POWER BXB Series Data Sheet 66 - 100 Watts Total Power: 66 - 100 W Input Voltage: 18 - 36 V 36 - 75 V # of Outputs: Single SPECIAL FEATURES ƒ Industry standard footprint 3 ƒ High power density (36.5 W/in ) ƒ MTBF >1.4 million hours (Bellcore 332) ƒ Input voltage to ETS300-132-2 ƒ Adjustable output voltage ƒ No minimum load required Electric ƒ Separate case ground pin Input ƒ Undervoltage lockout (UVLO) Input voltage range 24 Vin nominal 18 - 36 Vdc ƒ UL, VDE and CSA safety approvals 48 Vin nominal 36 - 75 Vdc ƒ Two year warranty Input current No load 100 mA max. Remote OFF 20 mA max. Input current (max.) (See Note 4) 48 V models 4 A max. @ Io max. SAFETY and Vin = 0 - 75 V ƒ VDE0805/EN60950/IEC950 Input reflected ripple (See Note 6) 5 mA pk-pk ƒ UL1950 Active low remote ON/OFF Logic compatibility Open collector ref to -input ƒ CSA C22.2 No. 950 (See Note 7) ON 1.2 Vdc max. OFF Open circuit Undervoltage lockout 24 Vin: power up 17 V 24 Vin: power down 16 V 48 Vin: power up 34 V 48 Vin: power down 32.5 V Start-up time Power up 20 ms (See Note 8) Remote ON/OFF 20 ms Output Voltage adjustability 60% to 110% Setpoint accuracy ±1.0% Line regulation Low line to high line ±0.5% Load regulation Full load to min. load ±0.10% Minimum load 0% Overshoot At turn on and turn off None Undershoot None Ripple and noise 3.3 V and 5 V 75 mV pk-pk, 20 mV rms 5 Hz - 20 MHz (See Note 1) 2 V and 15 V 100 mV pk-pk, 30 mV rms Temperature co-efficient ±0.01% / °C Transient response (See Note 2) ±2.0% max. deviation; 170 µs recovery to within ±1.0% Remote sense 0.5 Vds transmission line drop compensation BXB100 Series Data Sheet General Specifications Environmental Specifications Efficiency (See Efficiency Table) Thermal performance Operating case temperature -40 °C to +85 °C Non-operating temperature -55 °C to +125 °C Insulation voltage Input/Case 1500 Vdc Altitude Operating 10,000 feet max. Input/Output 1500 Vdc Non-operating 40,000 feet max. Output/Case 1500 Vdc Vibration 5 - 500 Hz 2.4 G rms (approx.) Switching frequency Fixed 500 kHz typ. Approvals and VDE0805, EN60950, IEC950 standards (See Note 5) UL1950, CSA C22.2 No. 950 Protection Case material Aluminum baseplate with plastic case Short-circuit Continuous, automatic recovery Material flammability UL94V-0 Overvoltage Non-latching Weight 110 g (3.88 oz) Undervoltage Non-latching MTBF Bellcore 332 1,400,000 hours Thermal 100 °C baseplate, automatic recovery MIL-HDBK-217F @ 580,000 hours min. 40 °C C, 100% loaded Telecom Specifications EMC Characteristics Central office ETS300-132-2 Conducted emissions EN55022 (See Note 3) Level A interface A (See Note 3) FCC part 15 Level A EN55022, CISPR22 Level A Ordering Information Regulation Model Output Power Input Output Current Output Current Efficiency Number (Max.) Voltage OVP Output Voltage (Min) (Max) (Typical) Line Load BXB100-24S12FLTJ 100 W 18 - 36 Vdc 14.5 Vdc 12 V 0 A 8.33 A 85% ±0.05% ±0.1% BXB100-48S05FLTJ 100 W 36 - 75 Vdc 6.5 Vdc 5 V 0 A 20 A 83% ±0.05% ±0.1% BXB100-48S12FLTJ 100 W 36 - 75 Vdc 14.5 Vdc 12 V 0 A 8.33 A 86% ±0.05% ±0.1% Notes: External Output Trimming 1. Measured with 10 μF tantalum capacitor and 1 μF ceramic capacitor across output. Output can be externally trimmed by using the method shown. 2. di/dt = 0.1 A/1 μs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 Io max. to 0.5 Io max. 3. Units should be characterised within systems. External components required. 8 4. Input fusing is recommended based on surge current and maximum input current. 5. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6. Simulated source impedance of 12 μH. 12 μH inductor in series with +Vin. 7. Active high remote on/off option is available (standard product is active low), designate with the TRIM suffix ‘FHT’ e.g. BXB100-48S05FHTJ. Consult factory for further details and options. 8. Start-up into resistive load. UP 9 . “J” suffix designation for RoHS 6/6. RT1 7 OR RT2 TRIM DOWN 6 BXB100 Series Data Sheet Mechanical Dimensions VIEW SHOWN PIN SIDE UP 0.200 (5.08) Min. Length for all Input and Output Pins 1.90 0.190 (4.83) 0.010 (0.25) (48.26) 0.500 (12.69) 0.010 (0.25) 1.000 (25.40) 0.700 (17.77) 2.40 (60.96) 2.000 (50.80) 0.400 (10.16) 1.000 (25.40) Max. 0.400 (10.16) 1.400 (35.56) 1.400 (35.56) 7 x Ø.040 (1.02) 0.002 (0.05) 0.190 (4.83) 0.010 (0.25) 2 x Ø.080 (2.03) 0.002 (0.05) 2.28 (57.91) Max. 0.500 (12.70) 4 x M3 x 0.5 Through ALL DIMENSIONS IN INCHES (mm) Tolerance : x.xx 0.02in. (0.51mm) x.xxx 0.010in. (0.254mm) Pin Connections Pin Function 1 +Vin 2 Remote ON/OFF 3 Case 4 -Vin 5 -Vout 6 -Sense 7 Trim 8 +Sense 9 +Vout WORLDWIDE OFFICES Asia (HK) Americas Europe (UK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park 2 Wing Yip Street Tempe, AZ 85282 Merry Hill, Dudley Kwun Tong, Kowloon USA West Midlands, DY5 1LX Hong Kong +1 888 412 7832 United Kingdom www.artesyn.com +852 2176 3333 +44 (0) 1384 842 211 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use For support: productsupport.ep@artesyn.com of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. BXB100 08Jul2015 VI(+) ON/OFF CASE VI (-) Vo(+) +SEN TRIM -SEN Vo (-)