® SB 350 Connectors - up to 500 Amps ® The SB 350 is the largest connector in the series with power capabilities up to 450 amps with 4/0 AWG wire and 500 amps with a 350 mcm wire. Wires ranging from #1/0 (53.5 mm²) to 350 mcm (150 mm²) Ţ t into the one piece housing available in standard PC or a chemical resistant PBT/PC blend. Silver plated wire or busbar contacts minimize electrical resistance while offering supreme durability and reliability. • Up to 350 mcm (150 mm²) Wires Allows UL rated currents up to 500 amps • Chemical Resistant Housing Option Extends temperature range down to -40°C, while offering enhanced UV and chemical resistance • Same Housings Used for Wire and Busbar Contacts Enables color-coded mechanically keyed wire to busbar connections ® | SB 350 ORDERING INFORMATION | ® SB 350 Standard Housings ® The largest SB housings work with wire contacts up to 350 mcm [150 mm²] as well as busbar contacts. Gen- Bottom View ® derless design mates with itself. Mechanical keys are color coded. NOTE: SB 350 Black and Blue Housings have the same keying features and can be intermated. Description --- Part Numbers --- [ 107.9 ] Minimum Quantity ...... 50 25 ... 4.25 Yellow 914-BK 914 [ 6.6 ] Ø 0.26 Orange 932-BK 932 (2) PLC’S Red 913-BK 913 [ 69.9 ] Gray 906-BK 906 2.75 Blue 912-BK 912 Green 931-BK 931 Black 2-7250G8 - [ 28.6 ] [ 34.9 ] MATERIAL ID P = Chemical Resistant 1.13 1.38 ® SB 350 Chemical Resistant Housings ® [ 182.6 ] Same features as the Standard SB 350 but molded in a 7.19 chemical resistant PBT/ PC blend. Suitable for use to -40°C. Description --- Part Numbers --- Minimum Quantity ...... 50 25 .... Red P913-BK P913 Gray P906-BK P906 Mated Length ® SB 350 Silver Plated Wire Contacts Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. See reducing bushings in accessory section for smaller wires. [ 32.8 ] [ C ± 2.0 ] 1.29 MIN C ± 0.08 Dimensions Mating - A - - B - - C - A AWG mm² Force - Loose Piece Part Numbers - inches mm inches mm inches mm B Minimum Quantity .............. 200 150 50 ............................................................................. 300mcm 152 High - 910-BK 910 * 0.75 19.05 0.87 22.10 3.04 77.2 4/0 107.2 High 908-BK - 908 * 0.64 16.26 0.75 19.05 3.03 77.0 3/0 85 High 916-BK - 916 * 0.58 14.73 0.70 17.78 3.00 76.2 [ 20.6 ] 2/0 67.4 High 907-BK - 907 * 0.49 12.45 0.64 16.26 2.96 75.2 0.81 1/0 53.5 High 917-BK - 917 * 0.44 11.18 0.51 12.95 2.91 73.9 * Sold as pairs. 2 parts shipped for every 1 part ordered. © 2018 Anderson Power Products, Inc. All rights reserved. APP®, Anderson Power Products®, A®, SB® and the APP Logo are registered trademarks of Anderson Power Products, Inc. - 82 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SB 350 SECTION 3 ® SB 350 ® SB 350 Silver Plated Busbar Contacts [ 131.7 ] # 3/8 - 16 THD Use 2 busbar contacts per housing to provide a quick disconnect input or output busbar 5.19 connection. Busbar contacts are for mating with wire contacts only. Part number 350BBS [ 22.3 ] B includes lock nuts. Locknuts must be ordered separately for B01998P1. 0.88 [ 17.0 ] 0.67 Mating Type Thread Force - Loose Piece Part Numbers - Minimum Quantity .................. 50 10 ............. See Busbar contact drawing on [ 2.5 ] Busbar 3/8-16 High B01998P1 350BBS website for further detail. 