AIMTEC AM2LS-2403S-NZ

Click on Series name for product info on aimtec.com Series AM2LS-NZ 2 Watt | DC-DC Converter FEATURES: • SMD Package • Single Output Models o o • Efficiency up to 86% • Operating temperature -40 C to +105 C • Unregulated • Input / Output Isolation 1500 & 3000 VDC • Industry Standard Pinout • Continuous Short Circuit Protection for 1500VDC models only Models Single output Output Output Max Input Voltage Isolation Efficiency Model Voltage Current Max Capacitive (V) (VDC) (%) (V) (mA) Load(uF) AM2LS-0503S-NZ 4.5-5.5 3.3 400 1500 220 71 AM2LS-0505S-NZ 4.5-5.5 5 400 1500 220 79 AM2LS-0509S-NZ 4.5-5.5 9 222 1500 220 82 AM2LS-0512S-NZ 4.5-5.5 12 167 1500 220 82 AM2LS-0515S-NZ 4.5-5.5 15 133 1500 220 83 AM2LS-1205S-NZ 10.8-13.2 5 400 1500 220 79 AM2LS-1209S-NZ 10.8-13.2 9 222 1500 220 82 AM2LS-1212S-NZ 10.8-13.2 12 167 1500 220 82 AM2LS-1215S-NZ 10.8-13.2 15 133 1500 220 83 AM2LS-1224S-NZ 10.8-13.2 24 83 1500 220 84 AM2LS-1515S-NZ 13.5-16.5 15 133 1500 220 83 AM2LS-2405S-NZ 21.6-26.4 5 400 1500 220 79 AM2LS-2409S-NZ 21.6-26.4 9 222 1500 220 82 AM2LS-2412S-NZ 21.6-26.4 12 167 1500 220 82 AM2LS-2415S-NZ 21.6-26.4 15 133 1500 220 83 AM2LS-2424S-NZ 21.6-26.4 24 83 1500 220 86 AM2LS-0505SH30-NZ 4.5-5.5 5 400 3000 220 79 AM2LS-0509SH30-NZ 4.5-5.5 9 222 3000 220 82 AM2LS-0512SH30-NZ 4.5-5.5 12 167 3000 220 82 AM2LS-0515SH30-NZ 4.5-5.5 15 133 3000 220 83 AM2LS-1205SH30-NZ 10.8-13.2 5 400 3000 220 79 AM2LS-1212SH30-NZ 10.8-13.2 12 167 3000 220 82 AM2LS-1215SH30-NZ 10.8-13.2 15 133 3000 220 83 AM2LS-1224SH30-NZ 10.8-13.2 24 83 3000 220 84 AM2LS-1515SH30-NZ 13.5-16.5 15 133 3000 220 83 AM2LS-2405SH30-NZ 21.6-26.4 5 400 3000 220 79 AM2LS-2412SH30-NZ 21.6-26.4 12 167 3000 220 82 AM2LS-2415SH30-NZ 21.6-26.4 15 133 3000 220 83 AM2LS-2424SH30-NZ 21.6-26.4 24 83 3000 220 84 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 5 4.5-5.5 12 10.8-13.2 Voltage range VDC 15 13.5-16.5 24 21.6-26.4 5 30 12 25 Quiescent Current mA 15 18 24 15 Reflected Input Ripple Current 15 mA 5 Vin 9 12 Vin 18 Absolute Max Input (1sec max) VDC 15 Vin 21 24 Vin 30 Filter Capacitor www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.H 1 of 4 North America only Series AM2LS-NZ 2 Watt | DC-DC Converter Isolation Specifications Parameters Conditions Typical Maximum Units Tested I/O voltage 60 sec 1500 & 3000 VDC Resistance 500VDC >1000 MOhm Capacitance 20 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 100% load (see tolerance chart) ±2.5 % Continuous 12 & 15 VDC input models 1500VDC models only Short Circuit protection Auto Recovery 5 & 24 VDC Input models & 3000VDC models 1 Sec For ±1% of Vin ±1.5 Line voltage regulation % of Vin 3.3V models only ±1.2 3.3V 18 5 V 12 Load voltage regulation 9 V 9 % (10% - 100% load) 12 V 8 15 V 7 24 V 6 o Temperature coefficient 100% load ±0.03 %/ C Ripple & Noise At 20 MHz Bandwidth 150 mV p-p * Products with 5Vdc and 24Vdc input voltage; the supply voltage must be discontinued at the end of short circuit duration. General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100 300 KHz With derating o Operating temperature 3.3V & 5V above +71C -40 to +105 C Others +85C o Storage temperature -55 to +125 C Cooling Free air convection Storage Humidity Non Condensing 95 % RH Case material Epoxy resin (UL94-V0) 1500VDC models 1.4 Weight g 3000VDC models 1.6 Dimensions (L x W x H) 0.50 x 0.44 x 0.28 inches 12.70 x 11.20 x 7.25 mm o MTBF >3,500,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) o Maximum soldering temperature 1.5mm from case for 10 sec 300 C o Maximum case temperature 105 C Safety Specifications Parameters EN 55022, Class B, with external filter Standards IEC 61000-4-2, Contact ±8KV, Criteria B www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.H 2 of 4 North America only Series AM2LS-NZ 2 Watt | DC-DC Converter Pin Out Specifications Dimensions Single Output Models Single Pin Front View Output 8.3 Side View (0.32) 1 - V Input 2 + V Input 3 No Pin 5.00 (0.19) 4 .-V Output 5 +V Output 2.0 0º~10º angle (0.08) 0.25 6 No Pin (0.01) 7 No Pin 8 N.C. 1.45 0.88 (0.06) (0.04) Top View 12.70 (0.50) 7.62 (0.30) 11.20 8.30 (0.44)(0.32) 1 0.60 2.54 (0.02) (0.10) Recommended Circuits (EMI Class B) LDM 6.8µH Capacitor selection Table Vout C3 3.3 V 10 µF +V output +V input 5 V 10 µF C1 C2 4.7µF/ 4.7µF/ 9 V 4.7 µF DC/DC 50V 50V Converter 12 V 2.2 µF C3 Load 15 V 1 µF 24V 0.47 µF -V input -V output CY 24V input only www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.H 3 of 4 North America only Typical load line Series AM2LS-NZ 2 Watt | DC-DC Converter Load Accuracy Tolerance Graph Derating Free Air Convection 10 % ºC 71 5 % 100 ºC 85 +2.5 % Rated Output 3.3V & 5V 80 Voltage -2.5 % Others Safe Operating Area 60 -7.5 % 50% 40 70 % 20 50 100 10 105C 71C 85C % % 0 % Output Current % (Nominal Input) -50 -30 0 40 80 100 120 º C Ambient Temperature NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.H 4 of 4 North America only Output Voltage Accuracy% Output Power %