AIMTEC AM30EW-2415DZ

Click on Series name for product info on aimtec.com Series AM30EW-Z 30 Watt | DC-DC Converter FEATURES:  Ultra Wide 4:1 input range  Remote on/off control  Efficiency up to 91%  Input/Output Isolation 1600VDC  Soft start  Operating temperature -40ºC to + 75ºC  Continuous short circuit protection  RoHS compliant Models Single output Maximum Input Voltage Output Voltage Output Current Efficiency Model Capacitive Load (V) (V) max (A) (%) (uF) AM30EW-2403SZ 9-36 3.3 7.5 20000 86 AM30EW-2405SZ 9-36 5 6 14000 88 AM30EW-2405.1SZ 9-36 5.1 6 14000 88 AM30EW-2412SZ 9-36 12 2.5 2000 89 AM30EW-2415SZ 9-36 15 2 2000 89 AM30EW-4803SZ 18-75 3.3 7.5 20000 86 AM30EW-4805SZ 18-75 5 6 14000 88 AM30EW-4805.1SZ 18-75 5.1 6 14000 88 AM30EW-4812SZ 18-75 12 2.5 2000 90 AM30EW-4815SZ 18-75 15 2 2000 91 Add suffix “-K” for optional heat sink Models Dual output Maximum Input Voltage Output Voltage Output Current Efficiency Model Capacitive Load (V) (V) max (A) (%) (uF) AM30EW-2405DZ 9-36 ±5 ±3 ±3000 88 AM30EW-2412DZ 9-36 ±12 ±1.25 ±1300 87 AM30EW-2415DZ 9-36 ±15 ±1 ±1300 87 AM30EW-4805DZ 18-75 ±5 ±3 ±3000 88 AM30EW-4812DZ 18-75 ±12 ±1.25 ±1300 88 AM30EW-4815DZ 18-75 ±15 ±1 ±1300 88 Add suffix “-K” for optional heat sink Models Triple output Output Maximum Input Output Output Current Efficiency Auxiliary Model Capacitive Voltage (V) Voltage (V) max (A) (%) Voltage (V) Load (uF) AM30EW-240312TZ 9-36 3.3 ±12 5 / ±0.42 15000 / ±220 88 AM30EW-240315TZ 9-36 3.3 ±15 5 / ±0.33 15000 / ±220 88 AM30EW-240512TZ 9-36 5 ±12 4 / ±0.42 8000 / ±220 90 AM30EW-240515TZ 9-36 5 ±15 4 / ±0.33 8000 / ±220 90 AM30EW-480312TZ 18-75 3.3 ±12 5 / ±0.42 15000 / ±220 88 AM30EW-480315TZ 18-75 3.3 ±15 5 / ±0.33 15000 / ±220 88 AM30EW-480512TZ 18-75 5 ±12 4 / ±0.42 8000 / ±220 90 AM30EW-480515TZ 18-75 5 ±15 4 / ±0.33 8000 / ±220 90 Add suffix “-K” for optional heat sink NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.K 1 of 7 North America only Series AM30EW-Z 30 Watt | DC-DC Converter Input Specifications Parameters Nominal Typical Maximum Units 24 9-36 Voltage range VDC 48 36-75 Filter π (Pi) Network Start up time 30 ms 24 -0.7 ~ 50 Absolute Maximum Rating VDC 48 -0.7 ~ 100 Peak Input Voltage time 100 ms ON: 3 ~12VDC or open circuit On/Off control OFF: 0 ~ 1.2VDC or Short circuit between pin 2 and pin 3 Vin 9~36 100 No Load Input Current mA Vin 36~75 50 24V ON/OFF 8.8 / 7.9 Under voltage lockout VDC 48V ON/OFF 17.8 / 16 Input reflected current 20 mAp-p Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 1600 VDC Case/Input tested voltage 3 sec 1600 VDC Resistance 1000 MOhm Capacitance 1500 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy (Single and Dual) ±1 % Voltage accuracy (Triple) Main / Auxiliary ±1 / ±5 25% load on one output - 100% load on ±5 % Cross Regulation (Dual Output Models) second load Main 100%, 25% load on Aux1 and 100% ±5 Cross Regulation (Triple) on Aux2 Over voltage protection Zener diode clamp Over current protection 120 % Short Circuit protection Continuous Short circuit restart Auto-Recovery o Thermal Shutdown Case temp 115 C Line voltage regulation (Single) HL-LL ±0.2 % Line voltage regulation (Dual) HL-LL ±0.2 % Line voltage regulation (Triple) HL-LL Main / Auxiliary ±1 / ±5 % Load voltage regulation (Single) 0-100% load ±0.5 % Load voltage regulation (Dual) Balanced load ±1 % Load voltage regulation (Triple) 10~100% Main / Auxiliary ±1 / ±5 % o Temperature coefficient ±0.02 %/ C 20MHz bandwidth, 3.3V/5V/5.1V/±5V 100 Ripple & Noise (Single and Dual) mV p-p 150 20MHz bandwidth, 12V/15V/±12V/±15V Ripple & Noise (Triple) 20MHz bandwidth Main / Auxiliary 50 / 75 mV p-p Voltage adjustment range (single) ±10 % Minimum Load Current 10 % of Max www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.K 2 of 7 North America only Series AM30EW-Z 30 Watt | DC-DC Converter General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz o Operating temperature