POWER ADQ600 Series Data Sheet 600 Watts Total Power: 600 Watts Input Voltage: 40 - 60 V # of Outputs: Single SPECIAL FEATURES ƒ Delivering up to 50 A output ƒ Ultra-high efficiency 95.6% typical at full load ƒ Wide input range: 40 V - 60 V Electrical Specifications ƒ Excellent thermal performance Input ƒ No minimum load requirement ƒ Basic isolation Input voltage (continuous) 63 V Input voltage (non-continuous) 80 V 100 mSec ƒ High power density ƒ Low output noise Input over voltage protection 63 Vdc ƒ RoHS 6 compliantInput ra nge 40 - 60 VDC ƒ Remote control function Efficiency 95.6% @ 12Vo (negative logic) Output ƒ Input under voltage lockout Output voltage 12 V ƒ Output over current protection Output current 50 A ƒ Output over voltage protection Voltage tolerance +/-1% ƒ Over temperature protection Line regulation 0.1% ƒ Industry standard quarter-brick Load regulation 3.3% pinout outline Noise/ripple 200 mV ƒ Open-frame and baseplated Over voltage protection Hiccup at between 13.6 V and 16 V ƒ Pin length option: 3.8 mm Over temperature protection Auto-restart Switching frequency 175 KHz SAFETY Temperature coefficient ±0.02/°C ƒ UL, cUL: UL60950 Isolation ƒ TUV/CE: IEC/EN60950 I/O isolation 1500 VDC min. ADQ600 Series Data Sheet Environmental Specifications Operating ambient temperature range -40° C to +85 °C Storage temperature -55 °C to +125 °C Humidity 5% to 95% (non-condensing) MTBF 1.5 Million hours RoHS Compliant Ordering Information Model number Input voltage Output voltage Power ADQ600-48S12-6L 40 - 60 V 12 V @ 50 A 600 W ADQ600-48S12B-6L 40 - 60 V 12 V @ 50 A 600 W - Standard version is negative enable - “-6” = 3.8 mm pin length - “-L” = RoHS 6 compliance - “B” = Baseplate Mechanical Drawings Open Frame Module: Baseplate Module: ADQ600 Series Data Sheet Pin Assignments Pin # Function 1 +Vin 2 Remote On/Off 3 -Vin 4 -Vout 5 +Vout Notes: 1. All specifications are subject to change without notice. Mechanical drawings are for reference only. 2. Warranty: 2 years 3. Label and logo appearance may vary from what is shown on mechanical drawings. WORLDWIDE OFFICES Asia (HK) Americas Europe (UK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park 2 Wing Yip Street Tempe, AZ 85282 Merry Hill, Dudley Kwun Tong, Kowloon USA West Midlands, DY5 1LX Hong Kong +1 888 412 7832 United Kingdom www.artesyn.com +852 2176 3333 +44 (0) 1384 842 211 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use For support: productsupport.ep@artesyn.com of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. ADQ600 DS 24Mar2015