AIMTEC AM1LT-0509S-NZ

Click on Series name for product info on aimtec.com Series AM1LT-NZ 1 Watt | DC-DC Converter FEATURES: • Low Profile SMD • Operating Temperature: -40°C to +105°C • Continuous Short circuit protection • 3000 VDC Isolation regulated model • Pin-out compatible with DCP01 Series • 1500 VDC Isolation unregulated models Models Single output Maximum Output Output Input Capacitive Isolation Efficiency Model Voltage Current Voltage(V) Load (VDC) (%) (V) max(mA) (µF) AM1LT-0505S-NZ 4.5-5.5 5 200 220 1500 76 AM1LT-0505SH30-NZ 4.75 -5.25 5 200 220 3000 70 AM1LT-1205SH30-NZ 11.4-12.6 5 200 220 3000 72 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 5 4.5-5.5 & 4.75-5.25 Voltage range VDC 12 11.4-12.6 5Vin, 5Vout, 1500V Isolation 250 Full load Input current 5Vin, 5Vout, 3000V Isolation 285 mA 12Vin, 5Vout, 3000V Isolation 115 5Vin, 5Vout 25 No load Input current mA 12Vin, 5Vout 15 5 -0.7 – 9 Absolute Max Input VDC 12 -0.7 - 18 Filter Capacitor Input reflected ripple current 5Vin, 5Vout, 1500V Isolation 15 mA p-p Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 Sec, 1mA 1500 & 3000 VDC Resistance 500Vdc 1000 MOhm 5Vin, 5Vout, I/O, 100KHz/0.1V 20 Capacitor pF Others, I/O, 100KHz/0.1V 25 Output Specifications Parameters Conditions Typical Maximum Units 1500V Isolation models See tolerance envelope graph Voltage accuracy 3000V Isolation models ±3 % Short Circuit protection Continuous Short circuit restart Auto-Recovery For 1500V Isolation models & Vin change of 1% ±1.2 Line voltage regulation % of Vin For 3000V Isolation models & Vin change of 5% ±0.25 10% to 100% load for 1500V Isolation models ±15 Load voltage regulation % 10% to 100% load for 3000V Isolation models ±1 o Temperature coefficient Nominal input,100% full load 0.03 %/ C Ripple & Noise 20MHz Bandwidth 60 100 mVp-p Minimum Load Current 10 % of Max NOTE: It is not recommended to have the outputs connected in parallel. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.L 1 of 4 North America only Series AM1LT-NZ 1 Watt | DC-DC Converter General Specifications Parameters Conditions Typical Maximum Units 5Vin, 5Vout, 100% load 100 Switching frequency KHz Others, 100% load 100 300 For 1500V isolation no derating, see derating curve o Operating temperature -40 to + 85 C For 3000V Isolation derating above 71°C o Storage temperature -55 to +125 C o Maximum case temperature 100 C Cooling Free Air Convection Humidity 95 % RH Case material Epoxy Resin(UL94-V0) Weight 1.4 g Dimensions (L x W x H) 0.77 x 0.42 x 0.20 inches, 19.50 x 10.53 x 5.10 mm o >1,500,000 hours (MIL-HDBK -217F, Ground Benign, t=+25 C) for 1500V Isolation models MTBF o >3,500,000 hours (MIL-HDBK -217F, Ground Benign, t=+25 C) for 3000V Isolation models o Maximum Soldering Temperature* 1.5mm from case for 10 seconds 260 C * Manual soldering Pin Out Specifications Single Pin 1 +Vin 2 -Vin 5 -Vout 6 +Vout 7 NC 8 NC 14 NC NC: not connected Dimensions Typical Characteristics Front View Tolerance Envelope Graph Side View 7.62 19.50 (0.30) (0.77) Typical Load Line +10% +5% 5.10 4.50 +2.5% (0.20) (0.18) -2.5% 2.54 1.27 -7.5% (0.10) 10.53 0.60 (0.05) (0.42) (0.02) 2.00 1.00 Top View (0.08) (0.04) 14 8 10% 50% 100% Output Current(%) 6.60 10.53 (0.28) (0.42) 1 2 5 6 7 2.54 (0.10) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.L 2 of 4 North America only Output Voltage Series AM1LT-NZ 1 Watt | DC-DC Converter Derating for 1500VDC Isolated models Derating for 3000VDC Isolated models Free Air Convection Free Air Convection º AM1LT-0505S-NZ 71 C 100 100 All other models 80 80 Safe Operating Area 60 60 Safe Operating Area 40 40 20 20 0 0 85 105 85 - 40 - 20 0 20 40 60 80 100 80 100 - 40 - 20 0 20 40 60 Ambient Temperatur e º C Ambient Temperatur e º C Typical application circuit for 1500VDC Isolated models Single Output +Vout + Vin Cin Cout DC DC - Vout - Vin Typical application circuit for 3000VDC Isolated models L Single Output L +Vout + Vin + Cin Cout + DC DC - Vin - Vin It is not recommended to connect any external capacitor in the application field when output loading is less than 0.5 watt. Vout Cout Vin Cin (VDC) (uF) (VDC) (uF) 5 4.7 5 10 12 2.2 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.L 3 of 4 North America only Output Power (%) Output Power (%) Series AM1LT-NZ 1 Watt | DC-DC Converter EMI Recommended Circuit (Class B) for 1500VDC Isolated models LDM 6.8µH +V output +V input DC/DC Cin Cout Converter Load -V input -V output NOTE: Cin and Cout values are the same as referenced in the Application Circuit. NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.L 4 of 4 North America only