ARTESYN PTH05010YAD
Specifications
Manufacturer
Artesyn
Manufacturers Part #
PTH05010YAD
Lead Time
12 Week Lead Time
Selling Alternatives
PTH05010YAH
Brand
Artesyn Embedded Technologies
Series
PTH05010Y
Factory Pack Quantity
1
Cooling Method
Convection
Dimensions
1.37 x 0.62 x 0.35"
Efficiency
88%
Input Voltage Nominal
5 VDC
Mechanical Style
Non-Isolated / POL
Mounting
Through Hole
Operating Temperature
- 40 to + 85°C
Output Amps 1
15 A
Power
27 W
Subcategory
DC-DC Converter
Datasheet
Extracted Text
process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev. 3.23.09_73 PTHxx010Y Series 1 of 5 652 PTHxx010Y 3.3/5/12 Vin Total Power: 27 Watts # of Outputs: Single Specifications Input Input current: Special Features No load 10 mA Input voltage range: • V bus termination output PTH03010Y 2.95 - 3.65 Vdc TT (output the system V ) PTH05010Y 4.5 - 5.5 Vdc REF • 15 A output current PTH12010Y 10.8 - 13.2 Vdc • 3.3, 5, or 12 Vdc input voltage Undervoltage lockout: • DDR and QDR compatible • ON/OFF inhibit ( for V stand- PTH03010Y Vin increasing 2.45 V typ., 2.80 V max. TT by) Vin decreasing 2.20 V min., 2.40 V typ. • Under-voltage lockout PTH05010Y Vin increasing 4.30 V typ., 4.45 V max. • Operating temperature range: Vin decreasing 3.40 V min., 3.70 V typ. -40 °C to +85 °C • Efficiencies up to 91% PTH12010Y Vin increasing 9.5 V typ., 10.4 V max. • Output overcurrent protection Vin decreasing 8.80 V min., 9.0 V typ. (non-latching, auto-reset) Input capacitance: PTH03010Y & PTH05010Y 470 µF • Point-of-Load-Alliance (POLA) (See Note 3, page 3) PTH12010Y compatible 560 µF • Available RoHS compliant Remote ON/OFF: Positive logic • 2 Year Warranty All specifications are typical at nominal input, V = 1.25 V,full load at 25 °C unless otherwise stated REF C C C = typical value in, o1, C o2 Safety • UL/cUL CAN/CSA-C22.2 No. 60950 File No. E174104 • TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044 • CB Report and Certificate to IEC60950, Certificate No. US/8292/UL process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev. 3.23.09_73 PTHxx010Y Series Specifications Continued 2 of 5 652 Output Output current: PTH03010Y & PTH05010Y ± 15 A (over VV range) REF PTH12010Y ± 12 A (See Note 1, page 3) Tracking range for V : 0.55 - 1.8 V REF Tracking tolerance to V (V - V ): -10 mV to + 10 mV REF TT REF (over line, load & temperature) Ripple and noise: 20 MHz bandwidth 20 mV pk-pk Load transient response: 30 µsµs settling settling time time (See Note 4, page 3) Overshoot/undershoot 30 mV typ. Output capacitance: Non-ceramic values PTH03010Y 470 µF µF typ., typ., 8,200 8,200 µF µF max. max. (See Notes 4 & 5, page 3) PTH05010Y 470 µF µF typ., typ., 8,200 8,200 µF µF max. max. PTH12010Y 940 µF µF typ., typ., 6,600 6,600 µF µF max. max. Ceramic values PTH03010Y 200 µF µF typ., typ., 300 300 µF µF max. max. (See Note 4, page 3) PTH05010Y 200 µF µF typ., typ., 300 300 µF µF max. max. PTH12010Y 400 µF µF typ., typ., 600 600 µF µF max. max. (See Note 6, page 3) ESR (non-ceramic) 4 mΩ min. General Specifications Efficiency: PTH03010Y 88% typ. lo = 10 A PTH05010Y 88% typ. PTH12010Y 85% typ. Insulation voltage: Non-isolated Switching frequency: PTH03010Y 300 - 400 kHz PTH05010Y 300 - 400 kHz PTH12010Y 200 - 300 kHz Approvals and standards: EN60950 UL/cUL60950 Material flammability: UL94V-0 Dimensions: (L x W x H) 34.80 x 15.75 x 9.00 