Click on Series name for product info on aimtec.com Series AM1/4L-NZ 1/4 Watt | DC-DC Converter FEATURES: o o • RoHS Compliant • Operating temperature -40 C to + 85 C • SMD Package • Input/Output Isolation 1000 and 3000VDC • Low ripple and noise • Pin compatible with multiple manufacturers • High efficiency up to 68% • UL94-VO Package Models Single output Input Voltage Output Voltage Output Current max Isolation Efficiency Model (V) (V) (mA) (VDC) (%) AM1/4L-1205S-NZ 10.8-13.2 5 50 1000 65 AM1/4L-0505SH30-NZ 4.5-5.5 5 50 3000 64 AM1/4L-1205SH30-NZ * 10.8-13.2 5 50 3000 66 AM1/4L-1212SH30-NZ 10.8-13.2 12 20 3000 67 Models Dual output Input Voltage Output Voltage Output Current max Isolation Efficiency Model (V) (V) (mA) (VDC) (%) AM1/4L-0505DH30-NZ ** 4.5-5.5 ±5 ±25 3000 64 NOTE: Add suffix “TR” to a part number when ordering in tape and reel package. * For new designs, please see new generation model AM1/4LS-1205SH30-NZ; model AM1/4L-1205SH30-NZ will be discontinued by December 31st, 2017 (EOL date). ** For new designs, please see new generation model AM1LS-0505DH30-NZ; model AM1/4L-0505DH30-NZ will be discontinued by December 31st, 2017 (EOL date). Input Specifications Parameters Nominal Typical Maximum Units 5 4.5-5.5 Voltage range VDC 12 10.8-13.2 Filter Capacitor Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1000 & 3000 VDC Resistance > 1000 MOhm Capacitance 60 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy See the tolerance graph ±5 % Voltage balance Dual Output ±2 % Line voltage regulation For 1% change of Vin ±1.2 % Load voltage regulation Load 10 – 100% 10 % o Temperature coefficient ±0.03 %/ C Ripple & Noise At 20MHz Bandwidth 75 mV p-p General Specifications Parameters Conditions Typical Maximum Units 100% load single 100 KHz Switching frequency 100% load dual 150 KHz Short circuit protection Momentary (1sec) o Operating temperature Without derating -40 to +85 C www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.M 1 of 3 North America only Series AM1/4L-NZ 1/4 Watt | DC-DC Converter o Storage temperature -55 to +125 C Cooling Free air convection Humidity 95 % Case material Plastic UL94-VO Weight 1.5 g Single 1000VDC 0.50 x 0.44 x 0.26 inch 12.70 x 11.20 x 6.70 mm Dimensions (L x W x H) Single and Dual 3000 VDC 0.60 x 0.44 x 0.26 inch 15.24 x 11.20 x 6.70 mm o MTBF >3 500 000hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) o Max Case Temperature 95 C NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Pin Out Specifications Pin Out Specifications Single 1000VDC Single and Dual 3000VDC Pin Single Dual Pin Single 1 - V Input - V Input 1 - V Input 2 + V Input + V Input 2 + V Input 3 N.C. N.C. 3 N.C. 5 -V Output Common 4 - V Output 6 N.C. -V Output 5 + V Output 7 N.C. N.C. 6 N.C. 8 +V Output +V Output 7 N.C. 10 N.C. N.C. 8 N.C. 11 N.C. N.C. 12 N.C. N.C. Typical characteristics Tolerance Envelope Graph +10 % Typical Load Line + 5% +2.5% Nominal -2.5% Voltage -7.5% 100% 10% 50% (%) Output Current www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.M 2 of 3 North America only Output Voltage Series AM1/4L-NZ 1/4 Watt | DC-DC Converter Front View Dimensions Single 1000VDC 6.70 Side View (0.26) 4.13 A 6.00 6.25 (0.16) (0.24) (0.25) 0.30 (0.01) 0.25 (0.01) 7.00 (0.28) 1.85 (0.07) Top View A 12.70 (0.50) 7.62 (0.30) 0.50 (0.02) 5.00º angle 7.50 11. 20 (0.30) (0.44) 1.50 1 (0.06) 0.50 2.54 (0.02) (0.10) All dimensions are in mm (inch) All Pins are on a 2.54mm (0.10inch) pitch with tolerance of ±0.25mm (0.01inch) Dimensions single and dual 3000VDC Front View 6.70 Side View (0.26) 4.13 6.00 6.25 (0.16) A (0.24) (0.25) 0.30 0.25 (0.01) (0.01) 7.00 (0.28) 1.85 (0.07) Top View A 15.24 (0.60) 0.50 (0.02) 7.50 11.20 (0.30) (0.44) 5.00º angle 1 1.50 0.50 (0.06) 2.54 (0.02) (0.10) All dimensions are in mm (inch) All Pins are on a 2.54mm (0.10inch) pitch with tolerance of ±0.25mm (0.01inch) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.M 3 of 3 North America only