Click on Series name for product info on aimtec.com Series AMEC15-MAZ 15 Watt | AC-DC / DC-DC Converter FEATURES:  Connector on Input & Output  RoHS compliant  Operating temperature: -40 to +80°C  Soft start  Over load, Over Voltage, Short Circuit Protection  Energy Star compliant  Optional DIN Rail mounting bracket  CE, cULus, CB approvals  Universal input: 90-264VAC, 47-440Hz  4000VAC I/O Isolation Models CB  Single output Efficiency Output Output Maximum Input Voltage Input voltage (%) Model Voltage Current Capacitive Load (VAC/Hz) (VDC) 115 230 (V) max (A) (µF) VAC VAC AMEC15-3.3SMAZ 90-264/47-440 130-370 3.3 3 4700 74 74 AMEC15-5SMAZ 90-264/47-440 130-370 5 3 2200 75 76 AMEC15-12SMAZ 90-264/47-440 130-370 12 1.25 1000 81 82 AMEC15-15SMAZ 90-264/47-440 130-370 15 1 680 81 83 AMEC15-24SMAZ 90-264/47-440 130-370 24 0.63 470 83 83 Models Dual output Efficiency Output Output Maximum Input Voltage Input voltage (%) Model Voltage Current Capacitive Load (VAC/Hz) (VDC) 115 230 (V) max (A) (µF) VAC VAC AMEC15-5DMAZ 90-264/47-440 130-370 ±5 ±1.5 ±1000 78 79 AMEC15-12DMAZ 90-264/47-440 130-370 ±12 ±0.63 ±470 81 82 AMEC15-15DMAZ 90-264/47-440 130-370 ±15 ±0.5 ±330 82 83 Input Specifications Parameters Conditions Typical Maximum Units 115VAC 350 mA Current (Full Load) 230VAC 180 mA 115 VAC 20 A Inrush current <2ms 230 VAC 30 A 115 VAC 0.1 mA Leakage current 264 VAC 0.2 mA External Fuse recommend slow blow type 2 A Input Dissipation 115 / 230 VAC ൑0.2 W Under Voltage Protection 85 VAC Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±2 % Line regulation LL-HL ±1 % Load regulation (single output) 0-100% ±1 % st nd Cross regulation (dual output) ** 25% load - 1 out, 100% load – 2 out ±5 % Transient Recovery Time 200 µs Transient Recovery Deviation 25% load step ±2 % of Vout 3.3/5V models 75 Ripple & Noise* 12/15V models 100 mVp-p 24V models 150 Hold-up time min 20 ms *Ripple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) and 47μF (E/C) parallel capacitor. ** The load of each output should be limited to the maximum rated current of each output. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.W 1 of 5 North America only Series AMEC15-MAZ 15 Watt | AC-DC / DC-DC Converter Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 4000 VAC Isolation resistance >1000 MΩ General Specifications Parameters Conditions Typical Maximum Units Switching frequency 132 KHz Protection Class Class II Startup time 350 mS Over load protection Foldback 130 % Over voltage protection Zener diode clamp Short Circuit protection Auto recovery Case Material Metal o o Operating temperature With derating over 55 C (10CFM) -40 to +80 C o Storage temperature -50 to +100 C o Max Case temperature 100 C o Temperature coefficient ±0.02 % / C Cooling Free air convection Humidity 95 % RH Weight 100 g Dimensions (L x W x H) 3.62 x 2.56 x 0.94 inches 92.0 x 65.0 x 24.0 mm o MTBF > 400 000hrs (MIL-HDBK -217F, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Environment Approval Parameters Conditions Wave form: Half sine wave Acceleration amplitude: 5gn Shock Bump duration: 30 ms Number of bumps: 18 (3 in each direction for every axis) Converter operation before and after test, body mounted (on chassis) Test mode: Sweep sine 10-100Hz, speed 0.05Hz/s Displacement: 1mm Vibrations Acceleration: 3g 3 loops 30min one cycle, 3h total, every axis tested Converter operation before and after test, body mounted (on chassis) Safety & EMC Specifications Parameters Agency approvals cULus, CE, CB Medical Electrical Equipment IEC\EN\UL 60601-1, 2 x MOOP, CSA-C22.2 No. 601.1-M90 Information technology Equipment EN 60950-1:2006+A11:2009 Harmonic Current Emissions IEC/EN 61000-3-2, Class A EMI - Conducted and radiated emission EN55011, class B Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 Standards RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient/Burst Immunity IEC 61000-4-4 Level 3 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 2 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.W 2 of 5 North America only Series AMEC15-MAZ 15 Watt | AC-DC / DC-DC Converter Derating A A B Free Air 100 Convection 40 º C 80 B 60 10 CFM 55 º C Safe Operating Area 40 20 0 85 - - 0 20 40 60 80 100 40 20 Ambient Temperature º C Pin Out Specifications Pin Single Dual 1 AC Input (N) AC Input (N) 2 AC Input (L) AC Input (L) 3 -V Output -V Output 4 No Connection Common 5 +V Output +V Output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.W 3 of 5 North America only Output Power (%) Series AMEC15-MAZ 15 Watt | AC-DC / DC-DC Converter Dimensions PCB Mounting PCB Mounting Screw Screw PCB Side View Mylar Film Bracket Mountin g Screw PCB Mylar Film 2.6 mm Max Customer Chassis www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.W 4 of 5 North America only 24 (0.94) Series AMEC15-MAZ 15 Watt | AC-DC / DC-DC Converter Mating Connectors with Wire (included) DC Output Mating Connector 200 ± 0.5 Top 3 ± 0.5 Vie w Side View AC Input Mating Connector Alternative Connector Side 200 ± 0.5 View Top View 3 ± 0.5 Side View Alternative Connector Side View Optional DIN Rail Bracket 35 48 15 48 To order optional DIN rail bracket kit specify part number DRB01 when Optional DIN placing order Rail Bracket compatible with DIN Rail TS35/7.5 NOTE: 1.Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.W 5 of 5 North America only 2.5 MAX 30 8.8