AIMTEC AM2DS-2403D-NZ

Click on Series name for product info on aimtec.com Series AM2DS-NZ 2 Watt | DC-DC Converter FEATURES: ° °  Unregulated  Operating temperature -40 C to + 105 C  High efficiency up to 86%  Continuous short circuit protection ‡  7 pin SIP package  Pin compatible with multiple manufacturers  1500 & 3000VDC Isolation Models Single output Output Output Input Isolation Max Cap Efficiency Model Voltage Current max Voltage (V) (VDC) Load (µF) (%) (V) (mA) AM2DS-0503S-NZ 4.5-5.5 3.3 400 1500 220 84 AM2DS-0505S-NZ 4.5-5.5 5 400 1500 220 84 AM2DS-0509S-NZ 4.5-5.5 9 222 1500 220 86 AM2DS-0512S-NZ 4.5-5.5 12 167 1500 220 84 AM2DS-0515S-NZ 4.5-5.5 15 133 1500 220 84 AM2DS-0524S-NZ ‡ 4.5-5.5 24 83 1500 220 84 AM2DS-1203S-NZ 10.8-13.2 3.3 400 1500 220 80 AM2DS-1205S-NZ 10.8-13.2 5 400 1500 220 80 AM2DS-1209S-NZ 10.8-13.2 9 222 1500 220 86 AM2DS-1212S-NZ 10.8-13.2 12 167 1500 220 84 AM2DS-1215S-NZ 10.8-13.2 15 133 1500 220 84 AM2DS-1224S-NZ ‡ 10.8-13.2 24 83 1500 220 83 AM2DS-2403S-NZ ‡ 21.6-26.4 3.3 400 1500 220 80 AM2DS-2405S-NZ ‡ 21.6-26.4 5 400 1500 220 84 AM2DS-2412S-NZ ‡ 21.6-26.4 12 167 1500 220 86 AM2DS-2415S-NZ ‡ 21.6-26.4 15 133 1500 220 84 AM2DS-2424S-NZ ‡ 21.6-26.4 24 83 1500 220 85 AM2DS-0505SH30-NZ 4.5-5.5 5 400 3000 220 80 AM2DS-0512SH30-NZ 4.5-5.5 12 167 3000 220 84 AM2DS-0515SH30-NZ 4.5-5.5 15 133 3000 220 84 AM2DS-0524SH30-NZ ‡ 4.5-5.5 24 83 3000 220 84 AM2DS-1205SH30-NZ 10.8-13.2 5 400 3000 220 80 AM2DS-1212SH30-NZ 10.8-13.2 12 167 3000 220 84 AM2DS-1215SH30-NZ 10.8-13.2 15 133 3000 220 84 AM2DS-2405SH30-NZ ‡ 21.6-26.4 5 400 3000 220 80 AM2DS-2409SH30-NZ ‡ 21.6-26.4 9 222 3000 220 86 AM2DS-2412SH30-NZ ‡ 21.6-26.4 12 167 3000 220 86 AM2DS-2415SH30-NZ ‡ 21.6-26.4 15 133 3000 220 84 AM2DS-2424SH30-NZ ‡ 21.6-26.4 24 83 3000 220 85 Models Dual output Output Input Output Current Isolation Max Cap Efficiency Model Voltage Voltage (V) max (mA) (VDC) Load (µF) (%) (V) AM2DS-0505D-NZ 4.5-5.5 ±5 ±200 1500 100 80 AM2DS-0509D-NZ 4.5-5.5 ±9 ±111 1500 100 82 AM2DS-0512D-NZ 4.5-5.5 ±12 ±83 1500 100 84 AM2DS-0515D-NZ 4.5-5.5 ±15 ±67 1500 100 84 AM2DS-0524D-NZ ‡ 4.5-5.5 ±24 ±42 1500 100 84 AM2DS-1205D-NZ 10.8-13.2 ±5 ±200 1500 100 84 AM2DS-1209D-NZ 10.8-13.2 ±9 ±111 1500 100 84 AM2DS-1212D-NZ 10.8-13.2 ±12 ±83 1500 100 85 AM2DS-1215D-NZ 10.8-13.2 ±15 ±67 1500 100 84 AM2DS-1515D-NZ 13.5-16.5 ±15 ±67 1500 100 85 AM2DS-2405D-NZ ‡ 21.6-26.4 ±5 ±200 1500 100 84 AM2DS-2409D-NZ ‡ 21.6-26.4 ±9 ±111 1500 100 84 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 1 of 5 North America only Series AM2DS-NZ 2 Watt | DC-DC Converter AM2DS-2412D-NZ ‡ 21.6-26.4 ±12 ±83 1500 100 84 AM2DS-2415D-NZ ‡ 21.6-26.4 ±15 ±67 1500 100 84 AM2DS-0505DH30-NZ 4.5-5.5 ±5 ±200 3000 100 80 AM2DS-0509DH30-NZ 4.5-5.5 ±9 ±111 3000 100 82 AM2DS-0512DH30-NZ 4.5-5.5 ±12 ±83 3000 100 84 AM2DS-0515DH30-NZ 4.5-5.5 ±15 ±67 3000 100 84 AM2DS-0524DH30-NZ ‡ 4.5-5.5 ±24 ±42 3000 100 84 AM2DS-1205DH30-NZ 10.8-13.2 ±5 ±200 3000 100 84 AM2DS-1209DH30-NZ 10.8-13.2 ±9 ±111 3000 100 84 AM2DS-1212DH30-NZ 10.8-13.2 ±12 ±83 3000 100 85 AM2DS-1215DH30-NZ 10.8-13.2 ±15 ±67 3000 100 84 AM2DS-2405DH30-NZ ‡ 21.6-26.4 ±5 ±200 3000 100 84 AM2DS-2409DH30-NZ ‡ 21.6-26.4 ±9 ±111 3000 100 84 AM2DS-2412DH30-NZ ‡ 21.6-26.4 ±12 ±83 3000 100 84 AM2DS-2415DH30-NZ ‡ 21.6-26.4 ±15 ±67 3000 100 84 ‡ With Momentary short circuit protection of 1 second NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 5 4.5-5.5 12 10.8-13.2 Voltage range VDC 15 13.5-16.5 24 21.6-26.4 Filter Capacitor 5 9 Absolute Maximum