Click on Series name for product info on aimtec.com Series AMEL1-AZ 1Watt | AC-DC Converter FEATURES:  I/O Isolation 3000VAC  RoHS compliant o o  Operating Temp: -40 C to +80 C  Energy Star compliant  Input: 90-305VAC, 47-440Hz, or 130-430 VDC  Ultra small package  Optional 90-528VAC, 47-440Hz, or 130-745 VDC Models  Over Load,Short Circuit Protection Single output Maximum Efficiency Input Input Temperature Output Output capacitive (%) Model Voltage Voltage range Voltage Current max Load 115 230 277 480 (VAC/Hz) (VDC) (ºC) (V) (mA) VAC VAC VAC VAC (µF) AMEL1-3.3SAZ 90-305/47-440 130-430 -40 to +80 3.3 300 2200 70 66 63 AMEL1-5SAZ 90-305/47-440 130-430 -40 to +80 5 200 1100 68 64 61 AMEL1-12SAZ 90-305/47-440 130-430 -40 to +80 12 83 680 70 66 64 AMEL1-15SAZ 90-305/47-440 130-430 -40 to +80 15 67 560 75 71 68 AMEL1-24SAZ 90-305/47-440 130-430 -40 to +80 24 42 470 78 75 72 AMEL1-3.3SBAZ 90-528/47-440 130-745 -40 to +80 3.3 300 2200 61 60 58 55 AMEL1-5SBAZ 90-528/47-440 130-745 -40 to +80 5 200 1100 68 68 66 59 AMEL1-12SBAZ 90-528/47-440 130-745 -40 to +80 12 83 680 70 68 66 57 AMEL1-15SBAZ 90-528/47-440 130-745 -40 to +80 15 67 560 75 76 74 64 AMEL1-24SBAZ 90-528/47-440 130-745 -40 to +80 24 42 470 57 57 56 49 Models Dual output Maximum Efficiency Input Input Temperature Output Output capacitive (%) Model Voltage Voltage range Voltage Current max Load 115 230 277 480 (VAC/Hz) (VDC) (ºC) (V) (mA) VAC VAC VAC VAC (µF) AMEL1-5DAZ 90-305/47-440 130-430 -40 to +80 ±5 100 1100 66 67 66 AMEL1-12DAZ 90-305/47-440 130-430 -40 to +80 ±12 41 680 68 67 66 AMEL1-15DAZ 90-305/47-440 130-430 -40 to +80 ±15 33 330 64 63 62 AMEL1-5DBAZ 90-528/47-440 130-745 -40 to +80 ±5 100 1100 65 66 65 57 AMEL1-12DBAZ 90-528/47-440 130-745 -40 to +80 ±12 41 680 67 66 65 57 AMEL1-15DBAZ 90-528/47-440 130-745 -40 to +80 ±15 33 330 63 62 61 54 Models Dual Asymmetrical output Maximum Efficiency Input Input Temperature Output Output capacitive (%) Model Voltage Voltage range Voltage Current max Load 115 230 277 480 (VAC/Hz) (VDC) (ºC) (V) (mA) VAC VAC VAC VAC (µF) AMEL1-512DAZ 90-305/47-440 130-430 -40 to +80 5/12 65/35 1100 59 59 59 AMEL1-512DBAZ 90-528/47-440 130-745 -40 to +80 5/12 65/35 1100 58 58 58 50 Input Specifications Parameters Conditions Typical Maximum Units 115 VAC  25 mA 230 VAC 20 mA  Current (full load) 277VAC  15 mA 480VAC 10 mA  115 VAC  10 A 230 VAC 15 A  Inrush current <2ms (cold start) 277 VAC 20 A  480 VAC 30 A  Leakage current 0.15 mA  External fuse Recommended slow blow type 1 A Input Dissipation (No Load) ≦0.5 W www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.F 1 of 4 North America only Series AMEL1-AZ 1Watt | AC-DC Converter Single Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy Full load (typical)* ±5 % Line regulation LL-HL, Full Load ±5 % Load regulation (single output) 0-100% load (typical)* ±5 % Transient Recovery Time 200 µs Transient Response Deviation 25% load step ±2 % of Vout Minimum load 0 % 3.3V&5V with 680 μF (E/C) + 0.1μF M/C 300 mV p-p 300 mV p-p 12V&15V with 220 uF (E/C) + 0.1μF M/C Ripple & Noise 200 mV p-p 24V with 470 uF (E/C) + 0.1μF M/C * Ripple & Noise measured at 20MHz bandwidth with115/230/277/480VAC (typical input) with Full Load. Dual Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy Full load ±5 % Line regulation LL-HL ±5 % Load regulation 0-100% load ±5 % Cross regulation 25% load change ±5 % Transient Recovery Time 200 µs Transient Response Deviation 25% load step ±2 % of Vout Minimum load 0 % 5D/12D/15D with 220uF (E/C) + 0.1μF M/C 200 mV p-p Ripple & Noise 512D with 220uF (E/C) + 0.1μF M/C 300 mV p-p *Ripple &Noisemeasuredat20MHz bandwidth and 115/230/277/480VAC (typical input) with Full Load. *5D/12D/15D Model with symmetric load change and 512D Model with asymmetric load change. Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60sec 3000 VAC Isolation Resistance >1000 MΩ General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100 KHz Over Load protection Folder back >125% Short circuit protection Auto recovery o Operating temperature Without Derating -40 to +80 C o Storage temperature -40 to +85 C o Maximum Case temperature 100 C Humidity Non condensing 20~95 % RH Case material Plastic resin + Fiberglass (flammability to UL 94V-0) Weight 21 g 90-305VAC 1.10 x 0.90 x 0.57 inches (28.00 x 23.00 x 14.50 mm) Dimensions (L x W x H) 90-528VAC 1.10 x 0.90 x 0.67 inches (28.00 x 23.00 x 17.00 mm) o MTBF >400 000 hrs (MIL-HDBK -217F, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.F 2 of 4 North America only Series AMEL1-AZ 1Watt | AC-DC Converter Environment Approval Parameters Conditions Wave form: Half sine wave Acceleration amplitude: 5gn Shock Bump duration: 30 ms Number of bumps: 18 (3 in each direction for every axis) Converter operation before and after test, body mounted (on chassis) Test mode: Sweep sine 10-100Hz, speed 0.05Hz/s Displacement: 1mm Vibrations Acceleration: 3g 3 loops 30min one cycle, 3h total, every axis tested Converter operation before and after test, body mounted (on chassis) Safety Specifications Parameters Agency approvals cULus, CE, CB (certifications pending) Information technology Equipment IEC/EN/UL 60950-1:2006+A11:2009 EMI - Conducted and radiated emission EN55022, class B Harmonic Current Emissions IEC/EN 61000-3-2, (EN60555-2) Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 RF, Electromagnetic Field Immunity IEC 61000-4-3 Electrical Fast Transient/Burst Immunity IEC 61000-4-4 Surge Immunity (1KV) IEC 61000-4-5(SAZ &DAZ:Level2,SBAZ&DBAZ:Level 1) RF, Conducted Disturbance Immunity IEC 61000-4-6 Power frequency Magnetic Field Immunity IEC 61000-4-8 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 Canadian Safety Agency CAN/CSA-C22.2 NO. 60950-1-07 Pin Out Specifications Pin Single Dual 1 NC NC 2 NC NC 3 +V Output +V Output 4 GND GND 5 No Pin -V Output 6 AC Input (L) AC Input (L) 7 AC Input (N) AC Input (N) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.F 3 of 4 North America only Series AMEL1-AZ 1Watt | AC-DC Converter Dimensions 28.00 (1.10) 3.175 3.175 (0.125) (0.125) Top View 1 3 4 5 1 3 4 5 Tem perature m easuring point 15.875 23.00 Top V iew (0.625) (0.90) 2 6 7 2 67 15.875 6.35 (0.625) (0.25) D IV : 5.00 (0.20) 1£X 10.0 ( £X 0.40) 14.50 AM EL-S/DAZ 7£X 0.80 ( £X 0.03) (0.57) Side V iew 3.18 D im ensions m m (inch) Case Tolerance ¡ Ó 0.50 (¡ Ó 0.02) (0.13) P in D iam eter 0.80¡ Ó 0.05 (0.03¡ Ó 0.002) P in P itch Tolerance ¡ Ó 0.50 (¡ 0. Ó 02) 0.80 (0.03) 17.00 AMEL-SB/DBAZ (0.69) S ide V iew 3.18 (0.13) 0.80 (0.03) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.F 4 of 4 North America only