ABRACON CORPORATION AISC-1008-R10K-T
Specifications
Manufacturer
Abracon Corporation
Manufacturers Part #
AISC-1008-R10K-T
Industry Aliases
AISC-1008-R10KT, AISC-1008-R10K-T
Sub-Category
Surface Mount Inductors
Packaging
Tape and Reel
Factory Pack Quantity
2000
Datasheet
AISC-1008(F).pdf
6151 KiB
Extracted Text
Wire Wound Inductor - Ceramic Or Ferrite Base AISC-1008(F) RoHS/RoHS II Compliant Pb 2.92 x 2.79 x 2.29m m |||||||||| | | | | | FEATURES: APPLICATIONS: Ceramic or Ferrite Construction assures the utmost in the thermal Widely applied in the VCO, SAW circuit for GSM, CDMA stablity and high SRF communications Exceptionally high Q compared to non-wirewound inductor, Used in hard disk, notebook computer and other especially at high frequencies electronic equipment Inductance values available from 4.7 nH to 10,000nH STANDARD SPECIFICATIONS: Part Number Min. L/Q Test Max. DC Max. Rated Min. Self-resonant AISC-1008- Inductance Tolerance Quality Freq. Resistance Current Frequency Inductance Code Factor Units nH - - MHz Ω mA MHz Symbol L - Q Freq. DCR Ir S.R.F AISC-1008-R0047 4.7 J, K, M 50 50/1500 0.11 1000 >6000 AISC-1008-R010 10 G, J, K, M 50 50/500 0.08 1000 4100 AISC-1008-R012 12 G, J, K, M 50 50/500 0.09 1000 3300 AISC-1008-R015 15 G, J, K, M 50 50/500 0.13 1000 2500 AISC-1008-R018 18 G, J, K, M 50 50/350 0.11 1000 2500 AISC-1008-R022 22 G, J, K, M 55 50/350 0.12 1000 2400 AISC-1008-R027 27 G, J, K, M 55 50/350 0.13 1000 1600 AISC-1008-R033 33 G, J, K, M 60 50/350 0.14 1000 1600 AISC-1008-R039 39 G, J, K, M 50 50/350 0.15 1000 1500 AISC-1008-R047 47 G, J, K, M 65 50/350 0.16 1000 1500 AISC-1008-R056 56 G, J, K, M 50 50/350 0.18 1000 1300 AISC-1008-R068 68 G, J, K, M 65 50/350 0.21 1000 1200 AISC-1008-R082 82 G, J, K, M 60 50/350 0.22 1000 800 AISC-1008-R10 100 G, J, K, M 60 25/350 0.56 650 1000 AISC-1008-R12 120 G, J, K, M 60 25/350 0.63 650 950 AISC-1008-R15 150 G, J, K, M 50 25/100 0.62 580 800 AISC-1008-R18 180 G, J, K, M 50 25/100 0.7 620 750 AISC-1008-R22 220 G, J, K, M 50 25/100 0.8 500 630 AISC-1008-R27 270 G, J, K, M 50 25/100 0.91 500 600 AISC-1008-R33 330 G, J, K, M 50 25/100 1.05 450 530 AISC-1008-R39 390 G, J, K, M 50 25/100 1.12 470 480 AISC-1008-R47 470 G, J, K, M 50 25/100 1.19 470 450 AISC-1008-R56 560 G, J, K, M 50 25/100 1.33 400 390 AISC-1008-R62 620 G, J, K, M 45 25/100 1.4 300 375 AISC-1008-R68 680 G, J, K, M 45 25/100 1.47 400 360 AISC-1008-R75 750 G, J, K, M 45 25/100 1.54 360 360 AISC-1008-R82 820 G, J, K, M 45 25/100 1.61 400 330 AISC-1008-R91 910 G, J, K, M 35 25/50 1.68 380 295 AISC-1008-1R0 1,000 G, J, K, M 35 25/50 1.8 370 270 AISC-1008-1R2 1,200 G, J, K, M 35 7.9/50 2 310 200 AISC-1008-1R5 1,500 G, J, K, M 28 7.9/50 2.3 330 150 AISC-1008-1R8 1,800 G, J, K, M 28 7.9/50 2.6 300 120 AISC-1008-2R2 2,200 G, J, K, M 28 7.9/50 2.8 280 100 AISC-1008-2R7 2,700 G, J, K, M 22 7.9/25 3.2 290 90 AISC-1008-3R3 3,300 G, J, K, M 22 7.9/25 3.4 290 70 AISC-1008-3R9 3,900 G, J, K, M 17 7.9/25 3.6 260 60 AISC-1008-4R7 4,700 G, J, K, M 20 7.9/25 4 260 50 AISC-1008-5R6 5,600 G, J, K, M 20 7.9/25 5.7 240 40 AISC-1008-6R8 6,800 G, J, K, M 20 7.9/25 7.7 200 40 AISC-1008-8R2 8,200 G, J, K, M 20 7.9/25 10.7 150 30 Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.17.13 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001 :2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Wire Wound Inductor - Ceramic Or Ferrite Base AISC-1008(F) RoHS/RoHS II Compliant Pb 2.92 x 2.79 x 2.29m m |||||||||| | | | | | Part Number Min. L/Q Test Max. DC Max. Rated Min. Self-resonant AISC-1008F- Inductance Tolerance Quality Freq. Resistance Current Frequency Inductance Code Factor Units nH - - MHz Ω mA MHz Symbol L - Q Freq. DCR Ir S.R.F AISC-1008F-R33 330 J, K, M 50 25/100 0.17 700 600 AISC-1008F-1R0 1,000 J, K, M 20 7.9/50 0.80 600 250 AISC-1008F-1R2 