4.7 x 4.1mm BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-MTD AWSCR-MTD Pb in ceramic AWSCR-MTD RoHS 4.7 x 4.1mm (exempt per RoHS 2002/95/EC Annex (7)) Compliant |||||||||||||| | FEATURES: APPLICATIONS: • Low resonant impedance • Built-in load capacitors • IR reflow capable • Consumer electronics STANDARD SPECIFICATIONS: Item Requirement t Table 2.1 Frequency Range 6.00MHz to 50.00MHz Resonant Impedance Standard Built-in Capacitance Frequency Range Resonant Impedance See Table 2.1 C1=C2 (pF) (MHz) (Ro)((ΩΩ)) Frequency Tolerance ± 0.5% 6.00 MHz - 13.00 MHz 30 22pF ±20% 13.01 MHz - 16.00 MHz 40 22pF ±20% ±0.4% (6.00 MHz~13.00 MHz) Frequency Stability * 16.01 MHz - 25.99 MHz 40 10pF ±20% ±0.3% (13.01 MHz~50.00 MHz) max. (-25ºC to +85ºC) 26.00 MHz - 50.00 MHz 40 5pF ±20% Withstanding Voltage (V) 50 (DC , 1 min) Rating Voltage * Please contact ABRACON for tighter stability (1) D.C.Voltage 6 V.D.C. max and/or wider temperature range (2) A.C. Voltage 15 Vp-p. max Built-in Capacitance See Table 2.1 Insulation Resistance 100MΩ min. (10V, 1min) Operation Temperature -25ºC to +85ºC* o o Storage Temperature -55 C to +85 C Aging Rate (Fosc) ±0.3% max. (10 years) TEST CIRCUIT: Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure X: Ceramic Resonator 1.Input 2.Ground 3.Output OPTIONS AND PART IDENTIFICATION: AWSCR - XX.XXMTD - C - Frequency Load Capacitance Packaging Frequency in MHz T for Tape and Reel Contact ABRACON for Load Capacitance options (1,000pcs/reel) Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.12.10 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 4.7 x 4.1mm BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-MTD AWSCR-MTD Pb in ceramic AWSCR-MTD RoHS 4.7 x 4.1mm (exempt per RoHS 2002/95/EC Annex (7)) Compliant |||||||||||||| | OUTLINE DRAWING: RECOMMENDED LAND PATTERN Dimension : mm TAPE & REEL: (1,000pcs/reel) Blank Pocket Loaded Pocket Leader Blank Pocket 10 Pitches 200mm Max 10 Pitches Top Tape 10 max φA φB W T Pieces per reel Carrier tape size Carrier Tape 180±3 60min 12.4min 19.4max 1000typ. 12 Dimension : mm Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.12.10 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com P el ng Strengt 20-70g e i h 4.7 x 4.1mm BUILT-IN CAPACITANCE CERAMIC RESONATOR AWSCR-MTD AWSCR-MTD Pb in ceramic AWSCR-MTD RoHS 4.7 x 4.1mm (exempt per RoHS 2002/95/EC Annex (7)) Compliant |||||||||||||| | REFLOW PROFILE: 10s max Peak:260℃max 250℃ 230℃ 150℃ Pre-heating 100℃ within within 30s min 80-120s. 20-40s CAUTION • Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. • This component is not hermetically sealed. Do not clean or wash the component. • Reflow soldering: Do not use strong acidity flux,such as flux with chlorine content of greater than 0.2wt% during reflow Soldering. • Do not expose the component to open flame. • This specification applies to the functionality of the component as a single unit. Customers are advised to insure that the component is thoroughly evaluated in the particular application. • Shelf life: The warranted shelf life of this product is six months after the delivery date under the conditions of sealed, unopened, original packaging. • Storage conditions: If the product is to be stored for a period greater than six months after the delivery date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. • This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-reliability, life-dependant application. Contact Abracon Corporation prior to using this product when in doubt. ABRACON IS CERTIFIED ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.12.10 ABRACON IS ABRACON IS 30332 Esperanza, Rancho Santa Margarita, California 92688 ISO9001:2008 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com