POWER AIF Series Data Sheet 600 Watts Total Power: 600 Watts (12 V @ 50 A) Input Voltage: 300 V # of Outputs: Single SPECIAL FEATURES ƒ 600 W continuous power at 100 °C baseplate temperature 3 3 ƒ 108 W/in (6.6 W/cm ) Electrical Specifications ƒ High efficiency - up to 90% Input ƒ Low output ripple and noise Input range 250 - 420 Vdc ƒ Positive and Negative enable Input surge 450 V / 100 ms function Efficiency 90% @ 5.0 V (Typical) ƒ Excellent transient response ™ ƒ OVP, OCP, V Adj control with ALP Output analog mode linear control, or Load regulation 0.2% typical down to no load 2 through I C bus with digital mode Line regulation 0.2% typical control Noise ripple 100 mV typical (below 5 V); 2% typical (5 V and above) ƒ Paralleable with accurate current sharing Remote sense Up to 0.5 V ƒ EU Directive 2002/95/EC compliant Output voltage adjust range +/-20% for 5V and above; +10%/-50% for below 5 V for RoHS Transient response 5% max for 3.3 V and above, 150 mV for 1.8V , deviation with 25% ƒ Two year warranty to 75% full load 250 μS (max) recovery Current share accuracy 3% typical SAFETY Overvoltage protection 115% Vo (nominal) ƒ UL 60950 Recognized Current limit 115% Io maximum ƒ cUL 60950 Recognized Control ƒ TUV EN60950 Licensed Voltage adjust 80 to 120% Vo linear programming for 12 V, 15 V, 24 V, 48 V 50% ƒ CE CE Mark to 110% for 1.8 V - 5.0 V Enable TTL compatible (positive & negative enable options) Current limit adjust 20 to 100% Io linear programming or digital mode control Clock input (external sync) 3.3 to 5.5 Vp-p @ 800 KHz ±10% Clock output (internal clock) 4.5 Vp-p typical@ 800 KHz ±5% Power good identification High (Vo) = power good Temperature monitor output 10 mV/°K (2.73 = 0°C) Current monitor output 0 to 1 mA (1 mA = 100% Io rated) Overvoltage protection 110 to 150% Vo linear programming by voltage or resistor, adjust or digital mode control Notes: Nominal values apply with sense pins connected and other control pin unconnected. ALP: Astec Linear Programming AIF Series Data Sheet Environmental Specifications Operating temperature -20 °C to +100 °C (case temperature) Start up temperature -40 °C to +100 °C (case temperature) Storage temperature -40 °C to +125 °C Overtemperature protection 110 °C max Ordering Information Input Voltage Output Voltage Efficiency Model Number 300 V 1.8 V @ 120 A 80% (Typ) AIF120Y300 300 V 3.3 V @ 120 A 87% (Typ) AIF120F300 300 V 90% (Typ) 5.0 V @ 80 A AIF80A300 300 V 12 V @ 50 A 90% (Typ) AIF50B300 300 V 15 V @ 40 A 90% (Typ) AIF40C300 300 V 24 V @ 25 A 90% (Typ) AIF25H300 1. For Negative enable, add suffix “-N”. 2. For Non-thread hole, add suffix “-NT”. 3. For RoHS 6, add suffix “-L”. Default is RoHS 5. Pin Assignments Input (AC) Output (DC) Control Pins 31. Positive 21. Positive 1. +Sense 32. Negative 22. Positive 2. Temp Mon 23. Positive 3. C Mon 24. Positive 4. C Share 25. Negative 5. Clk Out 26. Negative 6. Clk In 27. Negative 7. PG/ID 28. Negative 8. C Lim Adj 9. OVP Adj 10. V Adj 11. Enable 12. -Sense AIF Series Data Sheet Mechanical Drawings WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Waterfront Business Park 14/F, Lu Plaza Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street USA West Midlands, DY5 1LX Kwun Tong, Kowloon +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are For more information: www.artesyn.com/power trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos For support: productsupport.ep@artesyn.com referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. © 2017 AIF Series-DS 08May2017 Artesyn Embedded Technologies, Inc.