1,200 J, K, M 37 7.9/50 0.80 650 250 AISC-1008F-1R5 1,500 J, K, M 35 7.9/50 0.76 630 190 AISC-1008F-1R8 1,800 J, K, M 33 7.9/50 0.84 600 170 AISC-1008F-2R2 2,200 J, K, M 30 7.9/50 1.15 520 150 AISC-1008F-2R7 2,700 J, K, M 25 7.9/50 1.30 490 120 AISC-1008F-3R3 3,300 J, K, M 23 7.9/50 1.70 450 100 AISC-1008F-3R9 3,900 J, K, M 26 7.9/25 2.00 420 100 AISC-1008F-4R7 4,700 J, K, M 31 7.9/7.9 1.68 400 60 AISC-1008F-5R6 5,600 J, K, M 23 7.9/7.9 2.65 380 80 AISC-1008F-6R8 6,800 J, K, M 20 7.9/7.9 3.00 360 60 AISC-1008F-8R2 8,200 J, K, M 20 7.9/7.9 3.30 330 40 AISC-1008F-100 10,000 J, K, M 15 7.9/7.9 2.95 300 40 Test Conditions and Equipemt o a. Ambient Temperature: 20± 15 C b. Relative Humidity: 65%±20% c. Air Pressure: 86KPa to 106KPa Inductance (L): Agilent4287A+Agilent16197A or equivalent, -13dBm or 10mA Direct Current Resistance (DCR): HIOKI 3540 or equivalent Q Factor (Q): Agilent4287A+Agilent16197A or equivalent, -13dBm or 10mA Self-Resonant Frequency (SRF): Agilent4991B+Agilent16197A and HP 8753E or equivalent, -20dBm or 50mV o Rated Current (Ir): Ir is direct electric current as chip surface temperature rose just 20 C against chip initial surface temperature (Ta) Operating Temperature: -40ºC to +125ºC for AISC-1008, -40ºC to +85ºC for AISC-1008F Storage Temperature: -10ºC to +40ºC, 70% RH max. Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.17.13 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001 :2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Wire Wound Inductor - Ceramic Or Ferrite Base AISC-1008(F) RoHS/RoHS II Compliant Pb 2.92 x 2.79 x 2.29m m |||||||||| | | | | | ELECTRICAL CHARACTERISTICS CURVES : AISC-1008-R010 AISC-1008-R010 AISC-1008-R082 AISC-1008-R082 AISC-1008-R27 AISC-1008-R27 AISC-1008F-1R0 AISC-1008F-1R0 AISC-1008F-2R2 AISC-1008F-2R2 AISC-1008F-4R7 AISC-1008F-4R7 PART IDENTIFICATION: AISC-1008 - - Material Code Inductance Code Tolerance Code Packaging Blank: Ceramic G: ±2% T: Tape & Reel (2k/reel) Please refer to the table F: Ferrite J: ±5% K: ±10% M: ±20% OUTLINE DIMENSIONS: A MAX. B MAX. C MAX. D REF. E F H REF. I REF. J REF. 2.92 2.79 2.29 0.51 2.1±0.2 0.5±0.2 2.54 1.02 1.27 Dimension: mm Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.17.13 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001 :2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Wire Wound Inductor - Ceramic Or Ferrite Base AISC-1008(F) RoHS/RoHS II Compliant Pb 2.92 x 2.79 x 2.29m m ||||||||| | | | | | | Materials No. Components Material A Coating Ultraviolet epoxy resin B Core Ceramic C Wire Polyurethane system enameled copper wire AISC-1008: Mo-Mn with Ni and Au plating D Electrodes AISC-1008F: Ag-Pd with Ni-Sn plating REFLOW PROFILE: o Δ 1~2 C/sec. Ramp o Pre-heating: 150~190 C /90±30 sec. Δ o Δ Time above 240 C: 20~40sec o Δ Peak temperature: 260 C Max./10sec; Δ Solder paste: Sn/3.0Ag/0.5Cu Max.2 times for Re-flowing Δ 2kpcs /Reel TAPE & REEL: Φ1.5(+0.1/ -0) 4.0±0.1 T 0 5 A P B K Max T 2.73±0.2 4.0±0.1 2.90±0.2 2.34±0.2 0.23±0.1 A P K 2.0±0.1 10±1.5 4.0±0.1 5.0 ±0.1 2.45 ±0.2 3.0 ±0.1 ATTENTION :Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automo- tive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requir- ing high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.17.13 ABRACON IS ABRACON IS ISO 9001 / QS 9000 ISO 9001 :2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com B 3.5±0. 1 1.75±0.1 8.0±0.3 13.5 ±0.2 58±2 178 ±2
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the AISC-1008-R10K-T?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Inductor RF Chip Shielded Multi-Layer 680nH 10% 25MHz 15Q-Factor Ferrite 35mA 1.7Ohm DCR 0603 T/R AI...
Inductor RF Chip Wirewound 27nH 5% 250MHz 26Q-Factor Ceramic 400mA 300mOhm DCR 0402 T/R AISC-0402-27...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods