AIMTEC AM1LS-2415D-NZ

Click on Series name for product info on aimtec.com Series AM1LS-NZ 1 Watt | DC-DC Converter FEATURES: • SMD Package • Input / Output Isolation 1500 & 3000 VDC o o • Single Output Models • Operating Temperature -40 C to +105 C • Low Ripple and Noise • RoHS Compliant • Industry Standard Pinout • Continuous Short Circuit Protection ‡ Models Single output Input Output Output Isolation Input Current Max Efficiency Voltage Voltage Current (VDC) Max | No Load Capacitive (%) Model (V) (V) Max / Min (mA) Load (µF) (mA) AM1LS-0303S-NZ‡ 2.97-3.63 3.3 303 / 30 1500 415 25 220 69 AM1LS-0305S-NZ‡ 2.97-3.63 5 200 / 20 1500 404 25 220 74 AM1LS-0309S-NZ‡ 2.97-3.63 9 111 / 12 1500 404 25 220 80 AM1LS-0312S-NZ‡ 2.97-3.63 12 84 / 9 1500 404 25 220 80 AM1LS-0315S-NZ‡ 2.97-3.63 15 67 / 7 1500 404 25 220 80 AM1LS-0324S-NZ‡ 2.97-3.63 24 42 / 4 1500 404 25 220 80 AM1LS-0503S-NZ 4.5-5.5 3.3 303 / 30 1500 263 20 220 76 AM1LS-0505S-NZ 4.5-5.5 5 200 / 20 1500 250 20 220 80 AM1LS-0505SJZ 4.5-5.5 5 200 / 20 1500 286 10 2400 82 AM1LS-0506S-NZ 4.5-5.5 6 167 / 17 1500 250 20 220 80 AM1LS-0509S-NZ 4.5-5.5 9 111 / 12 1500 250 20 470 80 AM1LS-0512S-NZ 4.5-5.5 12 84 / 9 1500 250 20 220 80 AM1LS-0515S-NZ 4.5-5.5 15 67 / 7 1500 250 20 220 80 AM1LS-0524S-NZ ‡ 4.5-5.5 24 42 / 4 1500 250 20 220 80 AM1LS-1203S-NZ 10.8-13.2 3.3 303 / 30 1500 111 15 220 75 AM1LS-1205S-NZ 10.8-13.2 5 200 / 20 1500 104 15 220 80 AM1LS-1209S-NZ 10.8-13.2 9 111 / 12 1500 104 15 220 80 AM1LS-1212S-NZ 10.8-13.2 12 84 / 9 1500 103 15 220 81 AM1LS-1215S-NZ 10.8-13.2 15 67 / 7 1500 103 15 220 81 AM1LS-1224S-NZ 10.8-13.2 24 42 / 4 1500 103 15 220 81 AM1LS-1505S-NZ 13.5-16.5 5 200 / 20 1500 82 10 220 80 AM1LS-1509S-NZ 13.5-16.5 9 111 / 12 1500 82 10 220 80 AM1LS-1515S-NZ 13.5-16.5 15 67 / 7 1500 82 10 220 81 AM1LS-2403S-NZ‡ 21.6-26.4 3.3 303 / 30 1500 52 7 220 71 AM1LS-2405S-NZ‡ 21.6-26.4 5 200 / 20 1500 52 7 220 80 AM1LS-2409S-NZ‡ 21.6-26.4 9 111 / 12 1500 52 7 220 80 AM1LS-2412S-NZ‡ 21.6-26.4 12 84 / 9 1500 52 7 220 80 AM1LS-2415S-NZ‡ 21.6-26.4 15 67 / 7 1500 51 7 220 81 AM1LS-2424S-NZ‡ 21.6-26.4 24 42 / 4 1500 51 7 220 81 AM1LS-0303SH30-NZ 2.97-3.63 3.3 303 / 30 3000 415 25 220 73 AM1LS-0305SH30-NZ 2.97-3.63 5 200 / 20 3000 388 25 220 78 AM1LS-0503SH30-NZ 4.5-5.5 3.3 303 / 30 3000 263 20 220 76 AM1LS-0505SH30-NZ 4.5-5.5 5 200 / 20 3000 250 20 220 80 AM1LS-0509SH30-NZ 4.5-5.5 9 111 / 12 3000 250 20 220 80 AM1LS-0512SH30-NZ 4.5-5.5 12 84 / 9 3000 250 20 220 80 AM1LS-0515SH30-NZ 4.5-5.5 15 67 / 7 3000 250 20 220 80 AM1LS-0524SH30-NZ ‡ 4.5-5.5 24 42 / 4 3000 250 20 220 80 AM1LS-1203SH30-NZ 10.8-13.2 3.3 303 / 30 3000 111 15 220 75 AM1LS-1205SH30-NZ 10.8-13.2 5 200 / 20 3000 104 15 220 80 AM1LS-1209SH30-NZ 10.8-13.2 9 111 / 12 3000 104 15 220 80 AM1LS-1212SH30-NZ 10.8-13.2 12 84 / 9 3000 103 15 220 81 AM1LS-1215SH30-NZ 10.8-13.2 15 67 / 7 3000 103 15 220 81 AM1LS-1224SH30-NZ 10.8-13.2 24 42 / 4 3000 103 15 220 81 AM1LS-1515SH30-NZ 13.5-16.5 15 67 / 7 3000 82 10 220 80 AM1LS-2405SH30-NZ‡ 21.6-26.4 5 200 / 20 3000 52 7 220 80 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.N 1 of 6 North America only Series AM1LS-NZ 1 Watt | DC-DC Converter AM1LS-2409SH30-NZ‡ 21.6-26.4 9 111 / 12 3000 52 7 220 80 AM1LS-2415SH30-NZ‡ 21.6-26.4 15 84 / 9 3000 51 7 220 81 AM1LS-2424SH30-NZ‡ 21.6-26.4 24 67 / 7 3000 51 7 220 81 Models Dual output Input Output Output Isolation Input Current Max Efficiency Voltage Voltage Current Max (VDC) Max | No Load Capacitive (%) Model (V) (V) / Min (mA) (mA) Load(µF) AM1LS-0305D-NZ 2.97-3.63 ±5 ±100 / ±10 1500 415 25 100 78 AM1LS-0312D-NZ 2.97-3.63 ±12 ±42 / ±5 1500 388 25 100 80 AM1LS-0315D-NZ 2.97-3.63 ±15 ±33 / ±3 1500 263 20 100 80 AM1LS-0505D-NZ 4.5-5.5 ±5 ±100 / ±10 1500 250 20 100 80 AM1LS-0509D-NZ 4.5-5.5 ±9 ±56 / ±6 1500 250 20 100 80 AM1LS-0512D-NZ 4.5-5.5 ±12 ±42 / ±5 1500 250 20 100 81 AM1LS-0515D-NZ 4.5-5.5 ±15 ±33 / ±3 1500 250 20 100 81 AM1LS-0524D-NZ ‡ 4.5-5.5 ±24 ±21 / ±2 1500 250 20 100 81 AM1LS-1205D-NZ 10.8-13.2 ±5 ±100 / ±10 1500 111 15 100 75 AM1LS-1209D-NZ 10.8-13.2 ±9 ±56 / ±6 1500 104 15 100 80 AM1LS-1212D-NZ 10.8-13.2 ±12 ±42 / ±5 1500 104 15 100 80 AM1LS-1215D-NZ 10.8-13.2 ±15 ±33 / ±3 1500 103 15 100 81 AM1LS-1224D-NZ 10.8-13.2 ±24 ±21 / ±2 1500 103 15 100 81 AM1LS-1515D-NZ 13.5-16.5 ±15 ±33 / ±3 1500 103 15 100 81 AM1LS-2405D-NZ‡ 21.6-26.4 ±5 ±100 / ±10 1500 83 12 100 82 AM1LS-2409D-NZ‡ 21.6-26.4 ±9 ±56 / ±6 1500 52 7 100 82 AM1LS-2412D-NZ‡ 21.6-26.4 ±12 ±42 / ±5 1500 52 7 100 82 AM1LS-2415D-NZ‡ 21.6-26.4 ±15 ±33 / ±3 1500 51 7 100 82 AM1LS-2424D-NZ‡ 21.6-26.4 ±24 ±21 / ±2 1500 51 7 100 82 AM1LS-0305DH30-NZ 2.97-3.63 ±5 ±100 / ±10 3000 389 25 100 76 AM1LS-0312DH30-NZ 2.97-3.63 ±12 ±42 / ±5 3000 389 25 100 77 AM1LS-0505DH30-NZ 4.5-5.5 ±5 ±100 / ±10 3000 250 20 100 80 AM1LS-0509DH30-NZ 4.5-5.5 ±9 ±56 / ±6 3000 250 20 100 80 AM1LS-0512DH30-NZ 4.5-5.5 ±12 ±42 / ±5 3000 250 20 100 81 AM1LS-0515DH30-NZ 4.5-5.5 ±15 ±33 / ±3 3000 250 20 100 81 AM1LS-0524DH30-NZ ‡ 4.5-5.5 ±24 ±21 / ±2 3000 250 20 100 81 AM1LS-1205DH30-NZ 10.8-13.2 ±5 ±100 / ±10 3000 111 15 100 80 AM1LS-1209DH30-NZ 10.8-13.2 ±9 ±56 / ±6 3000 104 15 100 80 AM1LS-1212DH30-NZ 10.8-13.2 ±12 ±42 / ±5 3000 104 15 100 81 AM1LS-1215DH30-NZ 10.8-13.2 ±15 ±33 / ±3 3000 103 15 100 81 AM1LS-1224DH30-NZ 