mm 1.370 x 0.620 x 0.354 in Weight: 3.7 g (0.13 oz) MTBF: Telcordia SR-332 6,000,000 hours Environmental Specifications Thermal Performance: Operating ambient, temperature -40 °C to +85 °C (See Note 2, page 3) Non-operating -40 °C to +125 °C MSL (‘Z’ suffix only): JEDEC J-STD-020C Level 3 Protection Overcurrent threshold (auto reset): PTH03010Y & PTH05010Y 27.5 A typ. PTH12010Y 20.0 A typ. process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev. 3.23.09_73 PTHxx010Y Series 3 of 5 652 Ordering Information (8, 9) Output Power Input V Output Currents Efficiency Model odel Numbers Numbers TT (max) Voltage (max) Range Min Max 27 W 2.95 - 3.65 Vdc 0.55 - 1.8 Vdc 0 A ± 15 A 88% PTH03010Y 27 W 4.5 - 5.5 Vdc 0.55 - 1.8 Vdc 0 A ± 15 A 88% PTH05010Y 21.6 W 10.8 - 13.2 Vdc 0.55 - 1.8 Vdc 0 A ± 15 A 85% PTH12010Y Part Number System with Options P T H 0 5 0 1 0 Y A S T Packaging Options Product Family No Suffix = Trays Point of Load Alliance (7) T = Tape and Reel Compatible Input Voltage (8) Mounting Option 03 = 3.3 V, 05 = 5 V D = Horizontal Through-Hole (RoHS 6/6) and 12 = 12 V H = Horizontal Through-Hole (RoHS 5/6) S = Surface-Mount Solder Ball (RoHS 5/6) Output Current Z = Surface-Mount Solder Ball (RoHS 6/6) 01 = 15 A Pin Option Mechanical Package A = Through-Hole Std. Pin Length (0.140”) Always 0 A = Surface-Mount Tin/Lead Solder Ball Output Voltage Code Y = DDR Module Notes 1 Rating is conditional on the module being soldered to a 4 layer PCB 5 This is the calculated maximum. The minimum ESR limitation will with 1 oz. copper. See the SOA curves or contact the factory for often result in a lower value. Consult Application Note 177 for appropriate derating. further details. 2 This control pin has an internal pull-up to the input voltage Vin. If 6 This is the typical ESR for all the electrolytic (non-ceramic) output it is left open-circuit the module will operate when input power is capacitance. Use 7 mΩ as the minimum when using max-ESR applied. A small low-leakage (< 100 nA) MOSFET is recommended values to calculate. for control. For further information, consult Application Note 177. 7 Tape and reel packaging only available on the surface-mount 3 An input capacitor is required for proper operation. The capacitor versions. must be rated for a minimum of 800 mA rms of ripple current. 8 To order Pb-free (RoHS compatible) surface-mount parts replace 4 The typical value of external output capacitance value ensures that the mounting option ‘S’ with ‘Z’, e.g. PTHXX010YAZ. To order Pb- V meets the specified transient performance requirements for TT free (RoHS compatible) through-hole parts replace the mounting the memory bus terminations. Lower values of capacitance may option ‘H’ with ‘D’, e.g. PTHXX010YAD. be possible when the measured peak change in output current is 9 NOTICE: Some models do not support all options. Please contact consistently less than 3 A. Test conditions were 15 A/µs load step, your local Emerson Network Power representative or use the on-line -1.5 A to +1.5 A. model number search tool at http://www.PowerConversion.com to find a suitable alternative. V Termination Island TT process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev. 3.23.09_73 PTHxx010Y Series 4 of 5 652 Characteristic Data 14 16 14 12 12 10 10 Nat conv Nat conv 8 100 LFM 100 LFM 8 200 LFM 200 LFM 6 6 4 4 2 2 0 0 