AIMTEC AM20EW-4805DZ

Click on Series name for product info on aimtec.com Series AM20EW-Z 20 Watt | DC-DC Converter FEATURES:  RoHS Compliant  Soft start  Ultra wide 4:1 Input range  Industrial temperature range -40 to +85°C  Adjustable Output Voltage  High efficiency up to 91%  Remote On/Off  No minimum load required  2” x 1” package Models Single output Output Maximum Input Voltage Output Current Efficiency Model Voltage capacitive load (V) max (A) (%) (V) (µF) AM20EW-2403SZ 9-36 3.3 5.5 10000 89 AM20EW-2405SZ 9-36 5 4 6800 91 AM20EW-2412SZ 9-36 12 1.67 1000 89 AM20EW-2415SZ 9-36 15 1.33 680 89 AM20EW-4803SZ 18-75 3.3 5.5 10000 89 AM20EW-4805SZ 18-75 5 4 6800 91 AM20EW-4812SZ 18-75 12 1.67 1000 89 AM20EW-4815SZ 18-75 15 1.33 680 89 Add suffix “-K” for optional heatsink Models Dual output Output Maximum Input Voltage Output Current Efficiency Model Voltage capacitive load (V) max (A) (%) (V) (µF) AM20EW-2405DZ 9-36 ±5 ±2 ±2200 89 AM20EW-2412DZ 9-36 ±12 ±0.835 ±470 88 AM20EW-2415DZ 9-36 ±15 ±0.665 ±330 89 AM20EW-4805DZ 18-75 ±5 ±2 ±2200 89 AM20EW-4812DZ 18-75 ±12 ±0.835 ±470 88 AM20EW-4815DZ 18-75 ±15 ±0.665 ±330 89 Add suffix “-K” for optional heatsink Input Specifications Parameters Nominal Typical Maximum Units 24 9-36 Voltage range VDC 48 18-75 24 7.9 8.6 Under voltage lockout VDC 48 16 17.8 Filter  (Pi) Network Turn on Transient process time 250 µs Transient Recovery deviation ±3 % Startup time 20 ms 24 -0.7~50 Absolute Maximum Rating VDC 48 -0.7~100 Peak Input Voltage time 100 ms ON: 3 ~12VDC or open circuit On/Off Control OFF: 0 ~ 1.2VDC or Short circuit between pin 2 and pin 1 OFF idle current 5 mA Input Reflected ripple current 20 mA p-p www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.J 1 of 6 North America only Series AM20EW-Z 20 Watt | DC-DC Converter Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 1600 VDC Case/Input Isolation tested voltage 3 sec 1600 VDC Resistance >1000 MOhm Capacitance 1200 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±1 % Over voltage protection Zener diode clamp Over current protection 120 % of FL Short Circuit protection Continuous Short Circuit restart Auto recovery Line voltage regulation HL-LL ±0.5 % of Vin Load voltage regulation (Single) 0-100% load ±0.5 % Load voltage regulation (Dual) Balanced load ±1 % 25% load on first output and Cross regulation (Dual output model) ±5 % 100% load on second output o Temperature coefficient ±0.02 %/ C Ripple & Noise At 20MHz Bandwidth 75 mV p-p Voltage adjustment range ±10 % General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz o Operating temperature With derating above 65°C -40 to +85 C o Storage temperature -40 to +125 C o Max Case temperature 105 C Cooling Free air convection Humidity 95 % RH Case material Nickel coated copper with non conductive base Potting material UL94V-0 rated Weight 30 g Dimensions (L X W X H) Tolerance ±0.5mm (±0.02 inches) 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.16 mm o MTBF >560 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approvals CE EN55022, class A - with external circuit recommended on page 5 EN55024 EN61000-4-2, criteria B EN61000-4-3, criteria A Standards EN61000-4-4, criteria B – with external filter capacitor, 220µF/100V EN61000-4-5, criteria B – with external filter capacitor, 220µF/100V EN61000-4-6, criteria A EN61000-4-8, criteria A NOTE: Designed to meet IEC/EN 60950-1 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.J 2 of 6 North America only Series AM20EW-Z 20 Watt | DC-DC Converter Pin Out Specifications Pin Single Dual 1 On/Off Control On/Off Control 2 -V Input -V Input 3 +V Input +V Input 4 -V Output -V Output 5 Trim Common 6 +V Output +V Output Dimensions 50.80 (2.00) 6 3 5 Bottom View 2 1 4 15.24 20.32 15.24 (0.60) (0.80) (0.60) Notes: All dimensions are typical in millimeters (inches). Tolerance ±0.25 (±0.01) DIA 1.00 (0.04) Pin Diameter: 1.0±0.05mm (0.04±0.002 inches) Pin pitch tolerance: ±0.35mm (±0.014 inches) Dimensions with Optional Heatsink 50.8 25.4 (2.0) (1.0) 16.3 (0.64) SIDE END Notes: Add “-K” suffix for ordering, heatsink is affixed with thermally dissipative adhesive tape. See derating graph for temperature performance. Heatsink material is anodized (black) aluminum, adds weight 11.2g to total mass (42.2g). Thermal impedance of converter is: with heatsink 10℃/W and 12℃/W without heatsink. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.J 3 of 6 North America only 10.16 25.40 (0.40) (1.00) 5.08 (0.20) 7.62 10.16 5.08 (0.30) (0.40) (0.20) 10.16 10.16 (0.40) (0.40) 2.54 2.54 (0.10) (0.10) Series AM20EW-Z 20 Watt | DC-DC Converter Trimming Trim Table AM20E(W)-xx03SZ AM20E(W)-xx05SZ AM20E(W)-xx12SZ AM20E(W)-xx15SZ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.J 4 of 6 North America only Series AM20EW-Z 20 Watt | DC-DC Converter Derating Free Air Convection 65 ºC 100 72 ºC Heatsink 80 60 Safe Operating Area 40 20 72 65 0 85 -40 -25 0 20 40 60 80 100 º C Ambient Temperature Extended temperature performance can be achieved with optional heat sink. (add suffix “–K” to part number) Recommended external circuit to meet the required conducted emissions Location Type Value C1 1210 2.2µF/100V C2 1210 2.2µF/100V L 12µH These components should be mounted as close as possible to the converter module and length of the leads should be kept shorter to decrease radiated noise. Surge/EFT www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.J 5 of 6 North America only Output Power % Series AM20EW-Z 20 Watt | DC-DC Converter NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.J 6 of 6 North America only