Click on Series name for product info on aimtec.com Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter FEATURES: • AC-DC Constant Current or Constant • Over Voltage Protection Voltage LED Driver • Over Current Protection • Input range 90-305VAC/47-440Hz • Waterproof Case rated IP68 • High Efficiency up to 89% • Power Factor Correction • Operating temperature -40 to 80°C • Short Circuit Protection • Dimmable via resistive Models • 5 Years Limited Warranty Single output Max Output Efficiency Output Input Input Output Voltage (%) Current Model Voltage Voltage Mode of Operation Power Range ③ 115 230 277 (VAC/Hz) (VDC) (A) ① ③ VAC VAC VAC (W) (V) Constant Current 87 89 89 AMER150-50300AZ 150 36-50 0-3 90-305/47-440 130-430 ② 87 88 89 Constant Voltage Constant Current 86 88 88 AMER150-36420AZ 150 24-36 0-4.16 90-305/47-440 130-430 ② Constant Voltage 86 88 88 Constant Current 85 87 87 AMER150-24630AZ 151.2 12-24 0-6.3 90-305/47-440 130-430 ② Constant Voltage 85 87 87 Add Suffix “-F” No dimming option ① Exceeding the maximum output power will permanently damage the converter ② The dimming feature is not supported when units are used in Constant Voltage mode only, Aimtec suggests to order “-F” No dimming option in this case. ③ In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown. All All models can be ordered with optional North American colour input wires (black (L), white (N), green (GND)). Add “–NA” to part number when ordering. NOTE: Aimtec limited warranty of 5 years is valid based on product operation at datasheet specifications at ambient temperature of 25°C, humidity<75%, nominal input voltage (115/230/277VAC) and at rated output load unless otherwise specified. See http://www.aimtec.com/terms-sale AMER150-AZ’s AC/DC LED drivers have electrical safeguards designed within to protect it from conventional electrical abnormalities with the levels listed in the safety table. Applications for use within rural agricultural, heavy industrial, and other areas or regions which are prone to ‘dirty’ electrical conditions which would subject any of the above models to excessive voltages surges or spikes, may damage or cause early life failure of product. In this case consideration should be made by the end user to ensure that adequate line or mains surge suppression is installed in front of Aimtec device to ensure the longevity of the products. Failure to identify excessive line surges violations prior to installation may damage sensitive equipment permanently. Input Specifications Parameters Conditions Typical Maximum Units 115 VAC 2000 mA Current (full load) 230 VAC 1000 mA 277 VAC 900 mA 115 VAC 50 A Inrush current <2ms (cold start) 230 VAC 75 A 277 VAC 90 A I/O 0.25 mA Leakage current I/FG, O/FG 3.5 mA 115 VAC 0.98 Power factor 230 VAC 0.94 277 VAC 0.92 External fuse Recommended slow blow type 3.5 A Start-up time 900 ms Output Specifications www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 1 of 10 North America only Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter Parameters Conditions Typical Maximum Units Current accuracy ±3 % Line regulation LL-HL ±2 % Load regulation 0-100% load ±3 % ④ 200 mV p-p Ripple & Noise Hold-up time (min) 40 ms ⑤ Current adjustment range 100-10 % ④ Ripple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) or (C/C) and 47µF (E/C) parallel capacitor. ⑤ Note: from 0% to 10% dimming adjustment signal instability may be present. Isolation Specifications Parameters Conditions Typical Maximum Units I/O 3sec 3750 VAC Tested voltage I/FG 2000 VAC O/FG 500 VAC Isolation resistance 500 VDC >1000 MΩ General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100 KHz AMER150-50300AZ 3.07 Over current protection AMER150-36420AZ 4.27 A AMER150-24630AZ 6.37 Over voltage protection Refer to Constant Current vs. Constant Voltage Mode curve Short circuit protection Auto recovery o Operating temperature See derating table -40 to +80 C o Maximum case temperature 100 C o Storage temperature -40 to +95 C o Temperature coefficient ±0.02 % / C Cooling Free air convection Humidity Non condensing 95 % RH Case material Aluminum Potting Epoxy (IP68 rated) Wires UL1015 18AWG input & 14AWG output *20CM Weight 900 g Dimensions (L X H X W) 7.13 x 2.32 x 1.85 inches 181.00 x 59.00 x 47.00 mm MTBF >400,000 hrs (MIL-HDBK-217F at +25°C) Safety Specifications Parameters Agency approvals cULus, CE UL8750, UL60950-1, EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13 Information Technology Equipment EN55022 Class B Harmonic Current Emissions IEC/EN 61000-3-2, Class C Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Level 3 Standards RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient / Burst Immunity IEC 61000-4-4 Level 2 Surge Immunity IEC 61000-4-5 Level 3 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Level 1 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 Dimensions www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 2 of 10 North America only Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter Top View 181.00 (7.13) 4.00 (0.16) 41.00 27.00 (1.73) (1.06) 8.00 (0.32) End View 11.00 Tc 23.00 (0.43) (0.91) Side View 200.00 200.00 59.00 47.00 (8.00) (8.00) (2.32) (1.85) 2.30 (0.09) Input/Output Wires are 18 AWG 20cm Measurements in Millimeters (inch) Case Tolerance: ±0.5 (±0.02) Wire connection: Connection Wire Brown AC L Blue AC N Green Ground Red +V output Black -V Output Blue (Dimming) + Vs dimming White (Dimming) -Vs dimming Analog (resistive) Dimming Application Circuit BROWN +Vou RED Maximum Pot L Model Number t st GREEN Value (kΩ) 1 LED 1 AC AMER150-50300AZ 19.00 AMER150-AZ AMER150-36420AZ 28.00 -Vout AMER150-24630AZ 27.00 N 1 BLUE BLUE BLACK Pot WHITE 0-10V Dimming Application Circuit www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 3 of 10 North America only Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter U1 0-10Vdc +Vs -Vs LTV-817C GND PWM (1KHz) Dimming Application Circuit Derating Free Air Convection 55°C 100 80 60 Safe Operating Area 40 20 85°C 0 80 - 40 - 20 0 20 40 60 100 º C Ambient Temperature Efficiency vs. Input Voltage & Output Current (CC mode) AMER150-50300AZ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 4 of 10 North America only Output Power (%) R28 1K5, 0805 Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter AMER150-36420AZ AMER150-24630AZ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 5 of 10 North America only Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter PFC value vs. Output Load Current (CC mode) AMER150-50300AZ AMER150-36420AZ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 6 of 10 North America only Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter AMER150-24630AZ Constant Current vs. Constant Voltage Mode www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 7 of 10 North America only Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter AMER150-50300AZ AMER150-36420AZ AMER150-24630AZ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 8 of 10 North America only Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter Output Current vs. Radj AMER150-50300AZ AMER150-36420AZ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 9 of 10 North America only Series AMER150-AZ up to 6.3A | AC-DC / DC-DC | LED Driver / Converter AMER150-24630AZ NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052.1e R3.AG 10 of 10 North America only