SINGLE OUTPUT MICROSIZE HV MODULES 24 XS SERIES Extra-small High Voltage Biasing Supply The XS Series of extra-small high-voltage power supplies is the smallest regulated DC-DC high-voltage power supply for applications that require a bias voltage ranging from 0 to 100V. At only 0.08in³ (1.3cc), these modules are ideal for use in size-critical applications. • Output from 0 to 100V • 100 milliwatts of output power • Tight line/load regulation Typical applications for the XS Series include the following: • Output current limit protection Bias Supplies Thin-film • 5 Volts DC Input Avalanche Photo Diodes (APD) Ultrasonic • Extra-small and lightweight Silicon Photomultipliers (SiPM) • PCB flat mounting Multi-pixel Photon Counter (MPPC) • Temperature coefficient <50ppm/°C • Low ripple (<50mV peak to peak) Please contact UltraVolt's customer service department for an • Low noise due to metal shielding analysis of your requirements. PARAMETER SPECIFICATION UNITS Input voltage Vin (pins 1 & 2) 5VDC ±0.5 (recommended) maximum: 12Vdc (reverse: -0.2V) VDC For 0V output voltage: <1.6 Input current For 100V, no load: <3 mA At full output voltage, full load: <50 HV output Vout (pin 4) 0 to 100 programmable VDC Output Power 0 to 100 mW Polarity Fixed positive or negative - HV setting (pin 3) Via external voltage source 0/2.5V - Accuracy: ±2% at full scale Max. output current Iout 1 nominal mA Load voltage regulation ±0.01% of full output voltage for no load to full load - Line voltage regulation ±0.01% of full output voltage over specified input voltage range - Residual ripple <50mV peak-to-peak – ripple can be reduced to less than 10mV by adding an external 100nF small CMS capacitor - Temperature coefficient <50 PPM/°C Output HV monitoring Not available on this product - Output reference voltage Not available on this product - HV power ON/OFF Not available on this product - Operating temperature -10 to +65, Full load, Max Eout, Case Temp °C Storage temperature -10 to +70 °C • Output current internally limited - Safeguards • Soft start feature: low overshoot Shielding Ground return is to metal enclosure - Specifications subject to change without notice. Higher Service, Higher Performance, Higher Reliability ® Making High Voltage Easier! ©2011, UltraVolt Inc. All rights reserved. ULTRAVOLT® Rev. E 2/14 SINGLE OUTPUT MICROSIZE HV MODULES 25 XS SERIES High Voltage Biasing Supply Extra-small High Voltage Biasing Supply CONSTRUCTION Steel, tin plated, thickness 0.02” (0.5) Insulation: fully potted in an epoxy resin SIZE Volume: 0.081in³ (1.331cc) Weight: 0.176oz (5g) TOLERANCE Overall ±0.030” (0.76) Pin to Pin ±0.015” (0.38) Pin to Tab ±0.020” (0.51) Tabs to Tab ±0.020” (0.51) Tab features ±0.020” (0.51) PINS Gold Plated 0.025” (0.63) sq. Length > 0.079” (2) Spacing 0.1” (2.54) DRAWING VIEWS Third angle projections CONNECTIONS ORDERING INFORMATION Type 0 to 100 VDC Output 0.1XS PIN FUNCTION 1 Positive Power Input Input 5VDC Nominal 5 2 Ground Return Power Watts Output 0.1 3 Remote Adjust Input Case Steel, Tin Plated (Standard) 4 HV Output Positive Output -P Polarity Note: Mounting tabs must be connected Negative Output -N to ground. Example: 0.1XS5-P0.1 Voltage Type Model IEC-60950-1 Power Input Polarity Non-RoHS compliant units are available. Please contact the factory for more information. Popular accessories ordered with this product include the PCB-CONN-XS. *The XS Series is not available in all territories. Please contact an UltraVolt Applications Engineer for details concerning sales in your area. 1800 Ocean Avenue, Ronkonkoma, NY 11779 ® Making High Voltage Easier! Phone: 1-631-471-4444 Fax: 1-631-471-4696 www.ultravolt.com ULTRAVOLT®