POWER AVO100-48S28B-6L Data Sheet 100 Watts Total Power: 100 Watts Input Voltage: 36 - 75 V # of Outputs: Single Special featureS ƒ Delivers up to 3.57 A output current ƒ Ultra-high efficiency 92% typ. at full load ƒ Excellent thermal performance Electrical Specifications ƒ No minimum load requirement Input specification ƒ Basic isolation Input range 36 Vdc to 75 Vdc ƒ High power density Input surge 100 V for 100 mSec ƒ Low output noise Efficiency 92% ƒ Reflow soldering enabled Control specification ƒ RoHS 6 compliant Enable TTL compatible positive or negative enable Safety Output specification Output voltage 28 Vdc ƒ UL, cUL: UL60950 Trim range -64% - +116% ƒ TUV/CE: IEC/EN60950 Output current 3.57 A Ripple and noise 30 mV pk-pk nom 200 mV max. pk-pk Regulation (total error band) +/-2% Vout Over current protection 6.4 A max. Typ Over voltage protection 130% Vout nominal Over temp protection 120 deg °C Switching frequency Fixed to 280 kHz Isolation voltage 1500 Vdc Transient response 130 mV deviation, 100 mSec recovery. 25%-50%-25% load 0.1A/uSec UVLO Turn-on 34 Vdc Typical UVLO Turn-off 32 Vdc Typical Environmental Specifications Operating ambient temperature range: -40 °C to +85 °C Storage temperature: -55 °C to +125 °C Humidity: 5% to 95% (non-condensing) MTBF: 1.5 Million hours RoHS Compliant RoHS 6 compliant AVO100-48S28B-6L Data Sheet Ordering Information Model number Description AVO100-48S28P-6L 3.8 mm pin length; positive on/off logic; open frame; R6 compliant AVO100-48S28-6L 3.8 mm pin length; negative on/off logic; open frame; R6 compliant AVO100-48S28BP-6L 3.8mm pin length; positive on/off logic; baseplate; R6 compliant AVO100-48S28B-6L 3.8mm pin length; negative on/off logic; baseplate; R6 compliant Mechanical Drawings Pin Length Option Device code suffix L -4 4.8 mm ± 0.25 mm -6 3.8 mm ± 0.25 mm -8 2.8 mm ± 0.25 mm None 5.8 mm ± 0.25 mm AVO100-48S28B-6L Data Sheet Mechanical Drawings Pin Designations (AVO100-48S28B-6L) Pin No. Name Function 1 V + Positive input terminal in 2 Remote ON/OFF ON/OFF control terminal 3 V - Negative intput terminal in 4 V - Negative output terminal o 5 S- Negative remote sense 6 Trim Output voltage trim 7 S+ Positive remote sense 8 V + Positive output terminal o Notes: 1. All specifications are subject to change without notice. Mechanical drawings are for reference only. 2. Warranty: 2 years 3. Label and logo appearance may vary from what is shown on mechanical drawings. WORLDWIDE OFFICES asia (HK) americas europe (uK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park 2 Wing Yip Street Tempe, AZ 85282 Merry Hill, Dudley Kwun Tong, Kowloon USA West Midlands, DY5 1LX Hong Kong +1 888 412 7832 United Kingdom www.artesyn.com +852 2176 3333 +44 (0) 1384 842 211 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use For support: productsupport.ep@artesyn.com of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. AVO100-48S28B-6L DS Rev. 09.19.14