Derating above 50 -40 to +75 C o Storage temperature -40 to +125 C o Maximum case temperature 105 C o Derating 2 %/ C Cooling Free Air Convection Humidity 95 % RH Case material Nickel coated Copper Weight 30 g Dimensions (L x W x H) 2.00 x 1.00 x 0.4 inches 50.80 x 25.40 x 10.17 mm Single & Dual: >450000 hrs (MIL-HDBK -217F, Ground Benign, t=+25ºC) MTBF Triple: >320000 hrs (MIL-HDBK -217F, Ground Benign, t=+25ºC) o Maximum soldering temperature 1.5mm from case for 10 sec 260 C Transient recovery time 250 uS Transient recovery deviation ±3 % Safety Specifications Parameters Agency Approval CE EN55022 Class A, EN55024 IEC61000-4-2, Perf. Criteria B IEC61000-4-3, Perf. Criteria A Standards IEC61000-4-4, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-5, Perf. Criteria B (external 220uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A Pin Out Specifications Single Dual Triple Pin 1 + V Input + V Input + V Input 2 - V Input - V Input - V Input 3 On/Off Control On/Off Control On/Off Control 4 + V Output + V Output + Vaux Output 5 -V Output Common - Vaux Output 6 Trim - V Output Common 7 No Pin No Pin + V Output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.K 3 of 7 North America only Series AM30EW-Z 30 Watt | DC-DC Converter Dimensions Single and Dual Output Models 50.80 (2.00) 4 1 2 Bottom View 5 3 6 2.54 2.54 (0.10) (0.10) Notes: All dimensions are typical in millimeters (inches). Pin Pitch Tolerance ±0.35 (±0.014) Diameter 1.00 Case Tolerance ±0.50 (±0.02) (0.04) Triple Output Models 50.80 (2.00) 4 1 5 2 Bottom View 6 3 7 2.54 2.54 (0.10) (0.10) Notes: All dimensions are typical in millimeters (inches). Pin Pitch Tolerance ±0.35 (±0.014) Case Tolerance ±0.50 (±0.02) Dimensions with Optional Heat Sink 50.8 25.4 (2.0) (1.0) 16.3 (0.64) SIDE END Notes: Add “-K” suffix for ordering, heat sink is affixed with thermally dissipative adhesive tape. See derating graph for temperature performance. Heat sink material is anodized (black) aluminum, adds weight 11.2g to total mass (41.2g). Thermal impedance of converter is: with heat sink 10Ԩ/W and 12Ԩ/W without heat sink www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.K 4 of 7 North America only 25.40 25.40 10.16 10.16 (0.40) (1.00) (0.40) (1.00) 5.08 5.08 (0.20) (0.20) 10.16 10.16 (0.40) (0.40) 5.08 5.08 (0.20) (0.20) 5.08 5.08 (0.20) (0.20) 2.54 (0.10) 2.54 (0.10) 5.08 (0.20) 10.16 10.16 7.64 (0.40) (0.40) (0.30) 7.64 (0.30) Series AM30EW-Z 30 Watt | DC-DC Converter Derating Free Air Convection 50 ºC 100 60 ºC Heatsink 80 60 Safe Operating Area 40 20 0 75 50 0 40 80 100 -40 -25 20 60 º C Ambient Temperature Extended temperature performance can be achieved with optional heat sink. (add suffix “–K” to part number) Trimming On/Off Control Positive logic turns on the module during high logic and off during low logic. Module can be controlled by an external switch between the On/Off CTRL terminal and –Vinput terminal. The switch can be either open collector or open drain. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.K 5 of 7 North America only Output Power % Series AM30EW-Z 30 Watt | DC-DC Converter Recommended Circuits C1 L C2 100uF, 100V 12uH 1206, 470pF, 2KV Conducted/Radiated Emissions Single Output +V output L +V input C1 DC/DC Converter Load -V input -V output C2 Conducted/Radiated Emissions Dual Output +V output L +V input C1 DC/DC Load Converter Load -V output -V input Common C2 Conducted/Radiated Emissions Triple Output Load +Vaux L Output +V input -Vaux Load C1 DC/DC Output Converter Load +V output -V input Common C2 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.K 6 of 7 North America only Series AM30EW-Z 30 Watt | DC-DC Converter Surge/EFT C1 220uF, 100V NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. specific safety and regulatory standards other the ones listed in this datasheet. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R11.K 7 of 7 North America only