process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.03.22.07 exb30s 1 of 4 652 EXB30 Series Single output Total Power: 16-30W Input Voltage: 36-75VDC # of Outputs: Single The EXB30 is a new high efficiency open frame isolated 30 Watt Special Features • High efficiency topology, converter series in an industry standard footprint. The first five 92% typical at 5 V models in the series feature a 2:1 input voltage range of 36 Vdc • Industry standard footprint • Wide operating temperature, to 75 Vdc and are available in output voltages of 12 V, 5 V, 3.3 V, -40 °C to +85 °C 2.5 V and 2 V. Each model is trimmable from 80% to 110% except (natural convection) • 80% to 110% output trim the 12 V output which has a wider trim range of 60% to 110%. • No minimum load • Overvoltage and The sub 5 V models have an output current rating of 8 A. Typical overtemperature protection efficiencies for the models are 92% for the 5 V, 90% for the 3.3 V • Remote sense compensation • Remote ON/OFF and 12V, 87% for the 2.5 V and 86% for the 2 V version. The EXB30 • Available RoHS compliant series offers remote ON/OFF and remote sense compensation to • 2 year warranty correct for voltage drops at the load. Overcurrent, overvoltage and overtemperature protection features are included as standard. With full international safety approval including EN60950 and cUL1950, the EXB30 reduces compliance costs and time to market. process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.03.22.07 exb30s Specifications 2 of 4 652 All specifications are typical at nominal input, full load at 25°C unless otherwise stated. OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability 80% to 110% Conducted emissions EN55022 (See Note 3) Level A EN55022 (See Note 3) Level B Set point accuracy ±1.5% max. Radiated emissions EN55022 (See App. Note 108) Level B Immunity: Line regulation Low line to high line 0.1% max. ESD air EN61000-4-2 8 kV (NP), 15 kV (RP) ESD contact EN61000-4-2 6 kV (NP), 8 kV (RP) Load regulation Full load to min. load 0.2% max. Radiated field enclosure EN61000-4-3 10 V/m (NP) Total error band ±3.0% Conducted (DC power) EN61000-4-6 10 V (NP) Conducted (signal) EN61000-4-6 10 V (NP) Minimum load 0% Input transients ETS 300 132-2, ETR 283 Overshoot At turn-on and turn-off None GENERAL SPECIFICATIONS Undershoot None Efficiency See table Ripple and noise 5 Hz to 20 MHz 150 mV pk-pk Basic insulation Input/output 1500 Vdc (See Note 1) 20 mV rms Switching frequency Fixed 300 kHz typ. Temperature coefficient ±0.02%/°C Approvals and VDE0805, EN60950 Transient response 2.0% max. deviation standards IEC950, UL/cUL1950 (See Note 2) 300 µs recovery to (See Note 5) CSA C22.2 No. 950 within total error band Material flammability UL94V-0 Remote sense 10% output voltage change Weight 40 g (1.41 oz) INPUT SPECIFICATIONS MTBF MIL-HDBK-217F >300,000 hours @ 25 °C, 100% load Input voltage range 48 Vin nominal 36-75 Vdc ground benign Input current No load 50 mA max. ENVIRONMENTAL SPECIFICATIONS Remote OFF 10 mA max. Input current (max.) 48 V models 1.0 A max. @ Io max. Thermal performance Operating ambient -40 °C to +85 °C (See Note 4) and Vin = 36-75 Vdc temperature Non-operating -40 °C to +125 °C Input reflected ripple (See Note 6) 30 mA (pk-pk) typ. ETS 300 019-2-3 Classes T3.1 to T3.5 Active high remote ON/OFF Logic compatibility Open collector ref to -input Altitude Operating 10,000 feet max. ON Open circuit or >2 Vdc Non-operating 40,000 feet max. OFF <1.2 Vdc Undervoltage lockout 48 Vin: power up 34 V 48 Vin: power down 31.5 V Start-up time Power up 30 ms (See Note 7) Remote ON/OFF 30 ms process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.03.22.07 exb30s Specifications Contd. 3 of 4 652 OUTPUT OUTPUT OUTPUT INPUT OUTPUT EFFICIENCY MODEL REGULATION (8,9) POWER OVP CURRENT CURRENT VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 16 W 36-75 Vdc 2.3 Vdc 2 V 0 A 8 A 86% ±0.1% ±0.2% EXB30-48S2V0J (EOL) 20 W 36-75 Vdc 2.9 Vdc 2.5 V 0 A 8 A 87% ±0.1% ±0.2% EXB30-48S2V5J 26.4 W 36-75 Vdc 3.8 Vdc 3.3 V 0 A 8 A 90% ±0.1% ±0.2% EXB30-48S3V3J 30 W 36-75 Vdc 5.65 Vdc 5 V 0 A 6 A 92% ±0.1% ±0.2% EXB30-48S05J 30 W 36-75 Vdc 14.2 Vdc 12 V 0 A 2.5 A 90% ±0.1% ±0.2% EXB30-48S12J Notes OPEN-FRAME HEIGHT 1 Measured as per recommended set-up. 2 di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 3 The EXB30 meets level A and level B conducted emissions only with external components connected before the input pins to the converter. Full details are given in Application Note 108 on the website. ø0.040 ±0.002 4 Recommended input fusing is a 2 A HRC 200 V rated fuse. (ø1.02 ± 0.05) 5 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6 Simulated source impedance of 12 µH. 12 µH inductor in series with +Vin. STAND-OFFS 4 PLACES 7 Start-up into resistive load. 8 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 1 9 9 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http:// 8 www.artesyn.com/powergroup/products.htm to find a suitable alternative. BOTTOM VIEW 7 3 6 PROTECTION 4 5 Short circuit Continuous Overvoltage Non-latching clamp 1.90 Thermal 125 °C hot spot temperature with (48.26) 0.19 automatic recovery (4.83) 2.28 ±0.02 (57.91 ±0.5) TELECOM SPECIFICATION ALL DIMENSIONS IN INCHES (mm) PIN CONNECTIONS  Central office interface A ETS300-132-2, input voltage General Tolerance ±0.010 (0.25) and current requirements PIN NUMBER (unless otherwise specified) FUNCTION 1 - Vin CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. 2 No Pin 3 Remote ON/OFF EXTERNAL OUTPUT TRIMMING 4 + Vin All models can be externally trimmed by using the method shown below. 5 + Vout 6 + Sense + Sense 7 Trim TRIM UP 8 - Sense RT1 Trim or 9 - Vout RT2 TRIM DOWN - Sense 2.00 (50.80) 1.40 (35.56) 0.20 (5.08) 1.00  0.43 ±0.02 (25.40) (10.90 ±0.5) 0.50 0.02 (12.70) (0.50)   0.40 0.138 ±0.02 (10.16) (3.50±0.5) 0.70 (17.78) 1.00 (25.40) 1.40 (35.56) 2.40 ±0.02 (60.96 ±0.5) process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.03.22.07 exb30s 652 4 of 4 Artesyn 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 13-15, Shing Wan Road Tai Wai, Shatin, N. T. Hong Kong Telephone: +852 2699 2868 Facsimile: +852 2699 1770 For global contact, visit: www.artesyn.com technicalsupport@artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.