ARTESYN SIL05E-05W3V3-HJ

POWER SIL05E Series Data Sheet Non-Isolated DC-DC Converters Total Power: 18 Watts Input Voltage: 3.0 - 5.5 Vdc # of Outputs: Single SPECIAL FEATURES ƒ 5 A current rating ƒ Input voltage range: 3.0 - 5.5 Vdc The SIL05E series are non-isolated dc-dc converters packaged in a single-in-line footprint giving ƒ Output voltage range: designers a cost effective solution for conversion from a 3.3 - 5 Vin source. The SIL05E has a 0.75 - 3.63 V wide input range (3.0 - 5.5 Vdc) and offers a wide 0.75 - 3.63 Vdc output voltage range with ƒ Ultra-high efficiency: a 5 A load, which allows for maximum design flexibility and a pathway for future upgrades. 94% @ 5 Vin and 3.3 Vout The SIL05E is designed for applications that include distributed power, workstations, optical ƒ Extremely low internal power network and wireless applications. Implemented using state of the art automated manufacturing dissipation techniques, the SIL05E offers compact size and efficiencies of up to 94%. ƒ Minimal thermal design concerns ƒ Designed in reliability: MTBF of >9 million hours per Electrical Specifications Telcordia SR-322 Input ƒ Ideal solution where board space is Input voltage ra nge 3.0 - 5.5 Vdc at a premium or tighter card pitch Input current No load (max.) 150 mA is required Input current (max.) 3.9 A max. @ Io max. and Vout = 3.3 V ƒ Industry standard footprint Input reflected ripple 40 mA rms ƒ Available RoHS compliant Remote ON/OFF See Note 1 ƒ Two year warranty Start-up time 20 ms SAFETY Output Voltage adjustability 0.75 - 3.63 Vdc ƒ UL, cUL CAN/CSA 22.2 No. E174104 Setpoint accuracy ±0.4%. UL60950 File No. E174104 Line regulation ±1.0% ƒ TÜV Product Service (EN60950) Load regulation ±1.0% Certificate No. B 03 10 38572 Minimum load 0 A ƒ CB report and certificate to Overshoot/undershoot None DE3-51686M1 Ripple and noise 75 mV pk=pk 5 Hz to 20 MHz 25 mV rms Temperature co-efficient ±0.01%/ °C Transient response 60 mV max. deviation 50 μs recovery within 1% Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. SIL05E Series Data Sheet General Specifications Environmental Specifications Efficiency 94% Thermal performance Operating ambient temperature -40 °C to +85 °C See Note 2 Non-operating temperature -40 °C to +125 °C Insulation voltage Non-isolated Protection Switching frequency Fixed 300 kHz typical Short-circuit Continuous Approvals and EN60950 standards UL/cUL60950 Thermal Automatic recovery Material flammability UL94V-0 Dimensions L x W x H 22.90 x 7.09 x 10.21 mm EMC Characteristics 0.902 x 0.279 x 0.402 inches Electrostatic discharge EN61000-4-2, IEC801-2 Weight 2.5 g (0.09 oz) Conducted immunity EN61000-4-6 Coplanarity 100 μm Radiated immunity EN61000-4-3 MTBF Telcordia SR-332 9,009,000 hours Ordering Information Regulation Model Output Power Input Output Output Current Output Current Efficiency (3, 4) Number (Max.) Voltage Voltage (Min.) (Max.) (Typical) Line Load SIL05E-05W3V3-VJ 18.15 W 3.0 - 5.5 Vdc 0.75 - 3.63 Vdc 0 A 5 A 94% ±1.0% ±1.0% Part Number System with Options Product Family Rated Output Performance Input Voltage Type of Output Output Voltage Mounting/Packaging Current Options SIL 05 E - 05 W 3V3 - VJ SIL = Single In Line 05 = 5 Amps E = Enhanced 05 = 3.0 - 5.5 Vdc W = Wide 0.75 - 3.63 Vdc V = Vertical Performance H = Horizontal J = Pb-free RoHS 6/6 compliant Notes: Output Voltage Adjustment 1. The SIL05E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/ OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to The ultra-wide output voltage trim range offers major advantages to users ground. The following conditions apply for the SIL05E: who select the SIL05E-05W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output Configuration Converter Operation voltage can be trimmed in a range of 0.75 to 3.63 Vdc. Remote pin open circuit Unit is ON Remot pin pulled low Unit is ON When the SIL05E-05W3V3 converter leaves the factory, the output has been Remote pinpulled high [Von/off > 2.5 V] Unit is OFF adjusted to the default voltage of 0.75 V. A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please • When Vin >4.5 V, then Vout can be adjusted from 0.75 - 3.63 Vdc use part number SIL05E-05W3V3-VRJ. 2. Full derating curves available in both the Longform (Technical Reference) and Application Note. • When Vin <4.5 V, then Vout can be adjusted from 0.75 - 2.75 Vdc 3. For horizontal mounting option, please consult factory for details. 4. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line model number search tool at http://www.Artesyn.com/power to find a suitable alternative. SIL05E Series Data Sheet Mechanical Drawings Mating Connectors 0.279 0.902 [22.90] [7.09] 0.402 [10.21] Pin Assignments 5 4 3 2 1 Pin Function 1 Vout 2 Trim 3 Ground 0.150 [3.81] 0.050 [1.27] 4 Vin 0.025[0.64] x 0.025[0.64] 5 Remote ON/OFF 0.100 [2.54] Connector 5 places 0.600 [15.24] 0.700 [17.78] All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) 0.800 [20.32] unless otherwise stated WORLDWIDE OFFICES Asia (HK) Americas Europe (UK) 14/F, Lu Plaza 2900 S.Diablo Way Waterfront Business Park 2 Wing Yip Street Tempe, AZ 85282 Merry Hill, Dudley Kwun Tong, Kowloon USA West Midlands, DY5 1LX Hong Kong +1 888 412 7832 United Kingdom www.artesyn.com +852 2176 3333 +44 (0) 1384 842 211 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn For more information: www.artesyn.com/power Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use For support: productsupport.ep@artesyn.com of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. SIL05E Series 26Mar2015