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure 1 - Safe Operating Area Figure 2 - Safe Operating Area Vin = 3.3 V, V = 1.25 V, Iout = 15 A (See Note A) Vin = 12 V, V = 1.25 V, Iout = 12 A (See Note A) REF REF V in V V 100 DDQ REF 1 k V 10 9 8 TT 1 % 1 7 90 Vin PTHxx010Y 3.3V 1 k (Top View) Co n 5.0V 1 % 2 6 80 hf-Ceramic 12.0V 4 3 5 C in + (Required) 70 Co + SSTL-2 1 Co 2 Low-ESR Data/ Ceramic (Required) Address/ (Optional) Q Bus 1 60 Standby BSS138 (Optional) GND 50 0 3 6 9 12 15 OUTPUT CURRENT (A) Figure 3 - Efficiency vs Load Current Figure 4 - Standard Application V = 1.25 V (See Note B) REF Notes A SOA curves represent the conditions at which internal components are within the Emerson Network Power derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. OUTPUT CURRENT (A) EFFICIENCY (%) OUTPUT CURRENT (A) process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev. 3.23.09_73 Mechanical Drawings PTHxx010Y Series 652 5 of 5 Americas 1.370 (34.80) 5810 Van Allen Way 0.140 0.125 (3.18) (3.55) Carlsbad, CA 92008 0.125 (3.18) 0.060 USA 0.060 0.375 (1.52) 0.625 (15.88) Telephone: +1 760 930 4600 ø0.040 (1.02) (1.52) (9.52) 5 Places Facsimile: +1 760 930 0698 9 8 7 1 10 Europe (UK) 0.070 (1.78) Waterfront Business Park 0.620 (Standoff Shoulder) Merry Hill, Dudley 0.500 (15.75) (12.70) West Midlands, DY5 1LX United Kingdom Lowest Component Telephone: +44 (0) 1384 842 211 0.010 min. (0.25) Bottom side Clearance Facsimile: +44 (0) 1384 843 355 2 3 4 5 6 Asia (HK) TOP VIEW 14/F, Lu Plaza Host Board 2 Wing Yip Street Kwun Tong, Kowloon 0.354 (9.00) Hong Kong MAX. Dimensions in Inches (mm) Telephone: +852 2176 3333 Tolerances (unless otherwise specified) 2 Places 0.030 (0.76) Facsimile: +852 2176 3888 SIDE VIEW 3 Places 0.010 (0.25) For global contact, visit: Figure 5 - Plated Through-Hole www.PowerConversion.com techsupport.embeddedpower @emerson.com 1.370 (34.80) While every precaution has been taken to ensure 0.125 (3.18) accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims 0.125 (3.18) *After solder reflow 0.060 0.354 (9.00) all liability for damages resulting from use of this on customer board 0.060 0.375 (1.52) information or for any errors or omissions. 0.625 (15.88) max.* (9.52) (1.52) Emerson Network Power. 1 10 9 8 7 Solder Ball The global leader in enabling ø0.040 (1.02) business-critical continuity. 10 Places 0.620 0.500 (15.75) (12.70) AC Power Lowest Component 0.010 min. (0.25) Connectivity Bottom side Clearance DC Power 2 3 4 5 6 Embedded Computing TOP VIEW SIDE VIEW Host Board Embedded Power Dimensions in Inches (mm) Monitoring Tolerances (unless otherwise specified) 2 Places 0.030 (0.76) Outside Plant 3 Places 0.010 (0.25) Power Switching & Controls Figure 6 - Surface-Mount Precision Cooling Racks & Integrated Cabinets Pin Connections Pin Connections cont. Services Pin No. Function Pin No. Function Surge Protection Pin 1 Ground Pin 6 V TT Pin 2 Vin Pin 7 Ground EmersonNetworkPower.com Emerson Network Power and the Emerson Pin 3 Inhibit* Pin 8 V REF Network Power logo are trademarks and * Denotes negative logic: service marks of Emerson Electric Co. Pin 4 N/C Pin 9 N/C ©2008 Emerson Electric Co. Open = Normal operation Pin 5 Vo sense Pin 10 N/C Ground = Function active
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the PTH05010YAD?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods