AIMTEC AM2D-2409D-NZ

Click on Series name for product info on aimtec.com Not recommended for new design Series AM2D-NZ Use AM2D-Z series 2 Watt | DC-DC Converter FEATURES: • RoHS Compliant • Input / Output Isolation 1000, 3000VDC o o • Low ripple and noise • Operating temperature -40 C to + 105 C • High efficiency up to 89% • Pin compatible with multiple manufacturers • UL94-VO case • 7 pin SIP package • Continuous Short Circuit Protection Models Single output Output Input Voltage Output Current Isolation Efficiency Model Voltage (%) (V) max(mA) (VDC) (V) AM2D-0505S-NZ 4.5-5.5 5 400 1000 89 AM2D-0509S-NZ 4.5-5.5 9 222 1000 84 AM2D-0512S-NZ 4.5-5.5 12 167 1000 84 AM2D-0515S-NZ 4.5-5.5 15 134 1000 84 AM2D-1205S-NZ 10.8-13.2 5 400 1000 84 AM2D-1209S-NZ 10.8-13.2 9 222 1000 84 AM2D-1212S-NZ 10.8-13.2 12 167 1000 84 AM2D-1215S-NZ 10.8-13.2 15 134 1000 84 AM2D-2405S-NZ 21.6-26.4 5 400 1000 84 AM2D-2409S-NZ 21.6-26.4 9 222 1000 84 AM2D-2412S-NZ 21.6-26.4 12 167 1000 84 AM2D-2415S-NZ 21.6-26.4 15 134 1000 84 AM2D-0505SH30-NZ 4.5-5.5 5 400 3000 80 AM2D-0509SH30-NZ 4.5-5.5 9 222 3000 81 AM2D-0512SH30-NZ 4.5-5.5 12 167 3000 82 AM2D-0515SH30-NZ 4.5-5.5 15 134 3000 84 AM2D-1205SH30-NZ 10.8-13.2 5 400 3000 80 AM2D-1209SH30-NZ 10.8-13.2 9 222 3000 83 AM2D-1212SH30-NZ 10.8-13.2 12 167 3000 84 AM2D-1215SH30-NZ 10.8-13.2 15 134 3000 85 AM2D-2405SH30-NZ 21.6-26.4 5 400 3000 81 AM2D-2409SH30-NZ 21.6-26.4 9 222 3000 84 AM2D-2412SH30-NZ 21.6-26.4 12 167 3000 85 AM2D-2415SH30-NZ 21.6-26.4 15 134 3000 86 Models Dual output Input Voltage Output Voltage Output Current Isolation Efficiency Model (V) (V) max (mA) (VDC) (%) AM2D-0505D-NZ 4.5-5.5 ±5 ±200 1000 80 AM2D-0509D-NZ 4.5-5.5 ±9 ±111 1000 84 AM2D-0512D-NZ 4.5-5.5 ±12 ±83 1000 84 AM2D-0515D-NZ 4.5-5.5 ±15 ±67 1000 84 AM2D-1205D-NZ 10.8-13.2 ±5 ±200 1000 80 AM2D-1209D-NZ 10.8-13.2 ±9 ±111 1000 84 AM2D-1212D-NZ 10.8-13.2 ±12 ±83 1000 85 AM2D-1215D-NZ 10.8-13.2 ±15 ±67 1000 84 AM2D-2405D-NZ 21.6-26.4 ±5 ±200 1000 80 AM2D-2409D-NZ 21.6-26.4 ±9 ±111 1000 84 AM2D-2412D-NZ 21.6-26.4 ±12 ±83 1000 84 AM2D-2415D-NZ 21.6-26.4 ±15 ±67 1000 84 AM2D-0505DH30-NZ 4.5-5.5 ±5 ±200 3000 82 AM2D-0509DH30-NZ 4.5-5.5 ±9 ±111 3000 83 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.M 1 of 4 North America only11 Not recommended for new design Series AM2D-NZ Use AM2D-Z series 2 Watt | DC-DC Converter Models Dual output (continued) Input Voltage Output Voltage Output Current Isolation Efficiency Model (V) (V) max (mA) (VDC) (%) AM2D-0512DH30-NZ 4.5-5.5 ±12 ±83 3000 85 AM2D-0515DH30-NZ 4.5-5.5 ±15 ±67 3000 85 AM2D-1205DH30-NZ 10.8-13.2 ±5 ±200 3000 83 AM2D-1209DH30-NZ 10.8-13.2 ±9 ±111 3000 84 AM2D-1212DH30-NZ 10.8-13.2 ±12 ±83 3000 86 AM2D-1215DH30-NZ 10.8-13.2 ±15 ±67 3000 86 AM2D-2405DH30-NZ 21.6-26.4 ±5 ±200 3000 84 