AIMTEC AM1P-0515S-NZ

Click on Series name for product info on aimtec.com Series AM1P-NZ 1 Watt | DC-DC Converter FEATURES: o o  RoHS compliant  Operating temperature -40 C to + 85 C  8 Pin DIP Package  Input / Output isolation 1000 VDC  Low ripple and noise  Pin computable with multiple manufacturers  High efficiency up to 79%  UL94-VO Package Models Single output Input Voltage Output Voltage Output Current Isolation Efficiency Model (V) (V) max (mA) (VDC) (%) AM1P-0505S-NZ 4.5-5.5 5 200 1000 78 AM1P-1215S-NZ 10.8-13.2 15 67 1000 79 Input Specifications Parameters Nominal Typical Maximum Units 5 4.5-5.5 Voltage range VDC 12 10.8-13.2 Filter Capacitor Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1000 VDC Resistance > 1000 MOhm Capacitance 60 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy See tolerance graph Short Circuit protection Momentary (1 sec) Line voltage regulation For 1.0% Vin ±1.2 % of Vin Load voltage regulation Load 10 – 100% 10 % o Temperature coefficient ±0.03 %/ C Ripple & Noise At 20 MHz Bandwidth 75 m Vp-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 150 KHz o Operating temperature Without derating -40 to +85 C o Storage temperature -55 to +125 C o Case temperature 90 C Cooling Free air convection Humidity 90 % Case material Plastic UL94-VO Weight 1.8 g Dimensions (L x W x H) 0.46 x 0.39x 0.30 inches 11.70 x 9.80 x 7.70 mm o MTBF >1 000 000 hrs(MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency approvals CE Standards IEC60950-1 :2001 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.I 1 of 2 North America only Series AM1P-NZ 1 Watt | DC-DC Converter Pin Out Specifications External capacitor Pin Single External External Vin Vout capacitor capacitor 1 - V Input (VDC) (VDC) 4 +V Input (uF) (uF) 5 +V Output 5 4.7 5 10 12 2.2 9 4.7 6 No pin 24 1 12 2.2 7 -V Output - - 15 1 8 No pin Dimensions Filtering 7.62 11.70 0.50 (0.46) (0.30) (0.02) 14 7.62 9.80 Bottom View (0.39) (0.30) 8 7 6 5 2.54 (0.10) 7.70 (0.30) 4.10 0.50 (0.16) (0.02) 2.54 (0.10) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.I 2 of 2 North America only