AIMTEC AMLB-1810IZ

Click on Series name for product info on aimtec.com Not recommended for new design Series AMLB-IZ 100mA | LED Driver FEATURES:  Step Up LED Driver  Constant Output Current  Wide (7:1) Input Voltage Range  High Efficiency  Remote Control Function  PWM Dimming Function (10 – 90%)  24 Pin DIP Package  Analogue Dimming  Non-Isolated Models Single output Maximum Rated Model Input Voltage (V) Output Voltage (V) Efficiency Max (%) Current (mA) AMLB-1810IZ 3-18 5-38 100 90 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units Voltage range 12 3-18 18 VDC On/Off Control (Analog Control) ON: Vr = DC Input Voltage Input voltage range (0-12Vdc) OFF:DC = 0V (Leave open if not used) Dimming Control (Digital Control) Max PWM Frequency (10%~90%) 200Hz Output Specifications Parameters Conditions Typical Maximum Units Current accuracy ±5 % Short Circuit protection Connect an external input fuse (1A/250) Output Open Protection No Load Max load capacitance 100 µF General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 1.2 MHz o Operating temperature -40 to +85 C o Storage temperature -40 to +125 C o Max Case temperature 100 C Cooling Free Air Convection Humidity 95 % RH Case material Non-Conductive Black Plastic Potting material Epoxy (Flammability UL94V-0) Weight 12 g Dimensions (L x W x H) 1.25 × 0.80 × 0.45 inches / 31.80 × 20.30 × 11.30 mm www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.D 1 of 3 North America only Not recommended for new design Series AMLB-IZ 100mA | LED Driver Pin Out Specifications Dimensions Single Pin 1 Remote On/Off 2 -Vin 3 -Vin 9 NC 11 NC 14 LED + 16 LED - 22 +Vin 23 +Vin 24 DIM NC: Not Connected Derating www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.D 2 of 3 North America only Not recommended for new design Series AMLB-IZ 100mA | LED Driver Application Circuit + Vin st Dimming 1 LED C1 Dim + Vin 0.01uF LED + If analogue DIM is not used C1 must AMLB-IZ be installed LED - ON/OFF GND ON/OFF Leave Open if not used Last LED GND Dimming Performance AMLB‐1810‐IZ Dimming 100 90 80 70 60 50 40 30 20 10 0 1 234 56 789 10 11 Duty Cycle PWM @ 200 Hz NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.D 3 of 3 North America only Output Current