Click on Series name for product info on aimtec.com Series AME30-MAZ 30 Watt | AC-DC / DC-DC Converter FEATURES:  4000VAC I/O isolation  Energy star compliant  Medical Switching power modules for PCB mounting  RoHS compliant  Operating temperature: -40 to +85°C  Low Ripple and Noise  Universal Input: 90-264VAC, 47-440Hz, or 130-370VDC  CE, cULus, BC approvals Models CB Single output Efficiency Output Maximum Output Current Input Voltage Input Voltage (%) Model Voltage Capacitive max (VAC/Hz) (VDC) 115 230 (V) load (µF) (A) VAC VAC AME30-3.3SMAZ 90-264/47-440 130-370 3.3 8200 6 79 77 AME30-5SMAZ 90-264/47-440 130-370 5 8200 6 82 81 AME30-12SMAZ 90-264/47-440 130-370 12 2200 2.5 84 82 AME30-15SMAZ 90-264/47-440 130-370 15 1500 2 84 82 AME30-24SMAZ 90-264/47-440 130-370 24 560 1.25 83 82 Models Dual output Efficiency Output Maximum Output Current (%) Input Voltage Input Voltage Model Voltage Capacitive max (VAC/Hz) (VDC) 115 230 (V) load (µF) (A) VAC VAC AME30-5DMAZ 90-264/47-440 130-370 ±5 3300 ±3 80 80 AME30-12DMAZ 90-264/47-440 130-370 ±12 2200 ±1.25 82 82 AME30-15DMAZ 90-264/47-440 130-370 ±15 1000 ±1 82 81 AME30-24DMAZ 90-260/47-440 130-370 ±24 470 ±0.625 77 76 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Conditions Typical Maximum Units 115 VAC mA  740 Current 230 VAC 410 mA  115 VAC 25 A  Inrush current <2ms 230 VAC  50 A Leakage current µA  150 External fuse Recommended slow blow type 3.15 A Input dissipation 115 / 230 VAC ൑ 0.5 W Start-up time 250 ms Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±2 % Line regulation (LL-HL) ±1 % 0-100% load single ±1 Load regulation % 0-100% load dual ±2 st nd Cross regulation 25% load - 1 out, 100% load – 2 out ±5 % Transient response deviation 25% load Step ±2 % of Vout 3.3 / 5V models 75 Ripple & Noise* 12 / 15V models 100 mV p-p 24V models 150 Hold-up time (min) 25 ms Minimum Load Current 0 % of Max *Ripple & Noise measured at 20MHz bandwidth by using with 0.1μF M/C and47μF E/C www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.N 1 of 4 North America only Series AME30-MAZ 30 Watt | AC-DC / DC-DC Converter Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 4000 VAC Isolation Resistance >1000 MΩ General Specifications Parameters Conditions Typical Maximum Units Switching frequency 47 KHz Protection class Class II Over current protection Fold back 130 % Over voltage protection Zener diode clamp 110 % Short circuit protection Auto recovery Short Circuit restart Auto recovery o Operating temperature With derating above 55ºC -40 to +85 C o Maximum case temperature 100 C o Storage temperature -40 to +95 C o Temperature coefficient 0.02 % / C Cooling Free air convection Humidity Non condensing 95 % RH Case material Plastic (flammability to UL 94V-0) Weight 300 g Dimensions (L X W X H) 3.56 x 2.48 x 1.18 inches 90.5 x 63 x 30 mm > 800,000 hrs (MIL-HDBK -217F, t=+25 oC)/Full Load MTBF > 200,000 hrs (MIL-HDBK -217F, t=at highest operating temperature)/Full Load Environment Approval Test Parameters Conditions Wave form Half sine wave Acceleration amplitude 5gn Shock Bump duration 30 ms Converter operation Before and after test, body mounted (on chassis) Number of bumps 18 (3 in each direction for every axis) Test mode Sweep sine, 10-100Hz, speed 0.05Hz/s Displacement 1 mm Vibration Acceleration 3g, 3 loops 30min one cycle, 3h total, every axis tested Converter operation Before and after test, body mounted (on chassis) Safety Specifications Parameters Agency approvals cULus, CE, CB IEC\EN\UL 60601-1, 2 x MOOP, CSA-C22.2 No. 601.1- Medical Electrical Equipment M90 Information technology Equipment EN 60950-1:2006+A11:2009 EMI - Conducted and radiated emission EN55011, class B Harmonic Current Emissions IEC/EN 61000-3-2, Class A Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 Standards RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient/Burst Immunity IEC 61000-4-4 Level 3 Surge Immunity IEC 61000-4-5 Level 2 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 2 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.N 2 of 4 North America only Series AME30-MAZ 30 Watt | AC-DC / DC-DC Converter Pin Out Specifications Pin Single Dual 1 AC Input (L) AC Input (L) 2 AC Input (N) AC Input (N) 3 +V Output +V Output 4 -V Output Common 5 No pin -V Output Dimensions Derating www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.N 3 of 4 North America only Series AME30-MAZ 30 Watt | AC-DC / DC-DC Converter Earth/Ground Connection EMC EN55022 class B compliant Application circuit L1 35mH ASE2501V‐G +Vout L       CX1       CX2 90-264VAC         0.6uF         0.6uF AMExw30‐MAZ N -Vout                           The Application circuit is EMC compliant for any type of Earth/Ground connection: Input Ground connection, Output Ground connection as shown or both sides, which is not recommended if the product Isolation is used as a Safety feature. NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.N 4 of 4 North America only