GPS Active Antenna Module - Adhesive Mount RoHS/RoHS II compliant APAMP-108 Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 54.5 X 44.5 X 14.8mm MSL level: Not Applicable FEATURES: TYPICAL APPLICATIONS: • Automotive Navigation • High Reliability/ Sensitivity • Automotive Monitoring • Compact Size • Personal Tracking • Easy to install (adhesive tape base) • ROHS Compliant STANDARD SPECIFICATIONS: Antenna Parameters Min. Typ. Max. Units Note 1574.40 1575.42 1576.44 MHz Center Frequency 10.0 MHz Bandwidth 1.5:1 VSWR (Right Hand Circular Polarization) Polarization Model RHCP Impedance 50 Ω (Based on 70× 70mm ground plane) 5 Gain dBic -40 +80 Operating Temperature ˚C -45 +85 Storage Temperature ˚C Low Noise Amplifier (LNA) Parameters Min. Typ. Max. Units Note 1574.40 1575.42 1576.44 MHz Frequency DC Voltage 3.0 5.0 V (Without cable +25°C ± 10°C) Gain 25 27 29 dB (fo+100MHz) 25 dB Out-of-band Rejection (Absolute (fo-100MHz) Value) 40 dB Output VSWR 2.0 (+25°C ± 10°C) Noise Figure 1.5 (At 5.0V) DC current 13.5 15.5 mA Overall (Complete Module including RF connector) Parameters Min. Typ. Max. Units Note 1574.40 1575.42 1576.44 MHz Frequency 2.0 Output VSWR Impedance 50 Ω (Based on 70× 70mm ground plane) 25 27 29 Gain dBic Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.24.14 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com CERTIFIED GPS Active Antenna Module - Adhesive Mount RoHS/RoHS II compliant APAMP-108 Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 54.5 X 44.5 X 14.8mm ANTENNA’S IMPEDANCE AND RETURN-LOSS CHARACTERISTICS S11: Input VSWR Test condition:27x27mm ground LNA REFLECTION PROFILE S21: LNA Gain Test condition: DC 3.0V OUTLINE DRAWING: Parameters Description Top View L (Cable Length) 300±10cm Antenna Dielectric Ceramic RF Cable Attenuation 1.3 dB/m PCB FR4 RF Connector SMA-J3 Shielding Tinplate Thickness 15.0mm Mounting Type Adhesive Tape Side View Unit:mm Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.24.14 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com CERTIFIED GPS Active Antenna Module - Adhesive Mount RoHS/RoHS II compliant APAMP-108 Lead in copper alloy exemption (6c); and Lead in glass exemption (7c-I) 54.5 X 44.5 X 14.8mm PRODUCT IMAGE: PACKAGING: Each 475 x 215 x 215 mm size carton includes 100 pieces of antenna. CAUTION: (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) Do not expose the component to open flame. (3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica- tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 10.24.14 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com CERTIFIED