LEADED CERAMIC RESONATOR RoHS/RoHS II Compliant HWZT-MD Pb in ceramic, exemption (7c-I) Siz e Varies ||||||| | | | | | | | | FEATURES: APPLICATIONS: • Low resonant impedance • Clock oscillation for microcontrollers • Small size, Light weight. • Telephones • Low cost timing solution • Household electric appliances STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes 2.00 6.00 Frequency Range MHz 12.51 60.00 80 2.00 MHz ~ 2.99 MHz Resonant Impedance (Ro) 30 Ω 3.00 MHz ~ 6.00 MHz 30 12.51 MHz ~ 60.00 MHz 24 30 36 2.00 MHz ~ 6.00 MHz 24 30 36 12.51 MHz ~ 20.00 MHz Standard Load Capacitance for pF test circuit (C1=C2) 12 15 18 20.01 MHz ~ 25.99 MHz 4 5 6 26.00 MHz ~ 60.00 MHz Frequency Tolerance -0.5 +0.5 % Frequency Stability -0.3 +0.3 % -25ºC to +85ºC Withstanding Voltage 50 Vdc DC , 1 min D.C. Voltage 6 Vdc Rating Voltage A.C. Voltage 15 Vp-p. Insulation Resistance 100 MΩ 10Vdc, 1min Operation Temperature -25 +85 ºC Storage Temperature -55 +85 ºC Aging Rate (Fosc) -0.3 0.3 % From initial value TEST CONDITION AND TEST CIRCUIT: OPTIONS & PART IDENTIFICATION: HWZT - MD - X: Ceramic Resonator Frequency Packaging Blank: Bulk Frequency in MHz A: AMMO package* *AMMO package lead length 13.5mm Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition (Temp: 25±2°C, Humidity: 65±5% R.H.) is regulated to measure Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.07.13 ABRACON IS ABRACON IS ISO9001:2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com ** LEADED CERAMIC RESONATOR RoHS/RoHS II Compliant HWZT-MD Pb in ceramic, exemption (7c-I) Siz e Varies ||||||||| | | | | | | OUTLINE DRAWING: Freq. Range: 2.00 ~ 6.00MHz (Low Profile) Bulk: AMMO: Freq. Range: 12.51 ~ 60.00MHz Bulk: AMMO: 5.0max 10.0max 0.5±0.1 0.25±0.1 5.0±0.30 H :*:EIAJ MONTHLY CODE 12.51 ~ 23.99MHz, 10.0mm max 24.00 ~ 31.99MHz, 7.5mm max Dimension: mm 32.00 ~ 60.00MHz, 6.5mm max Packaging: Bulk: 500pcs/plastic bag AMMO: 2000pcs/box Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod- uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. CAUTION (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high- reliabilit , y life dependant applications. ContactAbracon Corporation prior to using this product when in doubt. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica- tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Visit www.abracon.com for Terms & Conditions of Sale Revised: 05.07.13 ABRACON IS ABRACON IS ISO9001:2008 30332 Esperanza, Rancho Santa Margarita, California 92688 CE CER RTIFIED TIFIED tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 5.0±1.0 H