SECTION 3 ® SBS 50 & 75 ® SBS Connectors - up to 110 amps ® The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits. ® This is of particular importance in applications where SBS 75G DC voltages exceed 30 volts and can be health threatening. ® SBS 75X Wire to Wire Wire-to-wire and wire-to-board configurations both provide power contacts rated up to 110 amps. The ® SBS75X offers up to 4 mate-last break-first auxiliary power / signal contacts rated up to 20 amps. The ® SBS75G features a third first-mate last-break ground or power contact. All contact positions are rated for circuit interruption (hot plugging). • Touch Safe Interface - Can safely be used in through panel applications - Minimizes potential contact with live circuits per IEC 60950 • Wire-to-Wire and Wire-to-Board Configurations Allows one connector to meet multiple needs ® SBS 50 • Ground or Auxiliary Positions Integrated into the One Piece Housing Meets all connection requirements in one compact connector housing ® | SBS ORDERING INFORMATION | ® SBS 50 Standard Housings Polycarbonate housings feature 2 positions all finger proof. Genderless design mates with itself. Mechanical keys are color coded. Description ----------- Part Numbers ----------- [ 19.1 ] [ 6.3 ] [ 3.6 ] Minimum Quantity ...... 500 50 ... 0.75 0.25 0.14 (2) Red SBS50RED-BK SBS50RED Gray SBS50GRA-BK SBS50GRA Blue SBS50BLU-BK SBS50BLU Black SBS50BLK-BK SBS50BLK Brown SBS50BRN-BK SBS50BRN [ 36.1 ] White SBS50WHT-BK SBS50WHT 1.42 [ 18.0 ] 0.71 ® SBS 50 Chemical Resistant (CR) Housings Material ID Same features as the standard housings, but molded out of a P = Chemical Resistant chemical resistant PBT/ PC blend. Suitable for use to -40°C. [ 55.8 ] Description ------------ Part Numbers ------------- 2.20 Minimum Quantity ...... 500 50 ... Red PSBS50RED-BK PSBS50RED [ 16.5 ] Gray PSBS50GRA-BK PSBS50GRA 0.65 Blue PSBS50BLU-BK PSBS50BLU Green PSBS50GRN-BK PSBS50GRN [84.8] Black PSBS50BLK-BK PSBS50BLK 3.34 Brown PSBS50BRN-BK PSBS50BRN © 2018 Anderson Power Products, Inc. All rights reserved. APP®, Anderson Power Products®, A®, SBS® and the APP Logo are registered trademarks of Anderson Power Products, Inc. - 57 - All Data Subject To Change Without Notice www.andersonpower.com ® SBS 75X Standard Housings Polycarbonate housings feature 4 auxiliary and 2 primary positions Front View all finger proof. Genderless design mates with itself, or the PCB Primary Power Contacts connector. Mechanical keys are color coded. Description ------------ Part Numbers ------------- [ 15.2 ] 0.60 Minimum Quantity ..... 250 50 ... Black SBS75XBLK-BK SBS75XBLK Socket Pin Brown SBS75XBRN-BK SBS75XBRN [ 46.0 ] 1.81 ® Bottom View SBS 75X Chemical Resistant (CR) Housings [ 28.9 ] Same features as the standard housings, but molded out of a 1.14 chemical resistant PBT/ PC blend. Suitable for use to -40°C. [ 32.5 ] 1.28 Description ------------ Part Numbers -------------- [ 55.9 ] [ 84.8 ] 2.20 3.34 Minimum Quantity ..... 