10.8-13.2 ±24 ±21 / ±2 3000 103 15 100 81 AM1LS-1515DH30-NZ 13.5-16.5 ±15 ±33 / ±3 3000 83 12 100 81 AM1LS-2405DH30-NZ‡ 21.6-26.4 ±5 ±100 / ±10 3000 82 10 100 82 AM1LS-2409DH30-NZ‡ 21.6-26.4 ±9 ±56 / ±6 3000 52 7 100 82 AM1LS-2412DH30-NZ‡ 21.6-26.4 ±12 ±42 / ±5 3000 52 7 100 82 AM1LS-2415DH30-NZ‡ 21.6-26.4 ±15 ±33 / ±3 3000 51 7 100 82 AM1LS-2424DH30-NZ‡ 21.6-26.4 ±24 ±21 / ±2 3000 51 7 100 82 ‡ With Momentary short circuit protection of 1 second NOTE 1: Add suffix “TR” to a part number when ordering in tape and reel package NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 3 2.97-3.63 5 4.5-5.5 Voltage Range VDC 12 10.8-13.2 15 13.5-16.5 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.N 2 of 6 North America only Series AM1LS-NZ 1 Watt | DC-DC Converter 24 21.6-26.4 3 Vin 5 5 Vin 9 Absolute Max Input Voltage 12 Vin 18 VDC (1 sec max) 15 Vin 21 24 Vin 30 Filter Capacitor Isolation Specifications Parameters Conditions Typical Maximum Units 1500 models Tested I/O Voltage 60 sec VDC 3000 Models Resistance 500VDC >1000 MOhm Capacitance 20 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage Accuracy 100% load (see tolerance chart) ±2.5 % Short Circuit Protection Continuous, unless marked with ‡ Short Circuit Restart Auto-Recovery For ±1% of Vin ±1.2 % of Vin Line Voltage Regulation 3.3V models only ±1.5 3.3V 18 5 V 12 6 V 10 Load Voltage Regulation 9 V 8 % (10% - 100% Load) 12 V 7 15 V 6 24 V 5 o Temperature Coefficient 100% load ±0.03 %/ C Ripple & Noise 60 mV p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100 300 KHz o Operating temperature With derating above +100 -40 to +105 C o Storage temperature -55 to +125 C Cooling Free air convection Storage Humidity Non Condensing 95 % RH Case material Epoxy resin (UL94-V0) Single 1.5 Weight g Dual 1.8 Single Output 0.50 x 0.44 x 0.28inches 12.70 x 11.20 x 7.25mm Dimensions (L x W x H) Dual Output 0.60 x 0.44 x 0.28 inches 15.24 x 11.20 x 7.25 mm o MTBF >3500Khrs (MIL-HDBK -217F, Ground Benign, t=+25 C)hours o Maximum soldering temperature 1.5mm from case for 10 sec 300 C o Maximum case temperature 130 C Safety Specifications Parameters Agency approvals UL 60950-1 cULus (without 15V input and without 3.3V input of dual output models) EMI - Conducted and radiated emission EN55022, class B (with the recommended EMC circuit) Standards Electrostatic Discharge Immunity IEC 61000-4-2, Contact +/-8kV, Criteria B www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.N 3 of 6 North America only Series AM1LS-NZ 1 Watt | DC-DC Converter Pin Out Specifications and Dimensions Front View Pin Single 8.3 Side View (0.32) 1 - V Input 