Rating 12 18 VDC (1 sec. max.) 15 21 24 30 Reflected Ripple Input Current 15 mA Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 1500, 3000 VDC Resistance 500VDC > 1000 MOhm Capacitance (100Khz/0.1V) 20 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy (see tolerance chart) ±5 % Short Circuit protection Continuous, unless marked with ‡ Short circuit restart Auto recovery 3.3V models ±1.5 Line voltage regulation For ±1.0% change of Vin % of Vin Others ±1.2 Load voltage regulation load 10~100% 12 % o Temperature coefficient ±0.03 %/ C Ripple & Noise 20MHz Bandwidth 75 mV p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100 - 300 KHz o o Operating temperature Derating Above 85 C -40 to +105 C o Storage temperature -55 to +125 C Humidity 95 % RH Case material Non-conductive black plastic (UL94V-0 rated) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 2 of 5 North America only Series AM2DS-NZ 2 Watt | DC-DC Converter Weight 2.4 g Dimensions (L x W x H) 0.77 x 0.27 x 0.39inches 19.6 x 7.00 x 10.00mm o MTBF >3,500,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) o Maximum soldering temperature 1.5 mm from case for 10sec 300 C o Maximum case temperature 125 C Cooling Free air convection Safety Specifications Parameters cULus (without 15V input and without 3.3V output models) Agency approvals Standards UL 60950-1 Pin Out Specifications Pin 1500 VDC 3000VDC Single Dual Single Dual 1 + V Input + V Input + V Input + V Input 2 - V Input - V Input - V Input - V Input 4 - V Output - V Output No pin No pin 5 No pin Common - V Output - V Output 6 + V Output + V Output No pin Common 7 No pin No pin + V Output + V Output Dimensions 19.60 7.00 (0.77) (0.27) PRINTED FACE 10.0 10.0 (0.39) (0.39) 4.10 0.50 (0.16) (0.02) 2.54 (0.10) 15.20 (0.60) 0.50 NOTE: Unit:mm [inch] (0.02) Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 7.00 0.50 (0.27) (0.02) 0.30 (0.01) 0.90 (0.04) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 3 of 5 North America only Typical load line Series AM2DS-NZ 2 Watt | DC-DC Converter Typical characteristics 10 % 5 % +2.5 % Rated Output Voltage -2.5 % -7.5 % 70 % 50 100 10 % % % Output Current % (Nominal Input) Test Circuit Input Reflected Ripple Current& EMI Recommended Circuit Test Point EMI Recommended Circuit to meet EN55022 Class B Vin+ Vin+ Vin+ Vo+ Vin+ Vo+ 4.7µH 6.8µH 220µF Aimtec DC/DC Aimtec DC/DC 4.7µF / Converter Converter 50V Vin- Vin- Vo- Vo- Vin- Vin- Recommended Circuits to Lower Ripple & Noise Single Vin+ Capacitor selection Table Vo+ Vin C1 Single C2 Dual C2/C3 VDC VDC 3.3 / ±3.3 / C2 5 4.7 µF 10µF 4.7 µF C1 5V ±5V 12 2.2µF 12 V 2.2µF ±12 V 1 µF Vin- 15 2.2µF 15 V 1µF ±15 V 0.47 µF Vo- 24 1µF 24 V 1 µF ±24 V 0.47 µF Dual 1) Ensure output load of Min 10%, or specifications may not be met Vin+ Vo+ 2) Under normal operation, there is no protection for overload condition C2 3) Converter may exhibit start up delay if capacitive load exceeds Com recommended C1 4) Ceramic or electrolytic type capacitors are recommended, C3 tantalum type may damage converter Vin- Vo- 5) Parallel connections, or hot swapping is not recommended www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 4 of 5 North America only Output Voltage Accuracy% Load Load Series AM2DS-NZ 2 Watt | DC-DC Converter Derating Free Air Convection º 85 C 100 80 Safe Operating Area 60 40 20 0 105 85 - 20 80 100 - 40 0 20 40 60 º C Ambient Temperature NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 5 of 5 North America only Output Power (%)