Click on Series name for product info on aimtec.com Series AME15-MAZ 15 Watt | AC-DC / DC-DC Converter FEATURES: • 4000VAC I/O Isolation • RoHS compliant • Operating temperature: -40 to +85°C • Soft start • Over load, Over Voltage, Short Circuit Protection • Energy Star compliant • Universal input: 90-264VAC, 47-440Hz • CE, cULus, CB approvals Models CB Single output Efficiency Input Voltage Input voltage Output Output Current Maximum (%) Model (VAC/Hz) (VDC) Voltage (V) max (A) capacitive Load (µF) 115 230 VAC VAC AME15-3.3SMAZ 90-264/47-440 130-370 3.3 3 4700 73 73 AME15-5SMAZ 90-264/47-440 130-370 5 3 2200 76 78 AME15-12SMAZ 90-264/47-440 130-370 12 1.25 1000 78 79 AME15-15SMAZ 90-264/47-440 130-370 15 1 680 79 82 AME15-24SMAZ 90-264/47-440 130-370 24 0.63 470 82 84 Models Dual output Efficiency Input Voltage Input voltage Output Output Current Maximum (%) Model (VAC/Hz) (VDC) Voltage (V) max (A) Capacitive Load (µF) 115 230 VAC VAC AME15-5DMAZ 90-264/47-440 130-370 ±5 ±1.5 ±1000 78 79 AME15-12DMAZ 90-264/47-440 130-370 ±12 ±0.63 ±470 81 82 AME15-15DMAZ 90-264/47-440 130-370 ±15 ±0.5 ±330 82 83 Input Specifications Parameters Conditions Typical Maximum Units 115 VAC 350 mA Current 230 VAC 180 mA 115 VAC 20 A Inrush current <2ms (Cold Start) 230 VAC 30 A 115 VAC 0.1 mA Leakage current 264 VAC 0.2 mA External Fuse (recommend) slow blow type 2 A Input Dissipation 110/230Vac ≤ 0.4 W Under Voltage Protection 85 VAC Start-up time 1300 ms Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±2 % Line regulation LL-HL ±1 % Load regulation (single) 0-100% ±1 % st nd Cross regulation (dual)** 25% load - 1 out, 100% load – 2 out ±5 % Transient Recovery Time 300 µs Transient Response Deviation 25% load step ±2 % of Vout 3.3 / 5V Models 75 Ripple & Noise* 12 / 15V Models 100 mVp-p 24V 150 Hold-up time min 20 ms * Ripple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) and 47μF (E/C) parallel capacitor ** The load of each output should be limited to the maximum rated current of each output. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.Q 1 of 4 North America only Series AME15-MAZ 15 Watt | AC-DC / DC-DC Converter Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 4000 VAC MΩ Isolation resistance >1000 General Specifications Parameters Conditions Typical Maximum Units Switching frequency 132 KHz Protection class Class II Over load protection Fold Back 130 % Over voltage protection Zener diode clamp Short Circuit protection Continuous Short Circuit restart Auto recovery o o Operating temperature With derating over 55 C -40 to +85 C o Storage temperature -40 to +100 C o Max Case temperature 100 C o Temperature coefficient ±0.02 % / C Cooling Free air convection Humidity 95 % RH Weight 100 g Dimensions (L x W x H) 2.56 x 1.83 x 0.79 inches 65.0 x 46. 5 x 20.1 mm , ±0.5mm o > 400,000hrs (MIL-HDBK -217F, t=+25 C) MTBF > 100,000hrs (MIL-HDBK -217F, t=at highest operating temperature) Case material Plastic (flammability to UL 94V-0) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Environment Approval Parameters Conditions Wave form: Half sine wave Acceleration amplitude: 5gn Shock Bump duration: 30 ms Number of bumps: 18 (3 in each direction for every axis) Converter operation before and after test, body mounted (on chassis) Test mode: Sweep sine 10-100Hz, speed 0.05Hz/s Displacement: 1mm Vibrations Acceleration: 3g 3 loops 30min one cycle, 3h total, every axis tested Converter operation before and after test, body mounted (on chassis) Safety & EMC Specifications Parameters Agency approvals cULus, CE, CB IEC\EN\UL 60601-1, 2 x MOOP,CSA-C22.2 No. Medical Electrical Equipment 601.1-M90 Information technology Equipment EN 60950-1:2006+A11:2009 EMI - Conducted and radiated emission EN55011, class B Harmonic Current Emissions IEC/EN 61000-3-2, Class A Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 Standards RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient/Burst Immunity IEC 61000-4-4 Level 3 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 2 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.Q 2 of 4 North America only Series AME15-MAZ 15 Watt | AC-DC / DC-DC Converter Pin Out Specifications Pin Single Dual 1 No pin No pin 2 AC Input (N) AC Input (N) 3 AC Input (L) AC Input (L) 4 -V Output -V Output 5 No pin Common 6 +V Output +V Output Dimensions (Top View) 2.56 (65.00) 0.23 2.13 (5.75) (54.00) 0.52 1 (13.24) 1 0.69 4 (17.50) 0.39 TOP VIEW 4 (10.00) 1.83 2 TOP VIEW 5 (46.50) 0.39 2 0.69 (10.00) 5 (17.50) 6 0.52 6 3 (13.24) 3 0.18 0.26 (4.50) 0.23 (6.50) (5.75) DIV: 0.4 (11.6) 6 Ø- 0.047 (Ø 1.2) Dimensions: inch (mm) 0.79 Case Tolerance:± 0.02 (0.50) (20.10) Pin Pitch Tolerance: ± 0.02 (0.50) Ø 0.04 - Case temperature Measurement (1.00) Point 0.2 (5.08) (Min) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.Q 3 of 4 North America only Series AME15-MAZ 15 Watt | AC-DC / DC-DC Converter Derating Free Air Convection 55 º C 100 80 Safe Operating Area 60 50% 70 40 25% 85 20 0 85 -20 100 -40 0 20 40 60 80 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.Q 4 of 4 North America only