POWER LDO10C Series Data Sheet 50 Watts Total Power: 50 Watts Input Voltage: 3 - 13.8 Vdc # of Outputs: Single SPECIAL FEATURES ƒ 10 A output current rating ƒ Input voltage range: 3 - 13.8 Vdc ƒ Adjustable output voltage: 0.59 - 5.1 V ƒ Excellent transient response Electrical Specifications ƒ Power enable (5-pin model) ƒ Minimum airflow Input ƒ Small package Input voltage ra nge 3 - 13.8 Vdc ƒ Termination voltage capability Input current Minimum load 50 mA Remote OFF 5 mA ƒ RoHS compliant Input current (max.) See Note 3 10 A @ lo max. Start-up time Power up 3 ms SAFETY Remote ON/OFF 2 ms ƒ UL, cUL 60950-1 Output ƒ TÜV Product Service (EN60950) Output voltage See Note 5 0.59 - 5.1 V ƒ CE Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min./max. load 0 A/10 A Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. Ripple and noise See Note 1 20 mV 5 Hz to 20 MHz Vin = 5 V, Vout = 2.5 V Transient response See Note 1, 2 130 mV max. deviation 15 μs recovery to within regulation band General Efficiency (high input) Vin = 5 V, Vo = 2.5 V, lo = 6 A 91% Switching frequency Fixed 620 kHz Material flammability UL94V-0 Weight 1.899 g (0.067 oz.) MTBF 12 V @ 40 °C, 100% load >8,222,210 hours Bellcore 332 Coplanarity Surface mount models 150 μm LDO10C Series Data Sheet Environmental Specifications Thermal performance Operating ambient temperature -40 °C to +85 °C See Note 5 Non-operating ambient temperature -40 °C to +125 °C Protection Short-circuit Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 μF Output See Note 7 0 μF Ordering Information Regulation Model Output Power Input Output Output Current Output Current Efficiency (3,5) Number (Max.) Voltage Voltage (Min.) (Max.) (Typical) Line Load LDO10C-005W05-VJ 50 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 10 A 94% ±0.2% ±0.5% LDO10C-005W05-V1J 50 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 10 A 94% ±0.2% ±0.5% LDO10C-005W05-HJ 50 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 10 A 94% ±0.2% ±0.5% LDO10C-005W05-SJ 50 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 10 A 94% ±0.2% ±0.5% Part Number System with Options Product Family Rated Output Performance Input Voltage Number of Pins Output Voltage Mounting Option Custom Option RoHS Compliance Current Type of Output LDO 10 C 00 5W 05 V 1 J Product Family Rated Output Performance Input Voltage Type of Output Output Voltage Mounting Option Custom Option RoHS Compliance 1 = Vertical, LDO = LDO Series Current C = Cost 00 = 3 - 13.8 V 5 W = 5 Pins and 05 = 0.59 - 5.1 V V = Vertical J = Pb free (RoHS 0.199” pin 10 = 10 Amp Optimized Wide H = Horizontal 6/6 compliant) Output S = SMT length V Output Voltage Adjustment of the 4 out Remote O N/O FF 1 LDO10C Series The ultra-wide output voltage trim range offers major advantages to users LD O10C who select the LDO10C series. It is no longer necessary to purchase a R variety of modules in order to cover different output voltages. The output V n i L C 2 out voltage can be trimmed in a range of 0.59 - 5.1 Vdc. When the LDO10C 3 5 O converter leaves the factory, the output has been adjusted to the default A D voltage of 0.59 V. C n i R m t r i f ( orm t r i Notes: dow n) 1. Measured as per recommended system capacitance. See Application Note 186. G ND 2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo to full lo and full lo to 0.50. Standard Application Drawing 3. External input fusing is recommended. 4. Additional part numbers may be available with different output voltages. 5. Airflow dependent, 100 LFM minimum required. 6. No capacitors needed for ripple current stability. 7. No capacitors needed for stability. 8. NOTICE: the input voltage must be greater than the programmed output voltage. The max duty cycle is 95%. These non-isolated dc-dc modules are buck converters. LDO10C Series Data Sheet Mechanical Drawings Vertical Mount (Model LDO10C-005W05-VJ) Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) Pin Assignments .410 .460 MAX Pin No. Function .055 REF 1 Enable .062 REF 2 Vin .030 3 Common/RTN 4 Vout 5 Trim .650 .34 5 1 .131 .160±.010 .071 .050 .025 .001 4X .067 TYP SQ PINS TYP Vertical Mount (Model LDO10C-005W05-V1J) Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) Pin Assignments .410 .460 MAX .055 REF Pin No. Function .062 REF 1 Enable 2 Vin .030 3 Common/RTN 4 Vout .650 5 Trim .34 .131 .199±.010 .050 .071 4X.067 .025 .001 TYP SQ PINS TYP LDO10C Series Data Sheet Mechanical Drawings (continued) Horizontal Mount (Model LDO10C-005W05-HJ) Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) Pin Assignments .410 .460 MAX .545 MA.5 X45 MAX Pin No. Function .055 REF .410 .410 .055 REF.055 REF 1 Enable .062 REF 2 Vin .062 REF.062 REF .050 .050 6 3 Common/RTN .030 4 Vout 5 Trim 6 Mech Pin .650 ..6 58 50 0 .580 .34 .131 .025±.00.1 025±.001 SQ PIN TY SQ P P IN TYP 5 1 .160±.010 6 PLACE6 S PLACES .071 .050 .035 .035 .125 TYP.125 TYP .025 .001 4X .067 SQ PINS TYP TYP .071 .071 .120 TYP.120 TYP 4X .067 4X .067 TYP TYP Surface Mount (Model LDO10C-005W05-SJ) Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) Pin Assignments 0.52 (13.13) Pin No. Function 0.410 (10.41) 6 0.062 (1.57) REF 1 Enable 7 7 6 2 Vin 3 Common/RTN 4 Vout 0.650 (16.51) LDO10C- 5 Trim 005W05- 6 Mech Pin 7 Mech Pin 5 1 0.040 (1.02) REF 1 5 0.035 (0.89) 0.055 (1.40) REF 0.025 (0.64) REF REF 0.125 (3.18) TYP WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Waterfront Business Park 14/F, Lu Plaza Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street USA West Midlands, DY5 1LX Kwun Tong, Kowloon +1 888 412 7832 United Kingdom Hong Kong www.artesyn.com +44 (0) 1384 842 211 +852 2176 3333 For more information: www.artesyn.com/power Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks For support: productsupport.ep@artesyn.com and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. © 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal LDO10C Series 05Jul2017 terms and conditions, please visit www.artesyn.com/legal. 0 (0.00) 0.050 (1.27) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) 0.360 (9.14)