POWER LDO06C Series Data Sheet 30 Watts Total Power: 30 Watts Input Voltage: 3 - 13.8 Vdc # of Outputs: Single SPECIAL FEATURES ƒ 6 A output current rating ƒ Input voltage range: 3 - 13.8 Vdc ƒ Adjustable output voltage: 0.59 - 5.1 V ƒ Optional factory setting with power good Electrical Specifications ƒ Excellent transient response Input ƒ Power enable Input voltage ra nge 3 - 13.8 Vdc ƒ Minimum airflow Input current Minimum load 50 mA Remote OFF 5 mA ƒ Small package Input current (max.) See Note 3 6 A @ lo max. ƒ Termination voltage capability Start-up time Power up 3 ms ƒ RoHS compliant Remote ON/OFF 2 ms Output SAFETY Output voltage See Note 5 0.59 - 5.1 V ƒ UL, cUL 60950-1 Output setpoint accuracy 0.1% trim resistors ±1.0% ƒ TÜV Product Service (EN60950) Line regulation Low line to high line ±0.2% ƒ CE Load regulation Full load to min. load ±0.5% Min./max. load 0 A/6 A Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. Ripple and noise See Note 1 20 mV 5 Hz to 20 MHz Vin = 5 V, Vout = 2.5 V Transient response See Note 1, 2 130 mV max. deviation 15 μs recovery to within regulation band General Efficiency (high input) Vin = 5 V, Vo = 2.5 V, lo = 6 A 92% Switching frequency Fixed 760 kHz Material flammability UL94V-0 Weight 1.899 g (0.067 oz.) MTBF 12 V @ 40 °C, 100% load 8,222,210 hours Bellcore 332 Coplanarity Surface mount models 150 μm LDO06C Series Data Sheet Environmental Specifications Thermal performance Operating ambient temperature -40 °C to +85 °C See Note 5 Non-operating ambient temperature -40 °C to +125 °C Protection Short-circuit Hiccup, non-latching Overvoltage protection Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 μF Output See Note 7 0 μF Ordering Information Regulation Model Output Power Input Output Output Current Output Current Efficiency (3,5) Number (Max.) Voltage Voltage (Min.) (Max.) (Typical) Line Load LDO06C-005W05-VJ 30 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 6 A 92% ±0.2% ±0.5% LDO06C-005W05-HJ 30 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 6 A 92% ±0.2% ±0.5% LDO06C-005W05-SJ 30 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 6 A 92% ±0.2% ±0.5% Part Number System with Options Product Family Rated Output Performance Input Voltage Number of Pins Output Voltage Mounting Option Custom Option RoHS Compliance Current Type of Output LDO 06 C 00 5W 05 V X J Product Family Rated Output Performance Input Voltage Type of Output Output Voltage Mounting Option Custom Option RoHS Compliance LDO = LDO Series Current C = Cost 00 = 3 - 13.8 V 5 W = 5 Pins and 05 = 0.59 - 5.1 V V = Vertical J = Pb free (RoHS 06 = 6 Amp Optimized Wide Output H = Horizontal 6/6 compliant) S = Horizontal SMT VS = Vertical SMT Notes: Output Voltage Adjustment of the 1. Measured as per recommended system capacitance. See Technical Reference Note. LDO06C Series 2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo to full lo and full lo to 0.50. 3. External input fusing is recommended. The ultra-wide output voltage trim range offers major advantages to users who select the LDO06C series. It is no longer necessary to purchase a 4. Additional part numbers may be available with different output voltages. variety of modules in order to cover different output voltages. The output 5. Airflow dependent, 100 LFM minimum required. voltage can be trimmed in a range of 0.59 - 5.1 Vdc. When the LDO06C 6. No capacitors needed for ripple current stability. converter leaves the factory, the output has been adjusted to the default voltage of 0.59 V. 7. No capacitors needed for stability. 8. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line model number search tool at http://www.Artesyn.com/power to find a suitable alternative. LDO06C Series Data Sheet Mechanical Drawings Vertical Mount Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.371 (9.42) 0.062 (1.547) 0.410 (10.41) 0.055 (1.40) 0.650 (16.51) PIN 5 PIN 1 0.16 ±0.010 (4 ±0.25) 0.050 (1.27) TYP 0.071 (1.80) 0.025 (0.64) ±.001 SQ PINS TYP 4X 0.067 (1.70) Horizontal Mount 0.062 (1.57) REF 0.443 (11.25) 0.025 (0.64) ±.001 0.410 (10.41) 6 SQ PINS TYP 0.650 (16.51) 0.580 (14.73) PIN 1 0.055 (1.40) REF 0.035 (0.89) 0.120 (3.05) TYP PIN5 0.125 (3.18) TYP 0.000 (0) 0.050 (1.27) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) LDO06C Series Data Sheet Mechanical Drawings Mating Connectors Surface Mount 0.441 (11.20) 0.062 (1.57) REF PIN 7 0.410 (10.41) PIN 6 0.650 (16.51) LDO06C- 005W05- 0.580 (14.73) 0.040 (1.02) REF PIN 5 PIN 1 0.055 (1.40) REF 0.025 (0.64) REF 0.035 (0.89) REF 0.125 (3.18) TYP Pin Assignments Single Output 1 Enable 2 Vin 3 Common/RTN 4 Vout 5 PG/Trim 6 Mech Pin (Horz/SMT only) 7 Mech Pin (Horz/SMT only WORLDWIDE OFFICES Asia (HK) Americas Europe (UK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park 2 Wing Yip Street Tempe, AZ 85282 Merry Hill, Dudley Kwun Tong, Kowloon USA West Midlands, DY5 1LX Hong Kong +1 888 412 7832 United Kingdom www.artesyn.com +852 2176 3333 +44 (0) 1384 842 211 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use For support: productsupport.ep@artesyn.com of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. LDO06C DS 27Mar2015 0 (0.00) 0.050 (1.27) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) 0.360 (9.14)