ARTESYN SIL25C-12SNEG-VJ

SIL25C Series 12 Vin single negative output DC-DC CONVERTERS C Class Non-isolated 1 NEW Product • 25 A current rating • Input voltage range: 10.2 Vdc to 13.8 Vdc • nominal output voltage: -5.05 Vdc • Industry leading value • Cost optimized design • Excellent transient response • Output Voltage adjustability • Supports silicon voltage migration • Resulting in reduced design-in and qualification time • Designed in reliability: MTBF of 3 million hours per Telcordia SR-332 • Available RoHS compliant The SIL25C Series is a new high density non-isolated dc-dc converter. The converter has a wide input range (10.2 Vdc to 13.8 Vdc) and offers a -4.5 Vdc to -5.5 Vdc output voltage range with a 25 A load. The series offers remote ON/OFF, overtemperature protection and overcurrent protection as standard. The remote sense feature enables the SIL25C compensate for voltage drops between the converters output and the load. With full international safety approvals including EN60950 and UL/cUL60950 the SIL25C reduces compliance costs and time to market. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25 °C ambient unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS INPUT SPECIFICATIONS (CONTD.) Voltage adjustability (See Note 1) -4.5 Vdc to -5.5 Vdc Turn ON threshold 10 Vdc Turn OFF threshold 9.5 Vdc Output setpoint accuracy Using 1.0% trim resistors ±3.0% GENERAL SPECIFICATIONS Line regulation Low line to high line ±1.0% max. Efficiency 90% Load regulation Full load to min. load ±1.0% max. Switching frequency Fixed (2 phase) 250 kHz typ. per phase Min./max. load 0 A/25 A Approvals and (See Note 7) TÜV Product Services Ripple and noise (See Note 2) 100 mV pk-pk standards (pending) IEC60950, UL/cUL60950 5 Hz to 20 MHz 50 mV rms Material flammability UL94V-0 Transient response Deviation 75 mV typ. (See Note 3) 150 μs recovery to Weight 28.3 g (1 oz) within regulation band MTBF Telcordia SR-332 3,000,000 hours INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input voltage range Nominal 12 V 10.2-13.8 +Vdc Thermal performance Operating ambient, -40 ºC to +80 ºC Input current No load 400 mA (See Note 8) temperature Remote OFF 30 mA Non-operating -40 ºC to +125 ºC Input current (max.) (See Note 4) 14.2 A max. @ Io max. and Vin = 10.8 V PROTECTION Input reflected ripple (See Note 2) 300 mA (pk-pk) Short-circuit Hiccup, non-latching Over-temperature Hiccup, non-latching Remote ON/OFF Logic compatibility Logic high ON >2.4 Vdc RECOMMENDED SYSTEM CAPACITANCE OFF <1.2 Vdc Input capacitance (See Note 9) 3 x 270 μF Start-up time Power up <10 ms Output capacitance (See Note 9) 3 x 680 μF (See Note 5) Remote ON/OFF <10 ms International Safety Standard Approvals (pending) UL/cUL CAN/CSA 22.2 No. TBD UL60950 File No. TBD TÜV Product Service (EN60950) Certificate No. TBD CB report and certificate to TBD File Name: sil25c_12_neg.pdf Rev (02): 16 Dec 2005 SIL25C Series 12 Vin single negative output DC-DC CONVERTERS C Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER OVP CURRENT CURRENT (10) (11,12) VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 125 W 10.2-13.8 Vdc N/A -5.05 V 0 A 25 A 90% ±1.0% ±1.0% SIL25C-12SNEG-VJ Part Number System with Options SIL25C-12SNEG-VJ (11) Product Family Packaging Options SIL = Single in Line J = Pb-free (RoHS 6/6 compliant) Mounting Option Rated Output Current V = Vertical Mount 25 = 25 Amps Polarity Performance NEG = -5.05 V C = Cost Optimized Number of Outputs S = Single Output Input Voltage 12 = 10.2 Vdc to 13.8 Vdc N No ot te es s 1 Uses external resistor. See Application Note 148 for details. 2 Measured with external filter. See Application Note 148 for details. 3 di/dt = 1 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max to 0.75 lo max and 0.75 lo max to 0.5 lo max. 4 External input fusing is recommended. 5 Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. 6 Signal line assumed <3 m. 7 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8 See Application Note 148 for operation above 50ºC. 9 See Application Note 148 for ripple current requirements. 10 Output can be adjusted from -4.5 Vdc to -5.5 Vdc. 11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. File Name: sil25c_12_neg.pdf Rev (02): 16 Dec 2005 SIL25C Series 12 Vin single negative output DC-DC CONVERTERS C Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product ID LABEL LOCATION 2.400 [60.96] 0.520 [13.21] 0.470 [11.94] 0.158 [4.02] PIN 1 0.100 [2.54] TYP. Dimensions in Inches Approx Metric Equiv in (mm) 0.260±0.030 Third Angle Projections [6.60±0.760] Tolerances (unless otherwise specified) 3 Places 0.010 (0.250) PIN CONNECTIONS PIN NO. FUNCTION PIN NO. FUNCTION 1 TRIM 13 Vin 2 Not Connected 14 Vin 3 Ground 15 Vout 4 Power Good 16 Vout 5 No Pin 17 Ground 6 Not Connected 18 Vout 7 Ground 19 Ground 8 Ground 20 Vout 9 Remote ON/OFF 21 Ground 10 Remote Sense (GND) 22 Vout 11 Remote Sense (V ) 23 Ground o 12 Vin 24 Vout Mechanical Drawing and Pinout Table Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: 4 Application Note 4 Longform Datasheet www.artesyn.com File Name: sil25c_12_neg.pdf Rev (02): 16 Dec 2005 1.250 [31.75] 0.140 [3.56] 0.140 [3.56]