250 50 .... Mated Length [ 32.5 ± 0.13 ] Green PSBS75XGRN-BK - 0.750 ± 0.005 Black PSBS75XBLK-BK PSBS75XBLK Material ID P = Chemical Resistant ® SBS 75X Assembled PCB Connector ® Fully assembled PCB connector is designed to mate with SBS 75X Mated Length Wire connector. All positions are preloaded with contacts including Side View [ 74.9 ] standard mating length auxiliary positions. Press fit board locks 2.95 Back View [ 46.1 ] [ 15.7 ] help secure the connector to the PCB before and after soldering. 1.81 0.62 Description ---- Part Number ----- [ 26.92 ] Minimum Quantity ..... 100 ..... 1.06 [ 56.8 ] Black SBS75XPRBLK-BK [ 41.00 ] [ 4.0 ] 2.24 [ 4.1 ] 0.16 (4) 1.614 0.16 (4) See PCB connector drawing on website for further detail. ® SBS 75G Wire Housings Polycarbonate housings feature three finger proof positions. The [ 46.0 ] center position can be used for pre-mate power or ground. Genderless 1.81 design mates with itself, or the PCB connector. Mechanical keys are color coded. Inquire with customer service for chemical resistant housings. [ 15.2 ] 0.60 Description ----------- Part Numbers ------------- [ 41.4 ] Premate Ground / Power 1.63 Minimum Quantity ..... 250 50 ..... [ 59.4 ] [ 28.9 ] 2.34 Blue SBS75GBLU-BK SBS75GBLU 1.14 Black SBS75GBLK-BK SBS75GBLK Brown SBS75GBRN-BK SBS75GBRN [ 14.5 ] White SBS75GWHT-BK SBS75GWHT [ 84.8 ] 0.57 3.34 Mated Length Material ID P = Chemical Resistant ® SBS 75G Assembled PCB Connector ® Fully assembled PCB connector is designed to mate with SBS 75G Mated Length Wire connector. Has press fit board locks to help secure the connector Back View Side View [ 74.9 ] to the PCB before and after soldering. [ 56.8 ] 2.95 [ 49.6] 2.24 [ 5.7 ] 1.95 0.62 Description ---- Part Number ---- Minimum Quantity ..... 100 ...... [ 4.0 ] [ 3.4 ] Black SBS75GPRBLK-BK [ 19.1 ] 0.16 0.13 0.75 TYP TYP See PCB connector drawing on website for further detail. - 58 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SBS 50 & 75 SECTION 3 ® SBS 50 & 75 ® SBS Silver Plated Primary Power Wire Contacts Use two silver plated contacts per housing for the best electrical performance and durability up to 10,000 mating cycles. Standard contacts are for use in all [ 7.6 ] ® primary power positions for SBS 50, 75X, & 75G wire housings. See reducing 0.30 bushings in accessory section for smaller wires. See reducing busings in accessory section for smaller wires. [ 39.4 ] 1.55 Dimensions [ 12.4 ] 0.49 Loose Piece - A - Type AWG mm² ------ Part Numbers ------ inches mm Minimum Quantity .................. 1,000 100 ................... A Standard 6 16 1339G2-BK 1339G2* 0.22 5.59 [ 7.3 ] Standard 8 10 1339G5-BK 1339G5* 0.19 4.83 Ø 0.29 Standard 12 to 10 2.5 to 6 1339G3-BK 1339G3* 0.14 3.56 * Are sold as pairs. 2 contacts ship for every 1 ordered. ® SBS 75G Silver Plated Pre-Mate Wire Contacts ® Pre-Mate contacts are for the center Pre-Mate position on the SBS 75G wire Ground Indicator housings. See reducing bushings in accessory section for smaller wires. [ 7.6 ] 0.30 Dimensions Loose Piece - A - Type AWG mm² ------ Part Numbers ------ inches mm + [ 41.9 1.5 ] - + Minimum Quantity .................. 