0.10 Lock Nut 3/8-16 - H1216P9 110G73 NOTE: Has not been tested by UL. ® | SB 350 CONNECTOR SPECIFICATIONS | Electrical Mechanical 1 Current Rating Amperes UL 1977 CSA Wire Size Range AWG mm² Wire to Wire (4/0 AWG) 450 Wire Contacts with Bushings 1/0 to 350 mcm 53.5 to 150 Wire to Wire (350 mcm) 500 325 Max. Wire Insulation Diameter in. mm Voltage Rating AC/DC 1.100 27.900 UL 1977 600 Operating Temperature ² °F °C Dielectric Withstanding Voltage Standard -4° to 221° -20° to 105° Volts AC 2,200 Chemical Resistant -40 to 221° -40° to 105° 1 Avg. Mated Contact Resistance Milliohms Mating Cycles No Load by Plating Silver (Ag) 2 1/2” of 300mcm wire 0.050 Wire and Busbar Contacts 10,000 Hot Plug Current Rating Amperes - Wire & Busbar Avg. Mating / Unmating Force Lbf. N 2 Pole 30 133 250 cycles at 120V DC 100A Min. Contact / Spring Retention Force Materials lbf 150 N 667 Housing Standard Plastic Resin Polycarbonate Chem. Resistant Resin Polycarbonate / PBT blend NOTE 1: See IEC 60664-1 for working voltage. Contact Retention Spring Stainless Steel ¹ Based on: 105°C rated or better cable of the largest size, Properly calibrated APP recommended tooling, and a 25°C ambient temperature. UL rating not to exceed the Housing Flammability Rating UL94 V-0 maximum operating temperature. CSA rating below a 30°C temperature rise. Glow Wire 960°C (GWFI) / 800°C (GWIT) ² Limited by the thermal properties of the connector plastic housing. ³ Use APP recommended tooling only. Alternate tools may adversely affect the 4 Wire & Busbar Contacts performance of our connectors along with UL and CSA recognition. Base Copper Alloy 4 Plating Silver Has not been tested by UL. Contact Termination Methods Crimp ³ Wire Contacts Hand Solder Wire Contacts Wrench / Socket Busbar Contacts | IEC INFORMATION | Connector Creepage/Clearance Material Series Configurations per IEC 60950-1 Group Unmated 5.66 mm IIIa SB®350 Mated 5.66 mm Protection Attributes SB350 Touch Safety with Wire Contacts AMP Rating AC/DC 350 IEC 60529 IP10 Voltage Rating AC/DC (Steady State) 500 V AC/DC (Operational) Breaking Capacity - AMP Rating /Cycles 100 Amp / 10 cycles Voltage Rating (Breaking Capacity) 125 VDC Finger Safety - Mated only IEC 60529 - IP20 Wire Size tested 120 mm² Contact Series Tested 908 Climatic Testing (Cold,Heat & MFG) IEC 60512 Test -11j, 11i & 11g, NOTE 2: Refer to the Constructional Data form for additional Cycle Life IEC 60512 Test 9a - 5000 Cycles information on our website., www.andersonpower.com Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - dropped 8 times Temperature Range -20 °C to 105 °C -4 °F to 221 °F - 83 - All Data Subject To Change Without Notice www.andersonpower.com Temperature rise charts are based on a ® | SB 350 CONNECTOR TEMPERATURE CHARTS| 25°C ambient temperature. For Temperature Rise Above 60°C, Consult the Extended Temperature Rise Charts in the Appropriate Product Section on the Website. Current - Temperature Derating per IEC 60512-5-2 Test 5B ® ® SB 350 SB 350 Derating vs. Ambient Temperature Temperature Rise at Constant Current 125 60 50 100 40 30 75 20 50 10 0 25 0 50 100 150 200 250 300 350 400 450 500 0 50 100 150 200 250 300 350 400 450 500 550 Amperes Applied Amperes Applied 350 MCM 300 MCM 4/0 AWG 350 MCM 300 MCM 4/0 AWG 3/0 AWG 2/0 AWG 1/0 AWG 3/0 AWG 2/0 AWG 1/0 AWG ® | SB 350 ACCESSORIES | Cable Clamps Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. “A” frame handle 996G1 Cable Size (not included). Min / Max Min / Max Description Inches O.D. mm O.D. - Part Numbers - Minimum Quantity ............................................................................... 