Click on Series name for product info on aimtec.com Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter FEATURES: • I/O Isolation 4000VAC • Energy Star compliant o o • Operating Temp: -40 C to +70 C • Ultra-small package • Over load, Over Voltage, Short Circuit Protection • Up to 82% efficiency • Universal Input: 90-264VAC, 47-440Hz, or 130-170VDC Models CB Single output Maximum Efficiency Input Output Input Voltage Max Output Output capacitive (%) Model Voltage Current max (VAC/Hz) wattage (W) Voltage(V) load 115 230 (VDC) (A) VAC VAC (µF) AMEL20-3.3SMAZ 90-264/47-440 130-370 13.2 3.3 4 5600 74 71 AMEL20-5SMAZ 90-264/47-440 130-370 20 5 4 4700 77 77 AMEL20-12SMAZ 90-264/47-440 130-370 20 12 1.66 3300 80 79 AMEL20-15SMAZ 90-264/47-440 130-370 20 15 1.33 2200 80 81 AMEL20-24SMAZ 90-264/47-440 130-370 20 24 0.84 1000 77 79 Models Asymmetric Dual output Rated Efficiency Maximum Input Input Output Max Output Output capacitive (%) Model Voltage Voltage Voltage Current (A) wattage (W) load 115 230 (VAC/Hz) (VDC) (V) VAC VAC (µF) AMEL20-3.35DMAZ 90-264/47-440 130-370 17.5 3.3/5 1.4/2.5 1000 75 76 AMEL20-3.312DMAZ 90-264/47-440 130-370 18 3.3/12 1.4/1.1 1000 78 78 AMEL20-3.315DMAZ 90-264/47-440 130-370 18 3.3/15 1.4/0.89 1000 77 77 AMEL20-3.324DMAZ 90-264/47-440 130-370 18 3.3/24 1.4/0.55 1000 76 76 AMEL20-512DMAZ 90-264/47-440 130-370 18 5/12 1.6/0. 83 680 76 77 AMEL20-515DMAZ 90-264/47-440 130-370 18 5/15 1.6/0.66 680 78 79 AMEL20-524DMAZ 90-264/47-440 130-370 18 5/24 1.6/0.46 680 75 76 AMEL20-1215DMAZ 90-264/47-440 130-370 18 12/15 0.66/0.66 560 77 78 AMEL20-1224DMAZ 90-264/47-440 130-370 18 12/24 0.58/0. 42 560 79 80 AMEL20-1524DMAZ 90-264/47-440 130-370 18 15/24 0.54/0. 42 560 80 81 AMEL20-3.3N5DMAZ 90-264/47-440 130-370 14.8 -3.3/5 -0.7/2.5 680 75 76 AMEL20-3.3N12DMAZ 90-264/47-440 130-370 18 -3.3/12 -1.4/1.1 680 76 77 AMEL20-3.3N15DMAZ 90-264/47-440 130-370 18 -3.3/15 -1.4/0.89 680 76 77 AMEL20-5N5DMAZ 90-264/47-440 130-370 14 -5/5 -0.8/2 680 75 76 AMEL20-5N12DMAZ 90-264/47-440 130-370 18 -5/12 -1.6/0. 83 470 75 76 AMEL20-5N15DMAZ 90-264/47-440 130-370 18 -5/15 -1.6/0.66 470 75 76 AMEL20-12N12DMAZ 90-264/47-440 130-370 18 -12/12 -0.66/0.83 470 77 78 AMEL20-12N15DMAZ 90-264/47-440 130-370 18 -12/15 -0.66/0.66 330 76 77 Note: Optional mounting plate version can be ordered by adding “-ST” suffix to part number (ex. AMEL20-5SMAZ-ST) *Output power must not exceed the listed values NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Conditions Typical Maximum Units 115VAC 500 mA Current (full load) 230VAC 350 mA 115VAC  30 A Inrush current <2ms (cold start) 230VAC 50 A  www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.D 1 of 6 North America only Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Input Specifications (continued) Parameters Conditions Typical Maximum Units Leakage current  0.25 mA External fuse Recommended slow blow type 1.5 A Input dissipation 110/230Vac ≤1 W Start up time 50 ms Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy ±2 % Line regulation ±1 % Load regulation (single output) 0-100% load ±2 % Load regulation (dual output) Unbalanced (0-100%) load ±3 % Transient recovery time 500 µs Transient response deviation 25% load step ±2 % of Vout 3.3 & 5V models 100 150 Ripple & Noise* mV p-p 12, 15 & 24V models 150 200 110VAC 10 Hold-up time ms 230VAC 25 *Ripple and Noise are measured at 20MHz bandwidth & 230VAC by using a 0.1μF (M/C) and 47µF (E/C) parallel capacitor. Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 60 sec 4000 VAC Isolation resistance >1000 MΩ General Specifications Parameters Conditions Typical Maximum Units Switching frequency 65 KHz Over load protection Foldback 150 % Over voltage protection Zener Diode Clamp Short circuit protection Auto recovery Protection class Class II o Operating temperature See derating table -40 to +70 C o Maximum case temperature 100 C o Storage temperature -45 to +95 C o Temperature coefficient ±0.02 % / C Cooling Free air convection Humidity Non condensing 20 ~ 95 % RH Case material Plastic (flammability to UL 94V-0) Weight 70 g Dimensions (L x W x H) 2.22 x 1.21 x 0.99 inches 56.48 x 30.86 x 25.10mm o > 400 000 hrs (MIL-HDBK -217F, t=+25 C)/Full Load MTBF > 100,000 hrs (MIL-HDBK -217F, t=at highest operating temperature)/Full Load Environment Approval Test Parameters Conditions Wave form Half sine wave Acceleration amplitude 5gn Shock Bump duration 30 ms Converter operation before and after test, body mounted (on chassis) Number of bumps 18 (3 in each direction for every axis) Test mode Sweep sine Displacement 1mm Vibration Acceleration 3g Converter operation 10-100Hz, speed 0.05Hz/s www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.D 2 of 6 North America only Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Safety Specifications Parameters Agency approvals cULus, CE, CB Medical Electrical Equipment IEC\EN\UL 60601-1, 2 x MOOP, CSA-C22.2 No. 601.1-M90 Information technology Equipment EN 60950-1:2006+A11:2009 EMI - Conducted and radiated emission EN55022, class B Harmonic Current Emissions IEC/EN 61000-3-2, Class A Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2, Contact ±4KV/Air ±8KV, Criteria A Standards RF, Electromagnetic Field Immunity IEC 61000-4-3, 3V/m, Criteria A Electrical Fast Transient/Burst Immunity IEC 61000-4-4, ±1KV, Criteria A Surge Immunity IEC 61000-4-5, ±2KV, Criteria A RF, Conducted Disturbance Immunity IEC 61000-4-6, 3Vrms, Criteria A Voltage dips, Short Interruptions Immunity IEC 61000-4-11 Information Technology Equipment UL 60950-1:2007 Information Technology Equipment CAN/CSA-C22.2 No.60950-1-07 Additional Surge Protective Circuitry The AMEL20-MAZ series design level surge protection is certified to IEC 61000-4-5 surge Line to Line of 1KV. However greater protection can be enhanced by adding protective devices to ingress circuitry. For example, by adding an MOV (Metal Oxide Varistor) device example TVR10471KSY to the N / L input lines 2KV surge protection or greater, can be achieved. L Fuse + Vo+ Aimtec MOV AC-DC Converter N - Vo- Vrms Vdc Wmax (2ms) Pmax MOV PN V V J W TVR10471KSY 300 385 70 0.4 Pin Out Specifications Pin Single Dual positive Dual negative/positive 1 AC Input (L) AC Input (L) AC Input (L) 2 AC Input (N) AC Input (N) AC Input (N) 3 +V Output +V1 Output +V1 Output 4 -V Output Common Common 5 No pin +V2 Output -V2 Output www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.D 3 of 6 North America only Load Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Dimensions 56.46 (2.22) 45.72 (1.80) 3 1 3 4 1 Top View 4 Top View 2 5 2 5 5.37 5.37 The hottest area (0.21) (0.21) DIV: 10.00 (0.40) 5Ø 1.0 (Ø 0.04) Dimensions mm (inch) Case Tolerance ±0.50 (±0.02) 1.05 Pin Diameter 1.0 ± 0.05 (0.04 ± 0.002) (0.04) Pin Pitch Tolerance ±0.35 (±0.014) Derating Free Air Convection 50°C 100 80 60 Safe Operating Area 40 20 70°C 0 80 - 40 - 20 0 20 40 60 100 º C Ambient Temperature www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.D 4 of 6 North America only 30.86 (1.21) 25.10 5,27 20.32 5.27 (0.99) (0.80) (0.21) (0.21) Output Power (%) 8.00 (0.31) 10.20 10.20 (0.40) (0.40) Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Derating (Dual Output Models) Free Air Convection 40°C 100 80 60 Safe Operating Area 40 20 70°C 0 80 - 40 - 20 0 20 40 60 100 º C Ambient Temperature www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.D 5 of 6 North America only Output Power (%) Series AMEL20-MAZ 20 Watt | AC-DC / DC-DC Converter Dimensions of Optional ST Mounting Plate Version Pin Out Specification ST Version NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R9.D 6 of 6 North America only