Click on Series name for product info on aimtec.com Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter FEATURES: • AC-DC Constant Current or Constant • Over Temperature Protection Voltage LED Driver • Over Current Protection • Input range 90-305VAC/47-440Hz • Waterproof Case rated IP68 • High Efficiency up to 86% • Power Factor Correction • Operating temperature -40 to 85°C • Short Circuit Protection • Dimmable via resistive / 0-10Vdc / PWM Models • 5 Years Limited Warranty Single output Max Output OC Efficiency Output Input Input Output Voltage P / (%) Mode of Current Model Voltage Voltage Power Range OV Operation ③ 115 230 277 (A) (VAC/Hz) (VDC) ① ③ VAC VAC VAC P (W) (V) 1.27 Constant Current 84 86 86 90-305/47- AMEPR60C-50120AZ 60 36-50 0 - 1.20 130-430 ② 50.7 440 Constant Voltage 84 86 86 1.77 Constant Current 84 86 86 90-305/47- AMEPR60C-36170AZ 59.8 24-36 0 - 1.70 130-430 ② 36.6 440 84 86 86 Constant Voltage 2.55 Constant Current 82 83 83 90-305/47- AMEPR60C-24250AZ 60 12-24 0 - 2.50 130-430 ② 24.5 440 Constant Voltage 82 83 83 5.2 Constant Current 79 80 81 90-305/47- AMEPR60C-12500AZ 60 5-12 0 - 5.0 130-430 ② 12.3 440 Constant Voltage 79 80 81 ① Exceeding the maximum output power will permanently damage the converter ② The dimming feature is not supported when units are used in Constant Voltage mode only. ③ In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown. All models can be ordered with optional North American colour input wires (black (L), white (N), green (GND)). Add “–NA” to part number when ordering. Note: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25°C, humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See http://www.aimtec.com/terms-sale AMEPR60C-AZ’s AC/DC LED drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities with the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial, and other areas or regions which are prone to ‘dirty’ electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or cause early life failure of product. In this case consideration should be made by the end user to ensure that adequate line or mains surge suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure to identify excessive line surges violations prior to installation may damage sensitive equipment permanently. Input Specifications Parameters Conditions Typical Maximum Units 115VAC 30 Inrush current <2ms A 230VAC 50 115VAC 0.5 Leakage current mA 230VAC 0.7 115VAC 0.73 AC current A 230VAC 0.33 115VAC 0.98 Power Factor 230VAC 0.96 277VAC 0.93 External fuse 250V/1.5A Start up time 250 ms Surge voltage 2sec 440 V Output Specifications Parameters Conditions Typical Maximum Units Current accuracy (CC Mode) ±3 % Voltage accuracy (CV Mode) ±3 % Line regulation LL-HL ±1 % www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 1 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter Load regulation 0-100% load ±3 % ④ Ripple & Noise 20MHz Bandwidth 75 mV p-p Hold-up time 90 ms Current adjustment range 100-10 % Minimum Load Voltage See the models table ④ Tested with 0.1µF (C/C) or (M/C) and 47µF (E/C) parallel capacitors at the end. Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec/3.5mA 3000 VAC Isolation Resistance 500VDC >1000 MΩ Isolation Capacitance 1000 pF General Specifications Parameters Conditions Typical Maximum Units Switching frequency 130 KHz AMEPR60C-50120AZ 1.27 AMEPR60C-36170AZ 1.77 Over current protection A AMEPR60C-24250AZ 2.55 AMEPR60C-12500AZ 5.2 Over voltage protection Refer to Constant Current vs. Constant Voltage Mode curve Short circuit protection Continuous Short circuit restart Auto recovery Over temperature protection >105°C o Operating temperature With derating over 55°C -40 to +85 C o Maximum case temperature 100 C o Storage temperature -40 to +95 C o Temperature coefficient ±0.02 % / C Cooling Free air convection Humidity 95 % RH Case material Plastic Potting Epoxy (IP67 rated) Wires UL1015 18AWG *20CM Weight 530 g Dimensions (L X H X W) 5.30 x 2.27 x 1.59 inches 134.80 x 57.68 x 40.50 mm MTBF >400,000 hrs (MIL-HDBK-217F at +25°C) Safety Specifications Parameters Agency approvals cULus, CE UL8750, UL60950-1, EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13 Information Technology Equipment EN55022 Class B Harmonic Current Emissions IEC/EN 61000-3-2, Class C Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 Standards RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient / Burst Immunity IEC 61000-4-4 Level 2 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 1 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 2 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter Dimensions End View 40.50 (1.59) Top View 16.75 137.33 (0.66) (5.41) 60.00 (2.36) 32.00 60.00 (1.26) (2.36) Side View 200.00 200.00 40.50 (8.00) (8.00) (1.59) 2.30 (0.09) Input/Output Wires are 18 AWG 20cm 161.30 (6.35) Wire connection: Connection Wire Brown AC L Blue AC N Green Ground Red +V output Black -V Output Blue (Dimming) + Vs dimming White (Dimming) -Vs dimming Temperature Graph Free Air Convection 55 º C 100 80 Safe Operating Area 60 40 20 0 85 -40 -20 0 20 40 60 80 100 Ambient Temperature º C www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 3 of 13 North America only Output Power % Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter Dimming Control “C” Versions AMEPR60C-50120AZ (A) Dimming-Resistance VS Output Current 1.40 1.20 100 90 1.00 80 70 0.80 60 0.60 50 40 0.40 30 0.20 10 0 20 0.00 K(Ω) 0 20 40 60 80 100 120 (A) Dimming-PWM VS Output Current 1.40 95 1.20 90 80 1.00 70 0.80 60 0.60 50 0.40 40 30 0.20 6 10 20 0.00 0 20 40 60 80 100 120 (Duty%) (A) Dimming- 0-10Vdc VS Output Current 1.40 1.20 10.00 9.00 1.00 8.00 7.00 0.80 6.00 0.60 5.00 0.40 4.00 3.00 0.20 0.00 1.00 2.00 0.00 0.00 2.00 4.00 6.00 8.00 10.00 12.00 (V) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 4 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter AMEPR60C-36170AZ (A) Dimming-Resistance VS Output Current 2.00 1.80 100 1.60 90 1.40 80 1.20 70 60 1.00 50 0.80 40 0.60 30 0.40 20 0.20 10 0 0.00 K(Ω) 0 20 40 60 80 100 120 (A) Dimming-PWM VS Output Current 1.80 95 1.60 90 1.40 80 1.20 70 1.00 60 0.80 50 0.60 40 0.40 30 20 0.20 6 10 0.00 0 20 40 60 80 100 120 (Duty%) (A) Dimming- 0-10Vdc VS Output Current 2.00 10.00 1.80 1.60 9.00 1.40 8.00 1.20 7.00 1.00 6.00 0.80 5.00 0.60 4.00 0.40 3.00 0.20 0.00 1.00 2.00 0.00 0.00 2.00 4.00 6.00 8.00 10.00 12.00 (V) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 5 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter AMEPR60C-24250AZ Dimming-Resistance VS Output Current (A) 3.00 2.50 100 90 80 2.00 70 60 1.50 50 40 1.00 30 0.50 20 10 0 0.00 K(Ω) 0 20 40 60 80 100 120 (A) Dimming-PWM VS Output Current 3.00 95 2.50 90 2.00 80 70 1.50 60 50 1.00 40 30 0.50 20 6 10 0.00 0 20 40 60 80 100 120 (Duty%) (A) Dimming- 0-10Vdc VS Output Current 3.00 