Click on Series name for product info on aimtec.com Series AMEL10-MAZ 10 Watt | AC-DC / DC-DC Converter FEATURES: • I/O Isolation 4000VAC • Energy Star compliant o o • Operating Temp: -40 C to +70 C • Ultra-small package • Over load, Over Voltage, Short Circuit Protection • Up to 79% efficiency • Universal Input: 90-264VAC, 47-440Hz, or 130-370VDC Models CB Single output Maximum Input Max Output Output Output Input Voltage capacitive Efficiency Model Voltage Voltage Current max wattage (VAC/Hz) load (%) (VDC) (W) (V) (A) (µF) AMEL10-3.3SMAZ 90-264/47-440 130-370 9.9 3.3 3.00 2200 73 AMEL10-5SMAZ 90-264/47-440 130-370 10 5 2.00 1000 75 AMEL10-12SMAZ 90-264/47-440 130-370 10 12 0.84 680 78 AMEL10-15SMAZ 90-264/47-440 130-370 10 15 0.67 470 79 AMEL10-24SMAZ 90-264/47-440 130-370 10 24 0.42 470 79 Models Asymmetric Dual output Maximum Input Output Rated Max Output Input Voltage capacitive Efficiency Model Voltage wattage Voltage Output (VAC/Hz) load (%) (VDC) (W) (V) Current (A) (µF) AMEL10-3.35DMAZ 90-264/47-440 130-370 7.9 3.3/5 0.9/1.0 680 74 AMEL10-3.312DMAZ 90-264/47-440 130-370 8 3.3/12 0.9/0.41 680 77 AMEL10-3.315DMAZ 90-264/47-440 130-370 8 3.3/15 0.9/0.33 680 76 AMEL10-3.324DMAZ 90-264/47-440 130-370 8 3.3/24 0.9/0.2 680 72 AMEL10-512DMAZ 90-264/47-440 130-370 8 5/12 0.6/0.41 470 75 AMEL10-515DMAZ 90-264/47-440 130-370 8 5/15 0.6/0.33 470 77 AMEL10-524DMAZ 90-264/47-440 130-370 8 5/24 0.6/0.2 470 72 AMEL10-1215DMAZ 90-264/47-440 130-370 8 12/15 0.25/0.33 330 76 AMEL10-1224DMAZ 90-264/47-440 130-370 9 12/24 0.25/0.25 330 73 AMEL10-1524DMAZ 90-264/47-440 130-370 9 15/24 0.2/0.25 330 73 AMEL10-3.3N5DMAZ 90-264/47-440 130-370 7.3 -3.3/5 -0.7/1.0 680 74 AMEL10-3.3N12DMAZ 90-264/47-440 130-370 8 -3.3/12 -0.9/0.41 680 75 AMEL10-3.3N15DMAZ 90-264/47-440 130-370 8 -3.3/15 -0.9/0.33 680 75 AMEL10-5N5DMAZ 90-264/47-440 130-370 8 -5/5 -0.6/1 680 74 AMEL10-5N12DMAZ 90-264/47-440 130-370 8 -5/12 -0.6/0.41 470 74 AMEL10-5N15DMAZ 90-264/47-440 130-370 8 -5/15 -0.6/0.33 470 74 AMEL10-12N12DMAZ 90-264/47-440 130-370 8 -12/12 -0.25/0.41 470 72 AMEL10-12N15DMAZ 90-264/47-440 130-370 8 -12/15 -0.25/0.33 330 75 Note: Optional mounting plate version can be ordered by adding “-ST” suffix to part number (ex. AMEL10-5SMAZ-ST) *Output power must not exceed the listed values. All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Conditions Typical Maximum Units 115VAC 0.23 A Current 230VAC 0.15 A 115VAC  10 A Inrush current <2ms (cold start) 230VAC 20 A  Leakage current 0.25 mA  External fuse slow blow type 1 A www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.C 1 of 6 North America only Series AMEL10-MAZ 10 Watt | AC-DC / DC-DC Converter Input Specifications (continued) Parameters Conditions Typical Maximum Units Input dissipation No Load ≤0.5 W Start up time 50 ms Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±2 % Line regulation ±1 % Load regulation (single output) 0-100% load ±2 % Load regulation (dual output) Unbalanced (0-100% load) ±3 % Transient recovery time 500 µs Transient response deviation 25% load step ±2 % of Vout 3.3 & 5V models 75 Ripple & Noise* mV p-p 12, 15 & 24V models 100 115VAC 10 Hold-up time (min) ms 230VAC 25 *Ripple and Noise are measured at 20MHz bandwidth & 230VAC by using a 0.1µF (M/C) & 4.7µF (E/C) parallel capacitor. Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec, <5mA 4000 VAC Isolation resistance >1000 MΩ Isolation capacitor 2200 pF General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 65 KHz Protection class Class II Over load protection Auto recovery, Foldback 150 % Over voltage protection Zener Diode Clamp Short circuit protection Continuous Short circuit restart Auto recovery o Operating temperature See derating table -40 to +70 C o Maximum case temperature 100 C o Storage temperature -45 to +95 C o Temperature coefficient ±0.02 % / C Cooling Free air convection Humidity Non condensing 20 ~ 95 % RH Case material Plastic resin + Fiberglass (flammability to UL 94V-0) Weight 70 g Dimensions (L x W x H) 2.22 x 1.21 x 0.99 inches 56.48 x 30.86 x 25.10mm o > 400 000 hrs (MIL-HDBK -217F, t=+25 C)/Full Load MTBF > 100,000 hrs (MIL-HDBK -217F, t=at highest operating temperature)/Full Load Environment Approval Test Parameters Conditions Wave form Half sine wave Acceleration amplitude 5gn Shock Bump duration 30 ms Converter operation before and after test, body mounted (on chassis) Number of bumps 18 (3 in each direction for every axis) Test mode Sweep sine Displacement 1mm Vibration Acceleration 3g Converter operation 10-100Hz, speed 0.05Hz/s www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.C 2 of 6 North America only Series AMEL10-MAZ 10 Watt | AC-DC / DC-DC Converter Safety Specifications Parameters Agency approvals cULus, CE, CB IEC\EN\UL 60601-1, 2 x MOOP, CSA-C22.2 No. Medical Electrical Equipment 601.1-M90 Information technology Equipment EN 60950-1:2006+A11:2009 EMI - Conducted and radiated emission EN55022, class B Harmonic Current Emissions IEC/EN 61000-3-2, Class A Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2, Contact ±4KV/Air ±8KV, Criteria A Standards RF, Electromagnetic Field Immunity IEC 61000-4-3, 3V/m, Criteria A Electrical Fast Transient/Burst Immunity IEC 61000-4-4, ±1KV, Criteria A Surge Immunity IEC 61000-4-5, ±2KV, Criteria A RF, Conducted Disturbance Immunity IEC 61000-4-6, 3Vrms, Criteria A Power frequency Magnetic Field Immunity IEC 61000-4-2, Contact ±4KV/Air ±8KV, Criteria A Voltage dips, Short Interruptions Immunity IEC 61000-4-11 Information Technology Equipment UL 60950-1:2007 Information Technology Equipment CAN/CSA-C22.2 No.60950-1-07 Additional Surge Protective Circuitry The AMEL10-MAZ series design level surge protection is certified to IEC 61000-4-5 surge Line to Line of 1KV. However greater protection can be enhanced by adding protective devices to ingress circuitry. For example, by adding an MOV (Metal Oxide Varistor) device example TVR10471KSY to the N / L input lines 2KV surge protection or greater, can be achieved. L Fuse + Vo+ Aimtec MOV AC-DC Converter N - Vo- Vrms Vdc Wmax (2ms) Pmax MOV PN V V J W TVR10471KSY 300 385 70 0.4 Pin Out Specifications Pin Single Dual positive Dual negative/positive 1 AC Input (L) AC Input (L) AC Input (L) 2 AC Input (N) AC Input (N) AC Input (N) 3 +V Output +V1 Output +V1 Output 4 -V Output Common Common 5 No pin +V2 Output -V2 Output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.C 3 of 6 North America only Load Series AMEL10-MAZ 10 Watt | AC-DC / DC-DC Converter Dimensions 56.46 (2.22) 45.72 (1.80) 3 1 3 4 1 Top View 4 Top View 2 5 2 5 5.37 5.37 The hottest area (0.21) (0.21) DIV: 10.00 (0.40) 5Ø 1.0 (Ø 0.04) Dimensions mm (inch) Case Tolerance ±0.50 (±0.02) 1.05 Pin Diameter 1.0 ± 0.05 (0.04 ± 0.002) (0.04) Pin Pitch Tolerance ±0.35 (±0.014) Derating Free Air Convection 50°C 100 80 60 Safe Operating Area 40 20 70°C 0 80 100 - 40 - 20 0 20 40 60 º C Ambient Temperature www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.C 4 of 6 North America only 30.86 (1.21) 25.10 5,27 20.32 5.27 (0.99) (0.80) (0.21) (0.21) Output Power (%) 8.00 (0.31) 10.20 10.20 (0.40) (0.40) Series AMEL10-MAZ 10 Watt | AC-DC / DC-DC Converter Derating (Dual Output Models) Free Air Convection 40°C 100 80 60 Safe Operating Area 40 20 70°C 0 80 100 - 40 - 20 0 20 40 60 º C Ambient Temperature www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.C 5 of 6 North America only Output Power (%) Series AMEL10-MAZ 10 Watt | AC-DC / DC-DC Converter Dimensions of Optional ST Mounting Plate Version Pin Out Specification ST Version NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.C 6 of 6 North America only