2 + V Input 5.00 3 No Pin (0.19) 4 -V Output 2.0 0º~10º angle 5 +V Output (0.08) 0.25 6 No Pin (0.01) 7 No Pin 1.45 0.88 8 N.C. (0.06) (0.04) Top View 12.70 (0.50) 7.62 (0.30) 8.30 11.20 (0.32) (0.44) 1 0.60 2.54 (0.02) (0.10) Dual Output Models Front View Pin Dual Output 8.15 Models Side View (0.32) 1 -V Input 5.90 2 +V Input (0.23) 7.60 3 No Pin (0.30) 1.70 4 Common (0.07) 0.25 0º~10º angle (0.01) 5 -V Output 6 No Pin 1.50 (0.06) 7 +V Output Top View 15.24 8 No Pin (0.60) 9 No Pin 7.62 10 N.C. (0.30) 11.20 8.30 (0.44)(0.33) 1 0.60 2.54 (0.03) (0.10) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.N 4 of 6 North America only Typical load line Series AM1LS-NZ 1 Watt | DC-DC Converter EMI Recommended Circuit (Class B) Input Reflected Ripple Current Test Circuit LDM L1 Test Vin+ (6.8 µh) Vin+ (4.7 µh) Point Vo+ Vo+ + Aimtec + Aimtec RL DC-DC RL DC-DC (Full C1 (Full Converter Load) Converter (220 µf) Load) Vin- Vo- Vin- - Vo- - * Tested at full load, and nominal input Load Accuracy Tolerance Graph Derating Free Air Convection 10 % ºC 100 5 % 100 +2.5 % Rated Output Voltage 80 -2.5 % 60 -7.5 % Safe Operating Area 40 70 % 20 50 100 10 105C % % % 0 Output Current % (Nominal Input) -40 -20 0 40 80 100 120 140 º C Ambient Temperature Recommended Circuits Single Vin+ Capacitor selection Table Vo+ Vin C1 Single C2 Dual C2/C3 VDC VDC C2 3.3 4.7 µF 3.3 V 10 µF ±3.3 4.7 µF C1 Vin- 5 4.7 µF 5V 10µF ±5V 4.7 µF Vo- 9 V 4.7 µF ±9V 2.2 µF 12 2.2µF 12 V 2.2µF ±12 V 1 µF 15 2.2µF 15 V 1µF ±15 V 0.47 µF Dual 24 1µF 24V 0.47 µF ±24 V 0.47 µF Vin+ Vo+ 1) Ensure output load of Min 10%, or specifications may not be C2 met Com 2) Under normal operation, there is no protection for overload C1 condition C3 3) Converter may exhibit start up delay if capacitive load Vin- Vo- exceeds recommended 4) Ceramic or electrolytic type capacitors are recommended, tantalum type may damage converter 5) Parallel connections, or hot swapping is not recommended www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.N 5 of 6 North America only Output Voltage Accuracy% C1 (4.7 µf / 50V) Output Power % Series AM1LS-NZ 1 Watt | DC-DC Converter Typical Efficiency vs. Loading AM1LS-0305S-NZ Efficiency vs. Loading 100 80 60 40 20 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Loading % AM1LS-0505S-NZ Efficiency vs. Loading 100 80 60 40 20 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Loading % AM1LS-1209S-NZ Efficiency vs. Loading 100 80 60 40 20 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Loading % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.N 6 of 6 North America only Eff % Eff % Eff %