10.00 2.50 9.00 2.00 8.00 7.00 1.50 6.00 5.00 1.00 4.00 3.00 0.50 2.00 1.00 0.00 0.00 0.00 2.00 4.00 6.00 8.00 10.00 12.00 (V) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 6 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter AMEPR60C-12500AZ (A) Dimming-Resistance VS Output Current 6.00 5.00 100 90 4.00 80 70 3.00 60 50 2.00 40 30 1.00 20 10 0 0.00 K(Ω) 0 20 40 60 80 100 120 (A) Dimming-PWM VS Output Current 6.00 95 5.00 90 4.00 80 70 3.00 60 50 2.00 40 1.00 30 20 10 6 0.00 0 20 40 60 80 100 120 (Duty %) (A) Dimming- 0-10Vdc VS Output Current 6.00 5.00 10.00 9.00 4.00 8.00 7.00 3.00 6.00 5.00 2.00 4.00 3.00 1.00 2.00 0.00 1.00 0.00 0.00 2.00 4.00 6.00 8.00 10.00 12.00 (V) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 7 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter Efficiency Vs. Input Voltage & Output Current (Constant current load) AMEPR60C-50120AZ (%) Efficiency Vs. Input Voltage & Output Current 230Vac, 1.2, 110Vac 88.0 110Vac, 1.2, 230Vac 87.9 110Vac, 0.24, 81.4 230Vac, 0.24, 74.0 (A) AMEPR60C-36170AZ (%) Efficiency Vs. Input Voltage & Output Current 230Vac, 1.7, 110Vac 88.0 110Vac, 1.7, 230Vac 87.9 110Vac, 0.34, 81.4 230Vac, 0.34, 74.6 (A) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 8 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter AMEPR60C-24250AZ (%) Efficiency Vs. Input Voltage & Output Current 230Vac, 2.5, 110Vac 87.0 230Vac 110Vac, 2.5, 85.4 110Vac, 0.5, 81.7 230Vac, 0.5, 78.1 (A) AMEPR60C-12500AZ (%) Efficiency Vs. Input Voltage & Output Current 230Vac, 5, 110Vac 84.9 230Vac 110Vac, 5, 83.9 110Vac, 1, 73.4 230Vac, 1, 72.9 (A) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 9 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter PFC Value vs. Output Load Current (constant current mode) AMEPR60C-50120AZ PFC value Vs. Output Load Current (value) 115VAC, 115VAC 100%, 1.00 115VAC, 50%, 230VAC 0.98 230VAC, 100%, 0.96 230VAC, 50%, 0.91 (load) AMEPR60C-36170AZ PFC value Vs. Output Load Current (value) 115VAC, 115VAC 115VAC, 50%, 100%, 0.99 230VAC 0.98 230VAC, 100%, 0.96 230VAC, 50%, 0.88 (load) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 10 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter AMEPR60C-24250AZ PFC value Vs. Output Load Current (value) 115VAC, 50%, 115VAC, 115VAC 0.98 100%, 1.00 230VAC 230VAC, 100%, 0.94 230VAC, 50%, 0.77 (load) AMEPR60C-12500AZ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 11 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter Constant Current vs. Constant Voltage Mode AMEPR60C-50120AZ Constant Current Vs. Constant Voltage (A) Normal Input, Normal Input, 36 36, 1.21 50, 1.22 38 40 Normal Input, Normal Input, 52, 0.00 50.4, 0.00 (V) AMEPR60C-36170AZ Constant Current Vs. Constant Voltage (A) Normal Input, Normal Input, 24 36, 1.73 24, 1.71 26 28 Normal Input, Normal Input, 38, 0.00 36.4, 0.00 (V) www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 12 of 13 North America only Series AMEPR60C-AZ up to 5A | AC-DC / DC-DC | LED Driver / Converter AMEPR60C-24250AZ Constant Current Vs. Constant Voltage (A) Normal Input, Normal Input, 12 24, 2.53 12, 2.51 14 16 Normal Input, Normal Input, 26, 0.00 24.5, 0.00 (V) AMEPR60C-12500AZ Constant Current Vs. Constant Voltage (A) Normal Input, Normal Input, 5 5, 5.04 12, 5.02 6 7 Normal Input, Normal Input, 14, 0.00 12.3, 0.00 (V) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.I 13 of 13 North America only