CERAMIC SMD ULTRA MINIATURE QUARTZ CRYSTAL Moisture Sensitivity Level (MSL) – This product is Hermetically ABM10 RoHS/RoHS II Compliant Pb Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable 2.5 x 2.0 x 0.5 mm |||||||| | | | | | | | FEATURES: APPLICATIONS:  2.5 x 2.0 x 0.5mm ultra miniature package  Blue-tooth, Wireless applications  High density applications  Suitable for RoHS reflow profile  Computers, Modems, Microprocessors  PCMCIA  Tight stability available ±10ppm over -10 to +60ºC  Communication, Test equipment  Portable radios and MP3 players  Seam sealed ceramic package assures high precision and reliability STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes Frequency Range 12.000 55.000 MHz Fundamental Operation Mode Fundamental Operating Temperature -10 +60 ºC See options Storage Temperature -40 +125 ºC Frequency Tolerance @+25°C ±20 ppm See options Frequency Stability over the Operating ±30 ppm See options Temperature ( ref. to +25°C) Equivalent series resistance (R1) See table 1 below Ω Shunt capacitance (C0) 7 pF Standard (See options Load capacitance (CL) 10 pF if other than STD) Drive Level 10 100 µW Aging@25°C±3°C ±5 ppm First year Insulation Resistance 500 M Ω @ 100Vdc ± 15V Table 1 – standard ESR Frequency (MHz) ESR(Ω) max. 12.000 – 15.999 250 16.000 – 19.999 150 20.000 – 29.999 100 30.000 – 55.000 70 OPTIONS & PART IDENTIFICATION: (Left blank if standard) ABM10 - MHz - - - - - Packaging Blank: Bulk Frequency in MHz Please specify the T: 1000pcs/reel frequency in MHz. T3: 3000pcs/reel e.g. 16.000MHz Load Capacitance Freq. Tolerance (pF) Custom ESR if other 1: ± 10 ppm Please specify CL than standard in pF or S for series 7: ± 15 ppm R□ (8pF min.) 3: ± 25 ppm □: Specify a value in Ω 4: ± 30 ppm (e.g.: R40) Operating Temp. ± 10 ppm ± 15 ppm ± 20 ppm ± 30 ppm ± 50 ppm ± 100 ppm 0°C ~ +50°C I10 I15 I20 I30 I50 I100 -10°C ~ +60°C A10 A15 A20 STD* A50 A100 -20°C ~ +70°C E10 E15 E20 E30 E50 E100 -30°C ~ +70°C C10 C15 C20 C30 C50 C100 -30°C ~ +85°C N10 N15 N20 N30 N50 N100 -40°C ~ +85°C X X D20 D30 D50 D100 -40°C ~ +105°C X X X X J50 J100 X X X X K50 K100 -40°C ~ +125°C * Please leave blank, as this is the standard/default spec. Contact Abracon for tighter frequency stability 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.21.15 ABRACON IS ABRACON IS Ph. 949.546.8000 | Fax. 949.546.8001 ISO9001:2008 LLC CE CER RTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale CERTIFIED CERAMIC SMD ULTRA MINIATURE QUARTZ CRYSTAL ABM10 RoHS/RoHS II Compliant Pb 2.5 x 2.0 x 0.5 mm |||||||||| | | | | | OUTLINE DRAWING: Note: From the top view (marking side), pin #1 is always located at the bottom left corner of the package. This is regardless of the location of the Chamfer, since due to material availability, the Chamfer could be located on pin#1, 2 or 4. Be advised that the Chamfer location has no impact on the electrical performance of the device. Dimensions: inches (mm) TAPE & REEL: REFLOW PROFILE: T: 1000pcs/reel T3: 3000pcs/reel Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Need a test socket for the ABM10 Series? To view Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, compatible PRECISION TEST & BURN-IN SOCKETS Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating for these parts, click here. P/N: AXS-2520-04-10 - environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 04.21.15 ABRACON IS ABRACON IS Ph. 949.546.8000 | Fax. 949.546.8001 ISO9001:2008 LLC CE CER RTIFIED TIFIED Visit www.abracon.com for Terms and Conditions of Sale CERTIFIED