500 50 ..................... 1.65 0.06 - [ 12.4 ] 0.49 Pre-Mate 6 16 1340G1-BK 1340G1 0.22 5.59 Pre-Mate 8 10 1340G2-BK 1340G2 0.19 4.83 Pre-Mate 12 to 10 2.5 to 6 1340G3-BK 1340G3 0.14 3.56 A [ 7.3 ] Ø 0.29 ® Pin Contacts for SBS 75X Auxiliary Gold plated contacts are available in 3 lengths to allow sequencing of circuits. Retention Clip Description AWG mm² ----------------- Part Numbers ---------------- [ 1.60 ] Minimum Quantity .................................................... 500 50 ........... Ø 0.06 ID Standard Length 7.7mm 12 2.5 PM16P12S30 PM16P12S30-50 16 to 14 1.0 to 1.5 PM16P1416S30 PM16P1416S30-50 20 to 16 0.75 to 1.0 PM16P1620S30 PM16P1620S30-50 24 to 20 0.50 to 0.75 PM16P2024S30 PM16P2024S30-50 L1 Pre-Mate 9.3mm 12 2.5 PM16P12A30 - L 16 to 14 1.0 to 1.5 PM16P1416A30 - 20 to 16 0.75 to 1.0 PM16P1620A30 - 24 to 20 0.50 to 0.75 PM16P2024A30 - Auxiliary Pin - L - - L1 - Post-Mate 6.4mm 12 2.5 PM16P12C30 - Contact Lengths in. mm in. mm 16 to 14 1.0 to 1.5 PM16P1416C30 - Standard Length 7.7mm 0.77 19.6 0.30 7.7 20 to 16 0.75 to 1.0 PM16P1620C30 - Pre-Mate 9.3mm 0.83 21.2 0.37 9.3 24 to 20 0.50 to 0.75 PM16P2024C30 - Post-Mate 6.4mm 0.72 18.3 0.25 6.4 ® Socket Contacts for SBS 75X Auxiliary Selectively gold plated contacts offer low resistance and durability up to 10,000 mating cycles. [ 19.6 ] 0.77 Description AWG mm² -------------------- Part Numbers ------------------- Minimum Quantity .................................. 500 50 ............. Socket Contact 12 2.5 PM16S12S32 PM16S12S32-50 ID 16 to 14 1.0 to 1.5 PM16S1416S32 PM16S1416S32-50 [ 2.6 ] Retention 0.10 Socket 20 to 16 0.75 to 1.0 PM16S1620S32 PM16S1620S32-50 Clip Insert 24 to 20 0.50 to 0.75 PM16S2024S32 PM16S2024S32-50 Auxiliary Socket Contacts Crimp Barrel ID Wire Gauge in. mm. #24 / 20 0.04 1.1 #20 / 16 0.07 1.7 #16 / 14 0.08 2.1 #12 0.10 2.6 - 59 - All Data Subject To Change Without Notice www.andersonpower.com ® | SBS CONNECTOR SPECIFICATIONS | Electrical Mechanical Current Rating Amperes ¹ UL 1977 CSA/TUV Wire Size Range AWG mm² Power Contacts (with bushings) 16 to 6 1.3 to 13.3 Primary Power (6 AWG) 110 75 Auxiliary Contacts 24 to 12 0.25 to 3.3 Auxiliary (12 AWG) 20 10 Max. Wire Insulation Diameter in. mm Voltage Rating AC/DC ® SBS 75G Power & Ground 0.380 9.652 UL 1977 600 ® ® SBS 50 & SBS 75X Power Contacts 0.410 10.414 ® SBS 75X Auxiliary Contacts 0.140 3.600 Dielectric Withstanding Voltage Volts AC 2,200 Operating Temperature ² °F °C Standard -4° to 221° -20° to 105° Avg. Mated Contact Resistance Milliohms ¹ Chemical Resistant -40 to 221° -40° to 105° Power & Ground: 1 1/4” of #6 AWG wire 0.200 Auxiliary: Wire & PCB 3.000 Mating Cycles No Load by Plating Silver (Ag) Tin (Sn) Gold (Au) Power & Ground Contacts Wire 10,000 UL Hot Plug Current Rating Amperes - 250 cycles at 120V DC Power & Ground Contacts PCB 1,500 Wire & PCB Power 50A Auxiliary Contacts 10,000 Wire & PCB Auxiliary 5A Avg. Mating / Unmating Force Lbf. N UL Ground Short Time Current Test - SBS75G Wire & PCB ® ® SBS 75X and SBS 75G Wire to Wire 16 70 1530 Amps, #6 AWG Wire 