Click on Series name for product info on aimtec.com Series AM10T-IZ 10 Watt | DC-DC Converter FEATURES: o o • Short Circuit & OVP Protection • Operating temperature -40 C to + 75 C • 24 Pin DIP Package • Regulated output • Wide 2:1 input range • Low ripple and noise • Power modules for PCB mounting • Input/output Isolation voltage 1500VDC • No minimum load Models Single output Output Input Voltage Output Current Capacitive Ripple & Noise Efficiency Model Voltage (V) max (mA) Load, max(uf) max, (% mV p-p) (%) (V) AM10T-1203SIZ 9-18 3.3 2000 4000 80 79 AM10T-1205SIZ 9-18 5 2000 3200 80 75 AM10T-1212SIZ 9-18 12 830 600 120 81 AM10T-1215SIZ 9-18 15 660 330 150 81 AM10T-2403SIZ 18-36 3.3 2000 4200 80 71 AM10T-2405SIZ 18-36 5 2000 3200 80 78 AM10T-2412SIZ 18-36 12 830 600 120 82 AM10T-2415SIZ 18-36 15 660 330 150 83 AM10T-4803SIZ 36-75 3.3 2000 3000 80 73 AM10T-4805SIZ 36-75 5 2000 2700 80 82 AM10T-4812SIZ 36-75 12 830 600 120 82 AM10T-4815SIZ 36-75 15 660 390 150 83 Models Dual output Output Input Output Current Capacitive Ripple & Noise Efficiency Model Voltage Voltage (V) max (mA) Load, max(uf) max, (%) (%) (V) AM10T-1205DIZ 9-18 ±5 ±1000 ±330 80 75 AM10T-1212DIZ 9-18 ±12 ±410 ±220 120 80 AM10T-1215DIZ 9-18 ±15 ±330 ±200 150 80 AM10T-2405DIZ 18-36 ±5 ±1000 ±330 80 79 AM10T-2412DIZ 18-36 ±12 ±410 ±220 120 82 AM10T-2415DIZ 18-36 ±15 ±330 ±200 150 84 AM10T-4805DIZ 36-75 ±5 ±1000 ±330 80 77 AM10T-4812DIZ 36-75 ±12 ±410 ±220 120 82 AM10T-4815DIZ 36-75 ±15 ±330 ±200 150 83 Input Specifications Parameters Nominal Typical Maximum Units 12 9-18 Voltage range 24 18-36 VDC 48 36-75 Filter Capacitor 12 Vin 25  Absolute Maximum Rating 24 Vin 50 VDC 48 Vin 100 Permissible absolute maximum duration 100 ms Transient Voltage Deviation 5 VDC www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.B 1 of 3 North America only Series AM10T-IZ 10 Watt | DC-DC Converter Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1500 VDC Resistance > 1000 MOhm Capacitance 470 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±2 % Short Circuit protection Continuous Short Circuit restart Auto recovery Over voltage protection Zener diode clamp >110% VDC Over load protection Auto recovery Over 110% full load Line voltage regulation HL-LL ±0.5 % Load voltage regulation (Single) 0 – 100% full load ±0.5 % Load voltage regulation (Dual) 0 – 100% full load ±2 % o Temperature coefficient ±0.05 %/ C 3.3 & 5V models 80 mV p-p Ripple & Noise mV 12 & 15V models 1% Vout p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 300 KHz o o Operating temperature Derating above +50 C -40 to +75 C o Storage temperature -55 to +115 C o Case Temperature +95 C Cooling Free air convection Humidity 95 % Case material Nickel coated cooper Weight 18 g Dimensions (L x W x H) Tolerance ±0.02 inch, ±0.5mm 1.25 x 0.80 x 0.40 inches 31.80 x 20.30 x 10.20 mm o MTBF > 700 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Standards Agency approvals UL (pending) EN 55022, class A Safety EN 55024 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.B 2 of 3 North America only Series AM10T-IZ 10 Watt | DC-DC Converter Pin Out Specifications Dimensions 22.80 31.80 (0.90) 0.50 (1.25) Pin Single Dual (0.02) 2 -V Input -V Input 3 -V Input -V Input 2 3 9 11 9 N.C. Common Bottom View 10 Omitted Omitted 11 N.C. -V Output 23 22 16 14 14 +V Output + V Output 15 Omitted Omitted 2.50 5.00 (0.10) (0.20) 16 -V Output Common 22 +V Input +V Input Printed Face 23 +V Input +V Input Derating Free Air Convection 50 ºC 100 80 60 Safe Operating Area 40 20 0 0 50 85 100 -40 -25 25 75 º C Ambient Temperature NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.B 3 of 3 North America only Output Power % 10.20 20.30 (0.40) (0.80) 3.80 (0.15) 15.20 (0.60)