AM2D-2409DH30-NZ 21.6-26.4 ±9 ±111 3000 85 AM2D-2412DH30-NZ 21.6-26.4 ±12 ±83 3000 87 AM2D-2415DH30-NZ 21.6-26.4 ±15 ±67 3000 87 Input Specifications Parameters Nominal Typical Maximum Units 5 4.5-5.5 Voltage range 12 10.8-13.2 VDC 24 21.6-26.4 Filter Capacitor Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1000 and 3000 VDC Resistance > 1000 MOhm Capacitance 60 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy See tolerance graph Voltage balance Dual output ±1 % Short Circuit protection Continuous automatic recovery Line voltage regulation (Single) For 1.0% of Vin ±1.2 % Line voltage regulation (Dual) For 1.0% of Vin ±1.2 % Load voltage regulation (Single) Load 10~100% ±8 % Load voltage regulation (Dual) Load 10~100% ±8 % o Temperature coefficient ±0.03 %/ C Ripple & Noise At 20MHz Bandwidth 75 mV p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100 300 KHz o Operating temperature -40 to +75 C o Storage temperature -55 to +125 C o Max Case temperature +105 C Cooling Free air convection Humidity 95 % Case material Plastic UL94-VO Weight 2.4 g Dimensions (L x W x H) 0.772 x 0.276 x 0.394 inch 19.60 x 7.00 x 10.0 mm o MTBF >3 500 000hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.M 2 of 4 North America only11 Typical load line Not recommended for new design Series AM2D-NZ Use AM2D-Z series 2 Watt | DC-DC Converter Safety Specifications Parameters Agency approvals Designed to meet Standards EN55022 Class B (with recommended circuit) IEC / EN61000-4-2 Contact ±6K Criteria B IEC / EN61000-4-2 Contact ±8K Criteria B Pin Out Specifications Pin 1000VDC 3000VDC Single Dual Single Dual 1 + V Input + V Input + V Input + V Input 2 - V Input - V Input - V Input - V Input 4 -V Output - V Output No pin No pin 5 No pin Common -V Output -V Output 6 + V Output + V Output No pin Common 7 No pin No pin +V Output +V Output Dimensions 19.60 7.00 (0.77) (0.267) PRINTED FACE 9.50 10.00 (0.37) (0.39) 4.10 0.50 (0.16) (0.02) 2.54 (0.10) 15.20 (0.60) 0.50 NOTE: Unit:mm [inch] (0.02) Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 7.00 0.50 (0.26) (0.02) 0.25 (0.01) 1.25 (0.05) Typical characteristics Tolerance Envelope Graph +10% +5% +2.5% -2.5% Nominal -7.5% Voltage 10% 50% 100% Output Current (%) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.M 3 of 4 North America only11 Output Voltage (%) Not recommended for new design Series AM2D-NZ Use AM2D-Z series 2 Watt | DC-DC Converter Typical EMI Filter Vin+ Vin+ Vo+ LDM 6.8µH 4.7µF / Aimtec DC/DC 50V Converter Vin- Vo- Vin- * -470pF / *- Optional for 12 & 15V 3KV output Models Derating Free Air Convection º 85 C 100 80 Safe Operating Area 60 40 20 0 105 85 80 100 - 40 - 20 0 20 40 60 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.M 4 of 4 North America only11 Output Power (%) Load