6 seconds ® SBS 50 Wire to Wire 8 36 ® ® SBS 75X and SBS 75G Wire to PCB 8 36 Min. Contact / Spring Retention Force Lbf. N Materials Power, Standard Housing 50 222 Housing Power, Chem. Resistant Housing 30 133 Standard Plastic Resin Polycarbonate Aux. Standard Housing 15 67 Chem. Resistant Resin Polycarbonate / PBT blend Aux. Chem. Resistant Housing 10 44 Contact Retention Spring Stainless Steel PCB Specifications Housing Flammability Rating Mounting Style Plated Through Hole UL94 V-0 Max PCB Thickness- in. [mm] 0.093 [2.4] Glow Wire - SBS50 825°C (GWFI) / 800°C (GWIT) Recommended Traces Power & Ground #6 AWG Cross Section - SBS75G 960°C (GWFI) / 800°C (GWIT) Recommended Traces Auxiliary #12 AWG Cross Section - SBS75X 960°C (GWFI) / 800°C (GWIT) Min. Creepage / Clearance Distance PCB in. mm ® Wire Power & Ground Contact Silver Plated Copper Alloy Power to Aux. Creepage SBS75X 0.41 10.4 ® Power to Aux. Clearance SBS75X 0.24 6.1 ® PCB Power & Ground Contact Tin Plated Copper Alloy Power to Ground Creepage SBS75G 0.35 8.9 ® Power to Ground Clearance SBS75G 0.26 6.7 ® SBS75X Auxiliary Contacts Auxiliary Creepage SBS75X 0.12 3.0 ® Pin Copper alloy, Au over Ni Auxiliary Clearance SBS75X 0.12 3.0 Socket BeCu, Au over Ni Socket Body Copper alloy, Sn bright over Ni Retention Clip Stainless Steel PCB Press Fit Retainers Brass - Tin Plated Contact Termination Methods Crimp ³ Wire Contacts Hand Solder Wire and PCB Contacts Solder Dip PCB Contacts Wave Solder PCB Contacts ® Auxiliary contacts are available for SBS 75X only. ® ® SBS 75X and SBS 75G PCB connectors are designed to mate only with the wire connector of the same series. NOTE 1: See IEC 60664-1 for working voltage. NOTE 2: Amp ratings are stated per position and based on all positions being fully loaded. ¹ Based on: 105°C rated or better cable of the largest size, Properly calibrated APP recommended tooling, and a 25°C ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating below a 30°C temperature rise. ² Limited by the thermal properties of the connector plastic housing. ³ Use APP recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition. - 60 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SBS 50 & 75 SECTION 3 ® SBS 50 & 75 | IEC INFORMATION | Connector Connector Creepage/Clearance Material Creepage/Clearance Material Series Series Configurations per IEC 60950-1 Group Configurations per IEC 60950-1 Group Unmated 3.33 mm Unmated 3.33 mm IIIa IIIa SBS®75G SBS®75X Mated 4.64 mm Mated 4.64 mm Connector Creepage/Clearance Material Protection Series Configurations per IEC 60950-1 Group Touch Safety with Wire Contacts & PCB Mating Interface IEC 60950 Pass Unmated 3.85 mm IEC 60529 IP20 SBS®50 IIIa Mated 4.64 mm Attributes SBS50 AMP Rating AC/DC - Power only 6 AWGg-75a, 8 AWG 65A - 10 AWG - 45A, 12 AWG -35a Power Contacts and Aux contacts ( Aux contacts at 15 A) 6 AWGg-75a, 8 AWG 60A - 10 AWG - 35A, 12 AWG -30a - Aux Contacts 12 AWG - 15A Voltage Rating AC/DC (Steady State) 600 AC/DC (Operational) - Aux Contacts NA Breaking Capacity -AMP Rating /Cycles - Power Contacts 6 AWG -50 Amp, 120 VDC / 250 Cycles Breaking Capacity - Aux Contacts NA Voltage Rating (Breaking Capacity) 120 VDC Finger Safety - Mated only IEC 60529 - IP20 Wire Size tested Power 12, 10, 8, 6 AWG Contact Series Tested 1339G2, 1339G3, 1339G5 - Aux contacts NA Climatic Testing (Cold,Heat & MFG) IEC 60512 Test -11j, 11i & 11g, Cycle Life IEC 60512 Test 9a - 5000 Cycles Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - dropped 8 times Temperature Range -20 °C to 105 °C -4 °F to 221 °F Attributes SBS75x AMP Rating AC/DC - Power only 6 AWGg-75a, 8 AWG 65A - 10 AWG - 45A, 12 AWG -35a Power Contacts and Aux contacts ( Aux contacts at 15 A) 6 AWGg-75a, 8 AWG 60A - 10 AWG - 35A, 12 AWG -30a - Aux Contacts 12 AWG - 15A Voltage Rating AC/DC (Steady State) 600V AC/DC ( Operational) - Aux Contacts 12 AWG - 15A Breaking Capacity -AMP Rating /Cycles - Power Contacts 6 AWG- 50 Amp, 120 VDC / 250 Cycles Breaking Capacity - Aux Contacts 12 AWG -5A, 120 VDC / 250 Cycles Voltage Rating (Breaking Capacity) 120 VDC Finger Safety - Mated only IEC 60529 - IP20 Wire Size tested Power 12 AWG, 10 AWG , 8 AWG, 6AWG / signal 12 awg Contact Series Tested Power 1339G2, 1339G3, 1339G5 - Aux contacts PM16P12S30, PM16S12S32 Climatic Testing (Cold,Heat & MFG) IEC 60512 Test -11j, 11i & 11g, Cycle Life IEC 60512 Test 9a - 5000 Cycles Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - dropped 8 times Temperature Range -20 °C to 105 °C -4 °F to 221 °F NOTE 3: Refer to the Constructional Data form for additional information on our website., www.andersonpower.com - 61 - All Data Subject To Change Without Notice www.andersonpower.com Attributes SBS75G AMP Rating AC/DC - Power only 110 Power Contacts and Aux contacts ( Aux contacts at 15 A) NA - Aux Contacts NA Voltage Rating AC/DC (Steady State) 600V AC/DC ( Operational) - Aux Contacts NA Breaking Capacity -AMP Rating /Cycles - Power Contacts 6 AWG- 50 A, 120 VDC / 250 Cycles Breaking Capacity - Aux Contacts NA Voltage Rating (Breaking Capacity) 120 VDC Finger Safety - Mated only IEC 60529 - IP10, IP20 Wire Size tested 6 AWG Contact Series Tested Power 1339G2, 1339G3, 1339G5 / Ground 1340G1 - Aux contacts NA Climatic Testing (Cold,Heat & MFG) IEC 60512 Test -11j, 11i & 11g, Cycle Life IEC 60512 Test 9a - 1500 Cycles Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - dropped 8 times Temperature Range -20 °C to 105 °C -4 °F to 221 °F Attributes SBS75G and GPR (PCB) AMP Rating AC/DC - Power only 110 Power Contacts and Aux contacts ( Aux contacts at 15 A) NA - Aux Contacts NA Voltage Rating AC/DC (Steady State) 600V AC/DC (Operational) - Aux Contacts NA Breaking Capacity -AMP Rating /Cycles - Power Contacts 6 AWG- 50 A,120 VDC / 250 Cycles Breaking Capacity - Aux Contacts NA Voltage Rating (Breaking Capacity) 120 VDC Finger Safety - Mated only IEC 60529 - IP20 Wire Size tested 6 AWG Contact Series Tested Power B02075P1 / Ground B02114P1 - Aux contacts NA Climatic Testing (Cold,Heat & MFG) IEC 60512 Test -11j, 11i & 11g, Cycle Life IEC 60512 Test 9a - 1500 Cycles Mechanical