process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.3.10.09_171 PTHxx060Y 1 of 5 652 PTHxx060Y 3.3/5/12 Vin Total Power: 18 Watts # of Outputs: Single Specifications Special Features • V bus termination output Input TT (output the system V ) REF Input current: No load 10 mA • 10 A output current • 3.3, 5 or 12 Vdc input Input voltage range: PTH03060Y 2.95 - 3.65 Vdc voltage PTH05060Y 4.5 - 5.5 Vdc • DDR and QDR compatible PTH12060Y 10.8 - 13.2 Vdc • ON/OFF inhibit (for V TT Undervoltage lockout: standby) • Under-voltage lockout PTH03060Y Vin increasing 2.45 V typ., 2.80 V max. • Operating temperature Vin decreasing 2.20 V min., 2.40 V typ. range: -40 °C to +85 °C PTH05060Y Vin increasing 4.30 V typ., 4.45 V max. • Efficiencies up to 91% • Output overcurrent Vin decreasing 3.40 V min., 3.70 V typ. protection (non-latching, PTH12060Y Vin increasing 9.5 V typ., 10.4 V max. auto-reset) Vin decreasing 8.80 V min., 9.0 V typ. • Point-of-Load-Alliance (POLA) Input capacitance: compatible PTH03060Y & PTH05060Y 330 µF • Available RoHS compliant (See Note 3, page 3) PTH12060Y 560 µF • 2 Year Warranty Remote ON/OFF: Positive logic All specifications are typical at nominal input, V = 1.25 V, full load at 25˚C unless otherwise stated. ref C , C and C = typical value in o1 o2 Safety • UL/cUL CAN/CSA-C22.2 No. 60950, File No. E174104 • TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044 CB Report and Certificate to IEC60950, Certificate No. US/8292/UL process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.3.10.09_171 PTHxx060Y  of 5 652 Specifications Continued Output Output current: (over VV range) ±10 A REF (See Note 1, page 3) Tracking range for V : REF 0.55 - 1.8 V Tracking tolerance to V (V - V ): -10 mV to + 10 mV REF TT REF (over line, load & temperature) Ripple and noise: 20 MHz bandwidth 20 mV pk-pk Load transient response: 30 µs µs settling settling time time (See Note 4, page 3) Overshoot/undershoot 25 mV typ. Output capacitance: Non-ceramic values PTH03060Y 470 µF µF typ., typ., 5,500 5,500 µF µF max. max. (See Notes 4 & 5, page 3) PTH05060Y 470 µF µF typ., typ., 5,500 5,500 µF µF max. max. PTH12060Y 940 µF µF typ., typ., 5,500 5,500 µF µF max. max. Ceramic values PTH03060Y 200 µF µF typ., typ., 300 300 µF µF max. max. (See Note 4, page 3) PTH05060Y 200 µF µF typ., typ., 300 300 µF µF max. max. PTH12060Y 400 µF µF typ., typ., 600 600 µF µF max. max. (See Note 6, page 3) ESR (non-ceramic) 4 mΩ min. General Specifications Efficiency: PTH03060Y 86% typ. lo = 8 A PTH05060Y 86% typ. PTH12060Y 83% typ. Insulation voltage: Non-isolated Switching frequency: PTH03060Y 550 - 650 kHz PTH05060Y 550 - 650 kHz PTH12060Y 200 - 300 kHz Approvals and standards: EN60950 UL/cUL60950 Material flammability: UL94V-0 Dimensions: (L x W x H) 25.27 x 15.75 x 9.00 mm 0.995 x 0.620 x 0.354 in Weight: 3.7 g (0.13 oz) MTBF: Telcordia SR-332 6,000,000 hours Environmental Specifications Thermal Performance: Operating ambient, temperature -40 °C to +85 °C (See Note 2) Non-operating -40 °C to +125 °C MSL (‘Z’ suffix only): JEDEC J-STD-020C Level 3 Protection Overcurrent threshold (auto reset): All models 20 A typ. process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.3.10.09_171 PTHxx060Y 3 of 5 652 Ordering Information (8, 9) Output Power Input V Output Currents Efficiency Model odel Numbers Numbers TT (max) Voltage (max) Range Min Max 18 W 2.95 - 3.65 Vdc 0.55 - 1.8 Vdc 0 A ±10 A 86% PTH03060Y 18 W 4.5 - 5.5 Vdc 0.55 - 1.8 Vdc 0 A ±10 A 86% PTH05060Y 18 W 10.8 - 13.2 Vdc 0.55 - 1.8 Vdc 0 A ±10 A 83% PTH12060Y Part Number System with Options P T H 0 5 0 6 0 Y A S T Packaging Options Product Family No Suffix = Trays Point of Load Alliance (7) T = Tape and Reel Compatible Input Voltage (8) Mounting Option 03 = 3.3 V, 05 = 5 V D = Horizontal Through-Hole (RoHS 6/6) and 12 = 12 V H = Horizontal Through-Hole (RoHS 5/6) S = Surface-Mount Solder Ball (RoHS 5/6) Output Current Z = Surface-Mount Solder Ball (RoHS 6/6) 06 = 10 A Pin Option Mechanical Package A = Through-Hole Std. Pin Length (0.140”) Always 0 A = Surface-Mount Tin/Lead Solder Ball Output Voltage Code Y = DDR Module Notes 1 Rating is conditional on the module being soldered to a 4 layer PCB 5 This is the calculated maximum. The minimum ESR limitation will with 1 oz. copper. See the SOA curves or contact the factory for often result in a lower value. Consult Application Note 179 for appropriate derating. further details. 2 This control pin has an internal pull-up to the input voltage Vin. If 6 This is the typical ESR for all the electrolytic (non-ceramic) output it is left open-circuit the module will operate when input power is capacitance. Use 7 mΩ as the minimum when using max-ESR applied. A small low-leakage (<100 nA) MOSFET is recommended for values to calculate. control. For further information, consult Application Note 179. 7 Tape and reel packaging only available on the surface-mount 3 An input capacitor is required for proper operation. The capacitor versions. must be rated for a minimum of 500 mA rms (1000 mA for 12 V 8 To order Pb-free (RoHS compatible) surface-mount parts replace input) of ripple current. For further information, consult Application the mounting option ‘S’ with ‘Z’, e.g. PTHXX060YAZ. To order Pb- Note 179 on capacitor selection. free (RoHS compatible) through-hole parts replace the mounting 4 The typical value of external output capacitance value ensures that option ‘H’ with ‘D’, e.g. PTHXX060YAD. V meets the specified transient performance requirements for TT 9 NOTICE: Some models do not support all options. Please contact the memory bus terminations. Lower values of capacitance may your local Emerson Network Power representative or use the on-line be possible when the measured peak change in output current is model number search tool at http://www.PowerConversion.com to consistently less than 3 A. Test conditions were 15 A/µs load step, find a suitable alternative. -1.5 A to +1.5 A. V Termination Island tt process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.3.10.09_171 PTHxx060Y  of 5 652 PTHxx060Y Characteristic Data 14 12 10 10 8 8 Nat conv Nat conv 6 100 LFM 100 LFM 6 200 LFM 200 LFM 4 4 2 2 0 0 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE (ºC) AMBIENT TEMPERATURE (ºC) Figure 1 - Safe Operating Area Figure 2 - Safe Operating Area Vin = 5.0 V, V = 1.25 V, Iout = 10 A (See Note A) Vin = 12 V, V = 1.25 V, Iout = 10 A (See Note A) REF REF Vin V DDQ 100 V REF 10 9 8 1 k 1 7 1 % V tt 90 PTHxx060Y 1 k (Top View) 1 % 6 Co n 2 Vin hf-Ceramic 80 3.3V 3 4 5 5.0V Cin + 12.0V (Required) 70 Co + 1 SSTL-2 Low-ESR Co 2 Data/ (Required) Ceramic Address/ (Optional) Bus 60 Q1 Standby BSS138 (Optional) GND 50 0 2 4 6 8 10 OUTPUT CURRENT (A) Figure 4 - Standard Application Figure 3 - Efficiency vs Load Current V = 1.25 V (See Note B) REF Notes A SOA curves represent the conditions at which internal components are within the Emerson Network Power derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. EFFICIENCY (%) OUTPUT CURRENT (A) OUTPUT CURRENT (A) process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.3.10.09_171 Mechanical Drawings PTHxx060Y 5 of 5 Americas 652 5810 Van Allen Way 0.995 (25.27) Carlsbad, CA 92008 0.140 0.125 (3.18) USA (3.55) 0.125 (3.18) Telephone: +1 760 930 4600 0.060 0.250 0.060 0.375 (1.52) Facsimile: +1 760 930 0698 (6.35) ø0.040 (1.02) (1.52) (9.52) 5 Places. Europe (UK) 1 10 9 8 7 Waterfront Business Park Merry Hill, Dudley 0.070 (1.78) 0.620 (Standoff Shoulder) West Midlands, DY5 1LX 0.500 (15.75) (12.70) United Kingdom Telephone: +44 (0) 1384 842 211 Lowest Component Facsimile: +44 (0) 1384 843 355 0.010 min. (0.25) Bottom side Clearance 2 3 4 5 6 Asia (HK) 14/F, Lu Plaza TOP VIEW 2 Wing Yip Street Host Board Kwun Tong, Kowloon Hong Kong 0.354 (9.00) Telephone: +852 2176 3333 MAX. Dimensions in Inches (mm) Tolerances (unless otherwise specified) Facsimile: +852 2176 3888 2 Places 0.030 (0.76) SIDE VIEW 3 Places 0.010 (0.25) For global contact, visit: Figure 5 - Plated Through-Hole www.PowerConversion.com techsupport.embeddedpower @emerson.com 0.995 (25.27) While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson 0.125 (3.18) Network Power assumes no responsibility, and disclaims 0.125 (3.18) all liability for damages resulting from use of this *After solder reflow 0.060 0.354 (9.00) 0.250 information or for any errors or omissions. 0.060 0.375 on customer board (1.52) max.* (1.52) (9.52) (6.35) Emerson Network Power. 1 10 9 8 7 The global leader in enabling Solder Ball ø0.040 (1.02) business-critical continuity. 10 Places 0.620 0.500 (15.75) (12.70) AC Power Lowest Component Connectivity 0.010 min. (0.25) Bottom side Clearance DC Power 2 3 4 5 6 Embedded Computing TOP VIEW SIDE VIEW Host Board Embedded Power Monitoring Dimensions in Inches (mm) Tolerances (unless otherwise specified) Outside Plant 2 Places 0.030 (0.76) 3 Places 0.010 (0.25) Power Switching & Controls Figure 6 - Surface-Mount Precision Cooling *Denotes negative logic: Racks & Integrated Cabinets Pin Connections Pin Connections cont. Open = Normal operation Services Pin No. Function Ground = Function active Pin No. Function Surge Protection Pin 1 Ground Pin 6 V TT Pin 2 Vin Pin 7 Ground EmersonNetworkPower.com Pin 3 Inhibit* Emerson Network Power and the Emerson Pin 8 V REF Network Power logo are trademarks and Pin 4 N/C service marks of Emerson Electric Co. Pin 9 N/C ©2008 Emerson Electric Co. Pin 5 Vo sense Pin 10 N/C