4.7 X 4.1 X 1.2 mm INDUSTRIAL GRADE CERAMIC RESONATOR AWSZT-MWD RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) FEATURES: APPLICATION: • Remote controls, Microprocessor clocks, Mobile • Low resonant impedance phones, DVD & CD-Roms, Electric appliances • IR reflow capable • Consumer electronics • Low cost ELECTRICAL SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes Frequency Range 6.00 13.00 MHz Resonant Impedance (Ro) 30 Ω Load Capacitance (C1=C2, for test 24 30 36 pF circuit) Frequency Tolerance @25 ºC -0.5 +0.5 % Frequency Stability (-25ºC to +85ºC) -0.4 +0.4 % 50 V DC , 1 min Withstanding Voltage (1) D.C.Voltage +6 V Rating Voltage (2) A.C. Voltage 15 Vp-p. Insulation Resistance 100 MΩ 10V, 1min +85 Operation Temperature -25 ºC -55 Storage Temperature +85 ºC Aging Rate (Fosc) (10 years) -0.3 +0.3 % OPTIONS AND PART IDENTIFICATION: AWSZT - MWD - Packaging Frequency T: 1000pcs/Reel Frequency in MHz TEST CONDITIONS AND TEST CIRCUIT Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±3°C, Humidity: 65±5% R.H.) is regulated to test. X: Ceramic Resonator C1=C2: 30pF ±20% Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.09.13 ABRACON IS ABRACON IS ISO9001:2008 CE CER RTIFIED TIFIED 4.7 X 4.1 X 1.2 mm INDUSTRIAL GRADE CERAMIC RESONATOR AWSZT-MWD RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) OUTLINE DIMENSION: Recommended Land Pattern 8.00* 3.9 ± 0. 2 ① ② 0.8 ± 0.2 0.8 ± 0.2 3.9 ± 0.2 (1.2 + 1.5 ± A 0.2 ) ± 0.2** 0.8 ± 0. 2 0.8 ± 0. 2 4.7 ± 0.2 ①INPUT ②OUTPUT *:EIAJ MONTHLY CODE ** ‘A’ stands for the thickness of Dimension: mm the ceramic element, which varies with the frequency SUGGESTED REFLOW PROFILE 10s ma x Peak:260℃ ma x 250℃ 230℃ 150℃ P re -he a tin g 100℃ withi n withi n 80-120s . 30s mi n 20-40 s Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.09.13 ABRACON IS ABRACON IS ISO9001:2008 CE CER RTIFIED TIFIED 4.1 ± 0.2 5.1 ± 0. 2 4.7 X 4.1 X 1.2 mm INDUSTRIAL GRADE CERAMIC RESONATOR AWSZT-MWD RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) TAPE & REEL: Packaging: T: 1000pcs/Reel T op T a p e 1 0 ma x C a rrie r T a p e Pieces per ФA ФB W T Carrier tape size reel Dimensions: mm 180±3 60 min. 12.4 min 19.4 max 1000 typ. 12 Note: upo n opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. CAUTION (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high- reliabilit , y life dependant applications. ContactAbracon Corporation prior to using this product when in doubt. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica- tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.09.13 ABRACON IS ABRACON IS ISO9001:2008 CE CER RTIFIED TIFIED P e e lin g S tre n g th 20-70 g