Strength Impact NA Temperature Range -20 °C to 105 °C -4 °F to 221 °F NOTE 3: Refer to the Constructional Data form for additional information on our website., www.andersonpower.com - 62 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SBS 50 & 75 SECTION 3 ® SBS 50 & 75 ® | SBS CONNECTOR TEMPERATURE CHARTS | Temperature rise charts are based on a 25°C ambient temperature. For Temperature Rise Above 60°C, Consult the Extended Temperature Rise Charts in the Appropriate Product Section on the Website. Current - Temperature Derating per IEC 60512-5-2 Test 5B ® ® ® SBS 75x Primary Contacts Only SBS 75x Primary Contacts Only SBS 50 Derating vs. Ambient Temperature Temperature Rise at Constant Current Temperature Rise at Constant Current 60 125.0 60 50 50 100.0 40 40 30 75.0 30 20 20 50.0 10 10 0 0 25.0 0 10 20 30 40 50 60 70 80 90 100 110 120 0 20 40 60 80 100 120 0 20 40 60 80 100 120 140 Amperes Applied Amperes Applied Amperes Applied 6 AWG 8 AWG 6 AWG 10 AWG 12 AWG 6 AWG 8 AWG 10 AWG 12 AWG 10 AWG 12 AWG ® ® ® SBS 50 SBS 75x Auxiliary Contacts @ 10A SBS 75x Auxiliary Contacts @ 10A Derating vs. Ambient Temperature Temperature Rise at Constant Current Derating vs. Ambient Temperature 60 125 125.0 50 100.0 100 40 30 75 75.0 20 50 50.0 10 0 25 25.0 0 10 20 30 40 50 60 70 80 90 100 110 0 20 40 60 80 100 120 140 0 10 20 30 40 50 60 70 80 90 100 110 Amperes Applied Amperes Applied Amperes Applied 6 AWG 8 AWG 6 AWG 8 AWG 6 AWG 10 AWG 12 AWG 10 AWG 12 AWG 10 AWG 12 AWG ® ® SBS 75x Auxiliary Contacts @ 20A SBS 75x Auxiliary Contacts @ 20A Temperature Rise at Constant Current Derating vs. Ambient Temperature 60 125.0 50 100.0 40 30 75.0 20 50.0 10 0 25.0 0 10 20 30 40 50 60 70 80 90 100 110 0 10 20 30 40 50 60 70 80 90 100110 Amperes Applied Amperes Applied 6 AWG 8 AWG 6 AWG 8 AWG 10 AWG 12 AWG 10 AWG 12 AWG - 63 - All Data Subject To Change Without Notice www.andersonpower.com Temperature Rise Temperature Rise Temperature Rise Above Ambient (°C) Above Ambient (°C) Above Ambient (°C) Ambient Temperature (°C) Ambient Temperature (°C) Ambient Temperature (°C) Ambient Temperature (°C) Temperature Rise Above Ambient (°C) For Temperature Rise Above 60°C, Consult the Extended Temperature Rise Charts in the Appropriate Product Section on the Website. ® SBS 75G Primary Contacts Only ® ® SBS 75G All Contacts Powered SBS 75GPR All Contacts Powered No Power Center Contact Temperature Rise at Constant Current Temperature Rise at Constant Current Temperature Rise at Constant Current 60 60 60 50 50 50 40 40 40 30 30 30 20 20 20 10 10 10 0 0 0 0 20 40 60 80 100 120 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 110 120 Amperes Applied Amperes Applied Amperes Applied 6 AWG 8 AWG 6 AWG 8 AWG 6 AWG 8 AWG 10 AWG 12 AWG 10 AWG 12 AWG 10 AWG 12 AWG Current - Temperature Derating per IEC 60512-5-2 Test 5B ® SBS 75G Primary Contacts Only ® ® SBS 75G All Contacts Powered SBS 75GPR All Contacts Powered No Power Center Contact Derating vs. Ambient Temperature Derating vs. Ambient Temperature Derating vs. Ambient Temperature 125 125 125 100 100 100 75 75 75 50 50 50 25 25 25 0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 0 20 40 60 80 100 120 140 Amperes Applied Amperes Applied Amperes Applied 6 AWG 8 AWG 6 AWG 8 AWG 6 AWG 8 AWG 10 AWG 12 AWG 10 AWG 12 AWG 10 AWG 12 AWG ® | SBS ACCESSORIES | ® Mounting Clamp for SBS50 [ 20.8 ] [ 20.8 ] [ 20.8 ] ® Mounting clamps can be used for fastening a SBS 50 series 0.82 0.82 0.82 [ 4.6 ] [ 1.5 ] Ø 0.18 TYP 0.06 housings to a panel. Fastening hardware not included. [ 26.4 ] 1.04 Description --- Part Number --- Minimum Quantity .......................... 20 sets of 2 ..... [ 25.1 ] [ 33.5 ] ® Panel Mount Bracket for SBS 50 1466G1 0.99 1.32 [ 28.2 ] 1.11 [ 50.0 ] 1.97 ® ® T-Handle for SBS 50 and SBS 75X The “T” handle makes mating and unmating the connector easier. The non-conductive red plastic material is strong and safe. (2) Self tapping screws are used to secure the handle to the connector housing. Description ---------- Part Numbers ---------- Minimum Quantity ............................... 1,000 50 .......... Red “T” Handle + Hardware Bag - SBS50-HDL-RED Hardware Bag (2 Screws) - 104G17 Red “T” Handle Only 113899P1 - #8 x 5/8” Screw (Order 2 Per Handle) H1120P55 - - 64 - All Data Subject To Change Without Notice www.andersonpower.com SECTION 3 ® SBS 50 & 75 Temperature Rise Ambient Temperature (°C) Above Ambient (°C) Temperature Rise Ambient Temperature (°C) Above Ambient (°C) Ambient Temperature (°C) Temperature Rise Above Ambient (°C) SECTION 3 ® SBS 50 & 75 ® ® “A” frame handle for SBS 50 and SBS 75X Handle makes mating and unmating the connector easier. The non-conductive gray plastic material is strong and safe. Machine screws and locknuts included. Screws Description - Part Number - Connector Minimum Quantity ..................... 200 ....... Handle Housing Gray “A” Handle & Hardware 997G1 Locknuts ® T-Handle for SBS75G The “T” handle makes mating and unmating the connector easier. The non-conductive red plastic material is strong and safe. (2) Machine screws and lock nuts. Description - Part Number - Minimum Quantity .............................. 50 .... Red “T” Handle + Hardware Bag SBS75GHDLRED ® Dust Cover SBS50 Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal. ® Shown with the SB 50 Description ---- Part Number ---- Minimum Quantity ............................. 500 50 ... Slide cover over Dust Cover with Lanyard Strap, Red 113890P1 134G1 mating end. ® Cable Clamps for SBS50 Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. Cable Size 5905 AWG or mm² or Description (Inches O.D.) (mm O.D.) ----- Part Numbers ----- Minimum Quantity ......................................................................................... 