HITEK POWER® XR150 X-RAY POWER SUPPLY MODULE Complete high voltage power source for industrial x-ray systems, elemental analysis equipment, x-ray diffraction spectrometers, and materials process monitoring applications Specifically developed for high-performance x-ray applications, the compact and reliable XR150 series is surface mountable and built with superior high voltage stress control and packaging techniques. The filament is automatically controlled by integral beam loop control and the power stage utilizes a current-fed resonant push-pull converter to provide high efficiency and reliability. Features Typical Applications › 150 W high voltage output › Inspection and analytical x-ray systems with floating › 17 W floating filament filament tubes › High accuracy and stability · X-ray fluorescence (XRF) · Emission accuracy: 0.1% · X-ray diraction (XRD) · Regulation: 0.1% · X-ray reflectivity (XRR) · Stability: 100 ppm · X-ray imaging (XRI) › Exceptionally compact › Industrial process x-ray systems › Remote operation · Elemental analysis equipment › Analog or RS-232 control · Process quality, safety, interface compliance › Safety interlock · Materials monitoring · Food safety inspection › Extensive tube and system protection functions › Digital x-ray imaging and inspection › CE marked for EU LV directive · Industrial 2006/95/EC · Veterinary › EU RoHS compliant · Pharma, cellular, biotech to 2002/95/EC · Security ASK US ABOUT DERIVATIVES AND SPECIAL PRODUCTS BUILT TO YOUR REQUIREMENTS. SPECIFICATIONS Electrical Input 24 VDC ±1 VDC Voltage 11 A, max Current Electrical Output 0 to -60 kV; full spec applies above -3 kV Voltage 0 to -2.5 mA Current 150 W, max Power < 100 V, peak to peak Ripple 0 to 3.7 A (4.5 V, max) Filament Controlled by internal beam control loop Controls (Analog Version) 0 to 5 VDC demands 0 to -60 kV ±0.5% ±100 V Voltage Demand 0 to 5 VDC demands 0 to -2.5 mA ±2% ±5 μA Current Demand Internally settable between 1 and 3.7 A Filament Limit Controls (RS-232 Version) 12 bit; 0 to FFF demands 0 to -60 kV ±0.5% ±100 V Voltage Demand 12 bit; 0 to FFF demands 0 to -2.5 mA ±2% ±5 μA Current Demand 12 bit; 0 to FFF demands 0 to 3.7 A Filament Standby Monitors (Analog) 0 to 5 V ±0.5% ±20 mV for 0 to -60 kV Output Voltage 0 to 5 V ±2% ±20 mV for 0 to -2.5 mA Beam Current 0 to 5 V ±5% ±20 mV for 0 to 3.7 A Filament Current 0 to 5 V ±5% ±20 mV for 0 to 5 V Filament Voltage Monitors (RS-232) 12 bit; 0 to FFF represents 0 to -60 kV Output Voltage 12 bit; 0 to FFF represents 0 to -2.5 mA Output Current 12 bit; 0 to FFF represents 0 to 3.7 A Filament Current 12 bit; 0 to FFF represents 0 to 5 V Filament Voltage Load Regulation, Output Voltage < 60 V no load to full load Static < 3 kV, recovery to within 1% of previous setting within 200 msec Dynamic < ±2 μA for a 10 to 100% of change of rated load Beam Current Line Regulation < 60 V for a 1 V change in the 24 V supply Output Voltage < ±2 μA for a 1 V change in the 24 V supply Beam Current Stability and Drift 100 ppm/°C over operating temperature range Temperature Coefficient ±0.1% of rating over an eight-hour period after 30 min warmup Drift Environmental 0 to +40°C (+32 to +104°F) Operating Temperature -20 to +85°C (-4 to +185°F) Storage Temperature SPECIFICATION 80% maximum relative humidity up to 31°C (88°F), reducing linearly to 50% at 40°C (104°F), non- Humidity condensing (ref BS EN61010-1) In accordance with BS EN60068-2-6:1995 transport, when contained in the original packaging Vibration 10 to 500 Hz Frequency Range 20 m/sec² crossover at 58 Hz Acceleration 0.15 mm (0.006") max Displacement 0 to 2000 m (0 to 6562') Altitude Installation category 1, pollution degree 2, indoor use only Installation Environment Fan assisted Cooling Connectors Deutsch IMC24-1602 Input DC Power HiTek Power®-designed detachable poke home connector HV Output HiTek Power®-designed detachable poke home connector Filament Output 15-way, D-type socket (analog) Control Interface 9-way, D-type socket (RS-232) Protection, Safety, and Compliance Input voltage reverse polarity Protection Over-temperature Over-current (continuous short circuit and intermittent arc) on both HV output and filament Over-voltage on both HV output and filament This high voltage module meets the requirements of the Low Voltage Directive (LVD), 2006/95/EC Safety by complying with BS EN61010-1:2001 when it is installed as a component part of other equipment and is CE marked accordingly. This high voltage module is intended for installation as part of a system. EMC Basic EMC filtering is provided. The XR150 series meets the requirements of EU Directive 2002/95/EC on the restriction RoHS of use of certain hazardous substances in electrical and electronic equipment (RoHS). Mechanical Specification 80 mm x 179.5 mm x 320 mm; 3.15" x 7.07" x 12.6" (excluding fan) Dimensions (W x H x D) 8 kg (18 lb) Weight Aluminum, clear non-chrome passivate finish Casing See outline drawing (analog version). ORDERING INFORMATION Model Output Voltage Output Current XR150-603* -60 kV 2.5 mA *Please add the required suffix for control option to the part number: A Analog control C RS-232 control Example: XR150-603C for RS-232 controlled unit FILAMENT CURRENT MONITOR 1 9 0 V (SIGNAL) INTERFACE CONNECTIONS kV DEMAND 2 10 OVER-TEMPERATURE Analog, 15-way, Female, D-Type 0 V (SIGNAL) 3 FILAMENT CURRENT MONITOR 1 Connector 11 NO CONNECTION 9 0 V (SIGNAL) FILAMENT VOLTAGE MONITOR 4 kV DEMAND 2 12 RESERVED 10 OVER-TEMPERATURE BEAM CURRENT DEMAND 5 0 V (SIGNAL) 3 13 11 OVER-VOLTAGE NO CONNECTION 0 V (SIGNAL) 6 FILAMENT VOLTAGE MONITOR 4 14 OVER-CURRENT 12 RESERVED kV MONITOR 7 BEAM CURRENT DEMAND 5 15 13 COMMON RETURN FOR 10 13 14 OVER-VOLTAGE BEAM CURRENT MONITOR 8 0 V (SIGNAL) 6 14 OVER-CURRENT kV MONITOR 7 15 COMMON RETURN FOR 10 13 14 BEAM CURRENT MONITOR 8 Digital remote control (RS232) 9-way female D-type connector: Digital, Remote-Control (RS-232) NO CONNECTION 9-Way, Female, D-Type Connector 1 Digital remote control (RS232) 9-way female D-type connector: 6 NO CONNECTION TXD 2 7 NO CONNECTION NO CONNECTION RXD 1 3 6 NO CONNECTION 8 NO CONNECTION TXD NO CONNECTION 2 4 7 NO CONNECTION 9 NO CONNECTION RXD 0 V 3 5 8 NO CONNECTION NO CONNECTION 4 9 NO CONNECTION These component power supplies meet the requirements of EC directive 2006/95/EC (LVD). 0 V 5 Drawing dimensions are in mm (inches). Design developments may result in specification changes. For international contact information, visit advanced-energy.com. ENG-HV-XR150-230-01 4.16 Specifications are subject to change without notice. ©2016 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® , and Hitek Power® are U.S. trademarks of Advanced Energy Industries, Inc.