10 ..... Bolt On for Discrete Conductor 1.00 to 0.35 25.4 to 8.8 996G1 Discrete Conductor w/ Integral Handle 0.76 to 0.32 19.3 to 8.2 911 The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. 911 Handles Handle Handles are made out of durable PC plastic. Hardware to attach to connector body included in kits. Description ----- Part Numbers ----- Minimum Quantity .... 100 25 ... Clamp Gray Handle Kit - 995G2 Red Handle Kit - 995G4 Handle Only, Gray 3-5074P1 - Handle Only, Red 3-5074P3 - Handle Only, Black 3-5074P5 - Hardware Bag - 106G7 Dust Cover Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal. Description ----- Part Numbers ----- Minimum Quantity .............................. 500 50 ... Dust Cover with Lanyard Strap, Red 113890P3 134G3 Slide cover over mating end. ® SB 350 Lockout - 84 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SB 350 Temperature Rise Above Ambient (°C) Ambient Temperature (°C) SECTION 3 ® SB 350 Works with standard lockout - tagout equipment to prevent access to the mating interface of the connector. Made from durable PC plastic. Description --- Part Number --- Minimum Quantity ........... 25 ..... Red Lockout - Tagout Kit SB350-LOCKOUT SB350 Connector not included. Manual Release Bracket - Mounting Side Works with the Locking Side to ease mating and unmating connectors. Description ----------- Part Numbers ---------- Minimum Quantity ........... 66 25 10 ... Mounting Half Bracket and Hardware Kit - - 922G1 (charger). Bracket Only B00229P1 - - Hardware Bag - 106G6 - Manual Release Bracket - Locking Side with Cable Clamp Works with the Mounting Side to ease mating and unmating connectors. Locking Half Cable Size Components Min / Max Min / Max Description Inches O.D. mm O.D. - Part Numbers - Minimum Quantity ............................................................................... 10 .......... Bracket and Hardware Kit w/ Clamp Kit 0.94 to 0.61 23.7 to 15.5 919 The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. Mounting Half Manual Release Bracket - Locking Side no Cable Clamp Works with the Battery side to ease mating and unmating connectors. Description - Part Numbers - Minimum Quantity ................................... 10 ............. Bracket and Hardware Kit No Clamp Kit 919G1 Mounting Half Reducing Bushings: for Use with Contact # 907 Use with contact part number 907-BK to allow a smaller wire to be used with the connector. Electrical capability is derated with smaller wire. [ 28.4 ] [ 11.1 ] Contact Barrel Size Wire Size --- Part Numbers --- 1.12 0.44 Minimum Quantity ......................................... 500 100 ... 2/0 AWG [67.4 mm²] 1/0 AWG [53.5 mm²] 5918-BK 5918 Wire Entrance - 85 - All Data Subject To Change Without Notice 2018-0054 DS-SB350 REV C6 www.andersonpower.com ® SB - Tooling Information Loose Piece Wire Size Part Numbers Loose Piece Contact Crimp Tools Number Silver Pneumatic of Hand AWG mm² Plating Bench Tool Die Locator Crimps Tool SB®50 1307 #6 13.3 1388G6 1389G6 5900 1309G4 1387G1 Single #8 8.4 5952 5953 #10 / 12 5.3 / 3.3 1388G7 1389G7 5915 SB®120 1388G3 #1 42.4 1323G1 #2 33.6 1319 1368 1387G1 1389G4 Single 1388G4 #4 21.2 1319G4 Series #6 13.3 1319G6 SB®175 1/0 53.5 1382 #1 42.4 1347 1368 1387G2 1303G13 1304G32 Double #2 33.6 1383 Series #4 21.1 1384 1387G1 1388G4 1389G3 Single #6 13.3 1348 SB®350 N/A 300mcm 152 910 4/0 107.2 908 1303G3 1368 Double 3/0 85 916 Series 1387G2 1304G31 1303G12 2/0 67.4 907 1/0 53.5 917 NOTE: See website for the most current information. - 86 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SB