AIMTEC AM1M-1212S-NZ

Click on Series name for product info on aimtec.com Series AM1M-NZ 1 Watt | DC-DC Converter FEATURES: • Low Profile DIP14 case • Operating Temperature: -40°C to +105°C • 1.5 and 3K VDC I/O Isolation • High Power Density • Continuous Short circuit protection • Low Isolation Capacitance Models Single output Max Input Full load Maximum Input Output Current Output Max Isolation Capacitive Efficiency Model Voltage Voltage Full/No Load Current (VDC) Load (%) (V) (V) (mA) (mA) (µF) AM1M-0505S-NZ 4.5-5.5 250/25 5 200 1500 220 74 AM1M-1205S-NZ 10.8-13.2 115/15 5 200 1500 220 73 AM1M-0303SH30-NZ 2.97-3.63 420/30 3.3 303 3000 220 72 AM1M-0503SH30-NZ 4.5-5.5 256/20 3.3 303 3000 220 75 AM1M-0505SH30-NZ 4.5-5.5 256/20 5 200 3000 220 80 AM1M-0512SH30-NZ 4.5-5.5 256/20 12 83 3000 220 80 AM1M-0515SH30-NZ 4.5-5.5 256/20 15 67 3000 220 81 AM1M-1205SH30-NZ 10.8-13.2 106/15 5 200 3000 220 80 AM1M-1212SH30-NZ 10.8-13.2 106/15 12 83 3000 220 80 AM1M-1215SH30-NZ 10.8-13.2 106/15 15 67 3000 220 81 AM1M-1515SH30-NZ 13.5-16.5 84/10 15 67 3000 220 80 AM1M-2405SH30-NZ 21.6-26.4 54/7 5 200 3000 220 79 Models Dual output Max Input Maximum Input Output Full load Isolation Current Full/No Capacitive Efficiency Model Voltage Voltage Output Max Load (mA) (VDC) Load (%) (V) (V) Current (mA) (µF) AM1M-0505D-NZ 4.5-5.5 256/25 ±5 ±100 1500 100 80 AM1M-0509D-NZ 4.5-5.5 256/25 ±9 ±56 1500 100 80 AM1M-0512D-NZ 4.5-5.5 256/25 ±12 ±42 1500 100 80 AM1M-0515D-NZ 4.5-5.5 256/25 ±15 ±34 1500 100 81 AM1M-0524D-NZ 4.5-5.5 256/25 ±24 ±21 1500 100 80 AM1M-1205D-NZ 10.8-13.2 106/15 ±5 ±100 1500 100 80 AM1M-1212D-NZ 10.8-13.2 106/15 ±12 ±42 1500 100 80 AM1M-1224D-NZ 10.8-13.2 106/15 ±24 ±21 1500 100 81 AM1M-1524D-NZ 13.5-16.5 82/12 ±24 ±21 1500 100 81 AM1M-2409D-NZ 21.6-26.4 54/7 ±9 ±56 1500 100 80 AM1M-2412D-NZ 21.6-26.4 54/7 ±12 ±42 1500 100 80 AM1M-2415D-NZ 21.6-26.4 54/7 ±15 ±34 1500 100 80 AM1M-0505DH30-NZ 4.5-5.5 256/20 ±5 ±100 3000 100 79 AM1M-0512DH30-NZ 4.5-5.5 256/20 ±12 ±42 3000 100 80 AM1M-0515DH30-NZ 4.5-5.5 256/20 ±15 ±34 3000 100 81 AM1M-1205DH30-NZ 10.8-13.2 106/15 ±5 ±100 3000 100 80 AM1M-2412DH30-NZ 21.6-26.4 54/7 ±12 ±42 3000 100 81 AM1M-2415DH30-NZ 21.6-26.4 54/7 ±15 ±34 3000 100 80 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.I 1 of 5 North America only Series AM1M-NZ 1 Watt | DC-DC Converter Input Specifications Parameters Nominal Typical Maximum Units 3.3 2.97-3.63 5 4.5-5.5 Voltage range 12 10.8-13.2 VDC 15 13.5-16.5 24 21.6-26.4 3.3V -0.7 - 5 5V -0.7 - 9 Absolute Max Input Voltage 12V -0.7 - 18 VDC (100ms) 15V -0.7 - 21 24V -0.7 - 30 Filter Capacitor Input reflected ripple current 15 mA p-p Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 Sec, <1mA 1500, 3000 VDC Isolation Resistance 500Vdc >1000 MOhm 100KHz/0.1V 20 Isolation Capacitance pF AM1M-0512S-NZ, AM1M-0515S-NZ, AM1M-1205S-NZ only 25 Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy See tolerance envelope graph 3.3Vin, 24Vin & 24Vout models 1s Short Circuit protection Others Continuous, Auto recovery For Vin change of 1% ±1.2 Line voltage regulation % of Vin 3.3Vout models, For Vin change of 1% ±1.5 Load voltage regulation 10% to 100% load ±15 % o Temperature coefficient Nominal input,100% full load ±0.03 %/ C Ripple & Noise 20MHz Bandwidth 60 150 mVp-p NOTE: It is not recommended to have the outputs connected in parallel General Specifications Parameters Conditions Typical Maximum Units 100% load 100 Switching frequency KHz AM1M-0505S-NZ 100 300 o o Operating temperature Without derating up to 85 C -40 to +105 C o Storage temperature -55 to +125 C o Maximum case temperature 100 C Cooling Free Air Convection Humidity 95 % RH Case material Black flame-retardant heat-proof plastic (UL94-V0) 1.4*(Single output models) g Weight 2.4*(Dual output & 3000VDC isolation models) 0.77 x 0.28 x 0.18 inches, 19.50 x 6.60 x 4.50 mm (Single output models) Dimensions (L x W x H) 0.79 x 0.39 x 0.28 inches, 20.00 x 10.00 x 7.00 mm (Dual output & 3000VDC isolation models) o MTBF >3,500,000 hours (MIL-HDBK -217F, Ground Benign, t=+25 C) o Maximum Soldering Temperature 1.5mm from case for 10 seconds 300 C Safety Specifications Parameters EN55022 Class B (see recommended circuit) Standards IEC61000-4-2, Perf. Criteria B (ESD Contact +/- 6KV) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.I 2 of 5 North America only Series AM1M-NZ 1 Watt | DC-DC Converter Pin Out Specifications 1500VDC Isolation 3000VDC Isolation 1500VDC Isolation Single Single Dual Pin Pin Dual Pin 1 +Vin 1 -Vin -Vin 1 -Vin 2 -Vin 7 NC NC 7 NC 5 -Vout 8 +Vout +Vout 8 Common 6 +Vout 9 No Pin Common 9 +Vout 7 NC 10 -Vout -Vout 11 -Vout 8 NC 14 +Vin +Vin 14 +Vin 14 NC NC: not connected Typical Characteristics 3.3V output models Others Tolerance Envelope Graph Tolerance Envelope Graph Typical Load Line Typical Load Line +10% +10% +5% +5% +2.5% +1.0% Nominal Voltage -2.5% -7.5% -7.5% -15% 100% 10% 50% 100% 10% 50% Output Current(%) Output Current(%) Dimensions Single 1500VDC Isolated models Top View 19.50 2.54 (0.77) (0.10) 6 1 2 5 7 14 8 7.62 6.60 Bottom View (0.30) (0.28) 14 8 1 2 5 6 7 Front View Side View 7.62 (0.30) 4.50 5.0 (0.18) (0.197) 3.25 (0.602) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.I 3 of 5 North America only Output Voltage Output Voltage Series AM1M-NZ 1 Watt | DC-DC Converter Dual 1500VDC Isolated models 17.78 (0.70) 20.00 15.24 (0.79) (0.60) 14 9 8 11 1 7 10.00 7.62 Bottom View (0.30) (0.39) 14 11 9 8 1 7 0.50 Ø 1.00 2.54 (0.02) (0.04) (0.10) Side View Dimensions are in mm (inch) Pin Pitch Tolerance: ±0.10 mm (±0.004 inch) 7.00 4.10 Case Tolerance: ±0.25 mm (±0.01 inch) (0.28) (0.16) 4.60 (0.18) 3000VDC Isolated models 17.78 (0.70) 20.00 15.24 (0.79) (0.60) 14 10 9 8 1 7 Ø 1.00 (0.04) 10.00 Bottom View 7.62 (0.39) (0.30) 14 10 9 8 7 1 0.30 0.50 2.54 (0.01) (0.02) (0.10) Side View Dimensions are in mm (inch) Pin Pitch Tolerance: ±0.10 mm (±0.004 inch) 7.00 4.10 Case Tolerance: ±0.25 mm (±0.01 inch) (0.28) (0.16) 4.60 (0.18) Derating Free Air Convection All other models 100 AM1M-0512S-NZ, AM1M-0515S-NZ, AM1M-1205S-NZ 80 60 Safe Operating Area 40 20 0 105 85 80 - 40 - 20 0 20 40 60 100 º C Ambient Temperature www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.I 4 of 5 North America only Output Power (%) Series AM1M-NZ 1 Watt | DC-DC Converter Typical application circuit Single Output +Vout + Vin Vin Cin Vout Cout (VDC) (uF) (VDC) (uF) Cin 3.3/5 4.7 3.3/5 10 Cout DC DC 12/15 2.2 12 2.2 24 1 15 1 - Vout - Vin It is not recommended to connect any external capacitor in the application field when output loading is less than 0.5 watt. Dual Output +Vout + Vin Vin Cin Vout Cout 1 & 2 Cout 1 (VDC) (uF) (VDC) (uF) Cin 3.3/5 4.7 ±5 4.7 Common DC DC 12/15 2.2 ±9/±12 1 Cout 2 24 1 ±15/±24 0.47 - Vout - Vin EMI Recommended Circuit (Class B) LDM 6.8µH +V output +V input DC/DC Cin Converter Cout Load -V input -V output CY 1nF 24V input only NOTE: Cin and Cout values are the same as referenced in the Application Circuit. NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R8.I 5 of 5 North America only