500 50 ... ® Shown with the SB 50 Self Attaching for Discrete Conductor 8 to 6 10 990-BK 990 Self Attaching for Discrete Conductor 12 to 10 2.5 to 4 990G2-BK 990G2 Bolt on bundled Bolt On for Discrete Conductor 12 to 6 2.5 to 10 990G1-BK 990G1 conductors. Bolt On for Bundled Conductor (0.320 to 0.450) (4.27 to 11.43) 5905-BK 5905 990 The given wire O.D. information is an estimate. Cable clamps should be evaluated for Self attaching performance with the actual wire to be used. discrete conductor. ® Cable Clamps for SBS 75X with Integral Handle Rugged chemical resistant PBT/ PC plastic cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. Cable Size AWG or mm² or Description (Inches O.D.) (mm O.D.) ------------------ Part Numbers ------------------- Minimum Quantity ..................................................................................................... 100 25 ....... Large Wire Clamp Kit w/ Hardware 12 to 6 (0.39 to 0.60) 4 to 10 (9.9 to 15.2) PSBS75XCLP1-BK PSBS75XCLP1 Small Wire Clamp Kit w/ Hardware 12 to 6 (0.34 to 0.55) 4 to 10 (8.6 to 14.0) PSBS75XCLP2-BK PSBS75XCLP2 [ 21.8 ] [ 36.4 ] 0.86 1.44 The given wire O.D. information is an estimate. Cable clamps should [ 45.9 ] [ 48.3 ] [ 55.5 ] be evaluated for performance with 1.81 1.90 2.18 the actual wire to be used. Clamp hardware requires phillips or flat blade screwdriver to assemble. - 65 - All Data Subject To Change Without Notice www.andersonpower.com Reducing Bushings Use with contact part number 1339G2-BK or 1340G1-BK to allow a smaller wire to be used with the connector. Electrical capability is derated with smaller wire. Dimensions - ID - - Length - Contact Barrel Size Wire Size -------- Part Numbers -------- inches mm inches mm Minimum Quantity ...................................................... 3,000 1,000 100 ..................................................... ID Length #6 AWG [13.3 mm²] #8 AWG [8.4 mm²] - 5912-BK 5912 0.18 4.57 0.45 11.43 #6 AWG [13.3 mm²] #12- 10 AWG [3.3- 5.3 mm²] 5910-BK - 5910 0.14 3.56 0.47 11.94 #6 AWG [13.3 mm²] #16- 14 AWG [1.3- 2.1 mm²] 5913-BK - 5913 0.09 2.29 0.47 11.94 Wire Entrance ® SBS - Tooling Information Wire Size Power / Ground Contacts Power Contact Pneumatic Bench Number of AWG mm² Part Number Tool Die Locator Crimps Hand Tool #6 13.3 1339G2 1388G6 #8 1389G9 8.4 1339G5 #10 / 12 5.3 / 3.3 1388G7 1339G3 1387G1 Single 1309G4 #6 13.3 1340G1 1388G6 1389G20 #8 8.4 1340G2 1388G7 #10 / 12 5.3 / 3.3 1340G3 ® Wire Size SBS 75X Auxiliary Contacts Mil Std. Hand Locator for: Auxiliary Contact APP Hand Tool w/ Tool* Pneumatic Number TM0001 & of Crimps AWG mm² Part Number Integral Locator M22520/1-01 Tool* TP0001 TL0001 All Crimp Pins #12 / 24 2.5 / 0.25 PM1000G1 TM0001 TP0001 Single TL0002 All Crimp Sockets * TP0001 and TM0001 tools require locators TL0001 for Pins and TL0002 for Sockets. NOTE: See website for the most current information. ® SBS 75X Auxiliary Contact Insertion Tool: PM1002G1 ® SBS 75X Auxiliary Contact Extraction Tool: PM1003G1 ® SBS 75X Auxiliary Contact Insertion Inspection Tool: PM1003GX The auxiliary contacts used with wire sizes #16 - #24 AWG cannot be properly inserted without the insertion tool. Properly installed auxiliary contact of al wire gauges cannot be removed from the hosing without the extraction tool. - 66 - All Data Subject To Change Without Notice www.andersonpower.com 2018-0054 DS-SBS REV C6 SECTION 3 ® SBS 50 & 75