directional with 24 PIO(1) programmable Control output for external PA (if fitted) strength 25 PIO(2) Bi-directional Programmable Input/Output Line 26 PIO(3) Bi-directional Programmable Input/Output Line Bi-directional with Programmable Input/Output Line or 27 PIO(4) programmable optional strength BT_Priority/CH_Clk output for co- Bi-directional with Programmable Input/Output Line or 28 PIO(5) programmable optional strength BT_Active output for co-existence Bi-directional with Programmable Input/Output Line or programmable optional 29 PIO(6) strength WLAN_Active/Ch_Data input for co- 30 PIO(7) Bi-directional Programmable Input/Output Line 31 PIO(8) Bi-directional Programmable Input/Output Line 32 PIO(9) Bi-directional Programmable Input/Output Line 33 PIO(10) Bi-directional Programmable Input/Output Line 34 PIO(11) Bi-directional Programmable Input/Output Line 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001 LLC CE CER RTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T RoHS Pb 26.9 x 13.0 x 2.5 mm SMT Compliant |||||| | | | | | | | | | FCC ID# A8RABBTM2-4G PART IDENTIFICATION: ABBTM-2.4GHz - Packaging Options Blank Bulk T 500 units per reel T2 250 units per reel MARKING Line #1: Abracon Logo Line #2: Abracon Part # Line #3: Date Code (wk / year) Line #4: RoHS Line #4: CE Certification Symbols Line # 3: FCC ID REFLOW PROFILE T max to T (Ramp-up Rate) 3°C/second max. S L Preheat Temperature Min. (T Min.) 150°C S Temperature Typical (T Typ.) 175°C S Temperature Max. (T Max.) 200°C S Time (t ) 60 ~ 180 seconds S Ramp-up rate (T to T ) 3°C/second max. L p Time Maintained Above: --Temperature (T )/Time (T ) 217°C/60 ~ 150 seconds L L Peak Temperature (T ) 250°C max. for 10 seconds p Target Peak Temperature (T Target) 250°C +0/-5°C p Time within 5°C of actual peak (t ) 20 ~ 40 seconds p Ramp-down Rate 6°C/second max. Tune 25°C to Peak Temperature (t) 8 minutes max. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001 LLC CE CER RTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale 26.9 x 13.0 x 2.5 mm SMT Bluetooth Module ABBTM-2.4GHz-T RoHS Pb 26.9 x 13.0 x 2.5 mm SMT Compliant |||||| | | | | | | | | | FCC ID# A8RABBTM2-4G PACKAGING: (500) units per reel standard, (250) units per reel available (option # T2) a) Unless otherwise specified, the tolerance is ±0.1mm b) The carrier tape material thickness is 0.4mm c) Unless otherwise specified, the round corner is R0.3; the peeling angle is no greater than 5° d) The finished products has no rough edges and no damage; cover tape should is sealed e) Material is ROHS compliant Packaging: ABBTM-2.4GHz-T and ABBTM-2.4GHz-T2 devices will be packaged per MSL level-3 requirements; Labeled as MSL 3, Tape-Packed + Vacuum-Packed with Antistatic bag, Desiccant, Humidity Indicator Card (HIC). Ref: IPC/JEDEC J-STD-033B.1 ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 05.01.15 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001 LLC CE CER RTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale