AIMTEC AM1PS-1515S-NZ

Click on Series name for product info on aimtec.com Series AM1PS-NZ 1 Watt | DC-DC Converter FEATURES: o o  Unregulated  Operating temperature -40 C to + 105 C  8 Pin DIP Package  Input / Output isolation 1500 VDC  Low ripple and noise  Pin compatible with multiple manufacturers  High efficiency up to 82%  Continuous Short Circuit Protection ‡ Models Single output Max. Input Voltage Output Voltage Output Current Isolation Efficiency Model Capacitive (V) (V) max (mA) (VDC) (%) Load (µF) AM1PS-0303S-NZ 2.97-3.63 3.3 303 1500 220 75 AM1PS-0305S-NZ 2.97-3.63 5 200 1500 220 80 AM1PS-0503S-NZ 4.5-5.5 3.3 303 1500 220 76 AM1PS-0505S-NZ 4.5-5.5 5 200 1500 220 80 AM1PS-0509S-NZ 4.5-5.5 9 111 1500 220 80 AM1PS-0512S-NZ 4.5-5.5 12 84 1500 220 81 AM1PS-0515S-NZ 4.5-5.5 15 67 1500 220 81 AM1PS-0524S-NZ ‡ 4.5-5.5 24 42 1500 220 81 AM1PS-1203S-NZ 10.8-13.2 3.3 303 1500 220 76 AM1PS-1205S-NZ 10.8-13.2 5 200 1500 220 80 AM1PS-1209S-NZ 10.8-13.2 9 110 1500 220 80 AM1PS-1212S-NZ 10.8-13.2 12 83 1500 220 81 AM1PS-1215S-NZ 10.8-13.2 15 67 1500 220 80 AM1PS-2403S-NZ 21.6-26.4 3.3 303 1500 220 76 AM1PS-2405S-NZ 21.6-26.4 5 200 1500 220 80 AM1PS-2409S-NZ 21.6-26.4 9 110 1500 220 80 AM1PS-2412S-NZ 21.6-26.4 12 83 1500 220 81 AM1PS-2415S-NZ 21.6-26.4 15 67 1500 220 82 AM1PS-2424S-NZ 21.6-26.4 24 42 1500 220 82 ‡ With Momentary short circuit protection of 1 second Input Specifications Parameters Nominal Typical Maximum Units 3.3 2.97-3.63 5 4.5-5.5 Voltage range 12 10.8-13.2 VDC 15 13.5-16.5 24 21.6-26.4 3.3 5 5 9 Absolute Max Rating (1 sec. max.) 12 18 VDC 15 21 24 30 Filter Capacitor Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1500 VDC Resistance > 1000 MOhm Capacitance 20 pF www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.C 1 of 3 North America only Series AM1PS-NZ 1 Watt | DC-DC Converter Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy See tolerance graph ±5 % Short Circuit protection Continuous, unless marked with ‡ For 1.0% Vin, 3.3V Model ±1.5 Line voltage regulation % of Vin For 1.0% Vin, Other Model ±1.2 Load voltage regulation Load 10 – 100% 12 % o Temperature coefficient ±0.03 %/ C Ripple & Noise At 20 MHz Bandwidth 60 m Vp-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100 - 300 KHz o o Operating temperature Derating above 85 C -40 to +105 C o Storage temperature -55 to +125 C o Maximum case temperature 125 C Cooling Free air convection Humidity Non condensing 95 % Case material Plastic UL94-VO o Lead Soldering Temperature 1.5mm from Lead, 10 sec max. 300 C Weight 1.8 g Dimensions (L x W x H) 0.50 x 0.39 x 0.32 inches 12.70 x 10.00 x 8.20 mm o MTBF >3500K hrs(MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency approvals cULus (without 3.3 input and output models) Standards UL 60950-1 Pin Out Specifications Dimensions Pin Single 1 - V Input 7.62 12.70 0.50 4 +V Input (0.30) (0.50) (0.02) 5 +V Output 6 No pin 1 4 7 -V Output 8 No pin 7.62 10.0 Bottom View (0.30) (0.39) 8 7 6 5 2.54 (0.10) 8.20 (0.32) 4.10 0.50 (0.16) (0.02) 2.54 (0.10) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.C 2 of 3 North America only Typical load line Series AM1PS-NZ 1 Watt | DC-DC Converter Derating Free Air Convection º 85 C 100 80 Safe Operating Area 60 40 20 0 105 85 80 - 40 - 20 0 20 40 60 100 Ambient Temperatur e º C Typical Characteristics 10 % 5 % +2.5 % Rated Output Voltage -2.5 % -7.5 % 70 % 50 100 10 % % % Output Current % (Nominal Input) Recommended Circuit for EMI Class B Vin+ Vin+ Vo+ 6.8µH 4.7 µF Aimtec DC/DC 50V Converter Vin- Vo- Vin- NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.C 3 of 3 North America only Output Power (%) Output Voltage Accuracy% Load