ARTESYN SMT05E-05W3V3J

Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e 1 of 4 SMT05E Series 3.0-5.5 Vin single output Total Power: 8.25W Input Voltage: 3.0 - 5.5 Vdc # of Outputs: Single Special Features • 5 A Current rating The SMT05E series are non-isolated dc-dc converters packaged in • Input voltage range: a surface mount footprint giving designers a cost effective 3.0 Vdc - 5.5 Vdc • Output voltage range: solution for conversion from a 3.3 Vdc to 5 Vdc source. The 0.75 Vdc - 3.63 Vdc • Ultra high efficiency: SMT05E has a wide input range (3.0 Vdc to 5.5 Vdc) and offers a 94% @ 5 Vin and 3.3 Vout wide 0.75 Vdc to 3.63 Vdc output voltage range with a 5 A load, • Extremely low internal power dissipation which allows for maximum design flexibility and a pathway for • Minimal thermal future upgrades. The SMT05E is designed for applications that design concerns • Designed in reliability: include distributed power, workstations, optical network and MTBF of >9 million hours per Telcordia SR-332 wireless applications. Implemented using state of the art • Ideal solution where board surface-mount technology and automated manufacturing space is at a premium or tighter card pitch is required techniques, the SMT05E offers compact size and efficiencies of up • Industry standard to 94%. surface-mount footprint • Available RoHS compliant • 2 year warranty Safety UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 TÜV Product Service (EN60950) Certificate No. B 03 10 38572 CB report and certificate to DE3-51686M1 Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e Specifications 2 of 4 All specifications are typical at nominal input, full load at 25°C unless otherwise stated. EMC CHARACTERISTICS OUTPUT SPECIFICATIONS Voltage adjustability 0.75-3.63 Vdc Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Setpoint accuracy ±0.4% Radiated immunity EN61000-4-3 Line regulation ±1.0% GENERAL SPECIFICATIONS Load regulation ±1.0% Efficiency See Table Minimum load 0 A Insulation voltage Non-isolated Overshoot/undershoot None Switching frequency Fixed 300 kHz typ. Ripple and noise 75 mV pk-pk Approvals and EN60950 5 Hz to 20MHz 25 mV rms standards UL/cUL60950 Temperature co-efficient ±0.01%/°C Material flammability UL94V-0 Transient response 60 mV max. deviation 50 μs recovery to Dimensions (LxWxH) 20.32 x 11.43 x 6.70 mm within 1% 0.800 x 0.450 x 0.264 inches Weight 2.8 g (0.10 oz) INPUT SPECIFICATIONS Coplanarity 100 μm Input voltage range 3.0-5.5 Vdc MTBF Telcordia SR-332 9,009,000 hours Input current No load (max.) 150 mA Input current (max.) 3.9 A max. @ Io max. ENVIRONMENTAL SPECIFICATIONS and Vout = 3.3 V Thermal performance Operating ambient, -40 °C to +85 °C Input reflected ripple 40 mA rms (See Note 2) temperature Non-operating -40 °C to +125 °C Remote ON/OFF (See Note 1) Start-up time 20 ms PROTECTION Short-circuit Continuous Thermal Automatic recovery Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e Specifications 3 of 4 All specifications are typical at nominal input, full load at 25°C unless otherwise stated. OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER CURRENT CURRENT (3,4) VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 8.25 W 3.0-5.5 Vdc 1.5 Vdc 0 A 5 A 87.5% ±1.0% ±1.0% SMT05E-05S1V5J 18.15 W 3.0-5.5 Vdc 0.75-3.63 Vdc 0 A 5 A 94% ±1.0% ±1.0% SMT05E-05W3V3J Part Number System with Options SMT05E-05W3V3-TJ (3) Product Family Packaging Options SMT = Surface Mount No ‘-T’ Suffix = Pb-free RoHS 6/6 compliant parts in trays e.g SMT30E-12W3V3J -TJ = Pb-free RoHS 6/6 compliant part in Tape Rated Output Current and Reel e.g SMT30E-12W3V3-TJ 05 = 5 Amps Performance Output Voltage E = Enhanced Performace 0.75 Vdc to 3.63 Vdc Input Voltage Type of Output 05 = 3.0 Vdc to 5.5 Vdc S = Single W = Wide Output Voltage Adjustment of the SMT05E-05W3V3J Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT05E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.75 Vdc to 3.63 Vdc. When the SMT05E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 0.75 V. • When Vin ≥ 4.5 V, then Vout can be adjusted from 0.75 Vdc to 3.63 Vdc • When Vin < 4.5 V, then Vout can be adjusted from 0.75 Vdc to 2.75 Vdc Notes 1 The SMT05E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT05E: Configuration Converter Operation Remote pin open circuit Unit is ON Remote pin pulled low Unit is ON Remote pin pulled high [Von/off > 2.5 V] Unit is OFF An ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please use part number SMT05E-05W3V3-RJ or SMT05E-05W3V3-RTJ. 2 Full derating curves available in both the Longform Datasheet and Application Note. 3 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 4 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e 4 of 4 Americas 5810 Van Allen Way Carlsbad, CA 92008 0.160 (4.06) USA Telephone: +1 760 930 4600 0.160 (4.06) 0.190 (4.83) Facsimile: +1 760 930 0698 0.180 (4.57) Europe (UK) Waterfront Business Park 4 3 2 Merry Hill, Dudley West Midlands, DY5 1LX TOP VIEW United Kingdom 1 Telephone: +44 (0) 1384 842 211 5 0.800 (20.32) Facsimile: +44 (0) 1384 843 355 0.041 BOTTOM VIEW (1.04) Asia (HK) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: SEATING www.powerconversion.com PLANE SIDE VIEW technicalsupport@powerconversion.com CONNECTOR (5PL) All dimensions in inches (mm) LENGTH 0.090 (2.29) While every precaution has been taken to ensure All tolerance ±0.010in (±0.25mm) WIDTH 0.062 (1.57) accuracy and completeness in this literature, Emerson unless otherwise stated Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. PIN CONNECTIONS Emerson Network Power. The global leader in enabling PIN NUMBER FUNCTION business-critical continuity. 1 Remote ON/OFF AC Power 2 Vout Connectivity 3Trim DC Power 4 Ground Embedded Power 5+Vin Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co. 0.264 [6.70] 0.450 (11.43) 0.350 (8.90) 0.050 0.062 (1.57) (1.26) 0.060 (1.52) 0.340 (8.64)