ARTESYN SMT05E-12W3V3J

Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e_12 1 of 4 SMT05E Series 12 Vin single output Total Power: 16.5W Input Voltage: 10 - 14 Vdc # of Outputs: Single Special Features • 5 A Current rating The SMT05E series are non-isolated dc-dc converters packaged in • Input voltage range: a surface-mount footprint giving designers a cost effective 10 Vdc to 14 Vdc • Output voltage range: solution for conversion from a 12 V source. The SMT05E has a 0.8 Vdc to 3.63 Vdc • Ultra high efficiency: wide input range (10 Vdc to 14 Vdc) and offers a wide 0.8 Vdc to 91% @ 12 Vin and 3.3 Vout 3.63 Vdc output voltage range with a 5A load, which allows for • Extremely low internal power dissipation maximum design flexibility and a pathway for future upgrades. • Minimal thermal design The SMT05E is designed for applications that include distributed concerns • Designed in reliability: power, workstations, optical network and wireless applications. MTBF of 6,920,000 hours per Telcordia SR-332 Implemented using state of the art surface-mount technology and • Ideal solution where board automated manufacturing techniques, the SMT05E offers space is at a premium or tighter card pitch is compact size and efficiencies of up to 91%. required • Industry standard surface-mount footprint • Available RoHS compliant • 2 year warranty Safety UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 TÜV Product Service (EN60950) Certificate No. B 03 10 38572 CB report and certificate to DE3-51686M1 Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e_12 Specifications 2 of 4 All specifications are typical at nominal input, full load at 25°C unless otherwise stated. OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability 0.8-3.63 Vdc Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Setpoint accuracy ±0.4% typ. Radiated immunity EN61000-4-3 Line regulation ±0.2% typ. GENERAL SPECIFICATIONS Load regulation ±1.0% typ. Efficiency 91% Total error band ±3.0% typ. Insulation voltage Non-isolated Minimum load 0 A Switching frequency Fixed 330 kHz typ. Overshoot/undershoot None Approvals and EN60950 Ripple and noise 5 Hz to 20 MHz 60 mV pk-pk standards UL/cUL60950 25 mV rms Material flammability UL94V-0 Temperature co-efficient ±0.01%/°C Dimensions (LxWxH) 20.32 x 11.43 x 5.97 mm Transient response 50 mV max. deviation 0.800 x 0.450 x 0.235 inches 50 μs recovery to within ±1.0% Weight 3 g (0.11 oz) Coplanarity 100 μm INPUT SPECIFICATIONS MTBF Telcordia SR-332 6,920,000 hours Input voltage range 10-14 Vdc Input current No load (max.) 100 mA ENVIRONMENTAL SPECIFICATIONS Input current (max.) 1.85 A max. @ Io max. Thermal performance Operating ambient, -40 °C to +100 °C and Vout = 3.3 V (See Note 2) temperature Non-operating -40 °C to +125 °C Input reflected ripple 30 mA rms Remote ON/OFF (See Note 1) PROTECTION Start-up time 20 ms Short-circuit Continuous Thermal Automatic recovery Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e_12 Specifications 3 of 4 All specifications are typical at nominal input, full load at 25°C unless otherwise stated. OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER CURRENT CURRENT (3,4) VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 16.5 W 10-14 Vdc 0.8-3.63 Vdc 0 A 5 A 91% ±0.2% ±1.0% SMT05E-12W3V3J Part Number System with Options SMT05E-12W3V3-TJ (3) Product Family Packaging Options SMT = Surface Mount No ‘-T’ Suffix = Pb-free RoHS 6/6 compliant parts in trays e.g SMT30E-12W3V3J -TJ = Pb-free RoHS 6/6 compliant part in Tape Rated Output Current and Reel e.g SMT30E-12W3V3-TJ 05 = 5 Amps Performance Output Voltage E = Enhanced Performace 0.8 Vdc to 3.63 Vdc Type of Output S = Single W = Wide Input Voltage 12 = 10 Vdc to 14 Vdc Output Voltage Adjustment of the SMT05E-12W3V3J Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT05E-12W3V3J. It is no longer necessary to purchase a variety of modules in order to cover ddcifferent output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT05E-12W3V3J converter leaves the factory the output has been adjusted to the default voltage of 0.8 V. Notes 1 The SMT05E features an ‘Positive Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT05E: Configuration Converter Operation Remote pin open circuit Unit is ON Remote pin pulled low [Von/off <0.8 V] Unit is OFF Remote pin pulled high [Von/off >1.6 V] Unit is ON An ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘-R’ at the end of the model numer, e.g. SMT05E-12W3V3-RJ. 2 Full derating curves available in both the Longform Datasheet and Application Note. 3 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 4 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Embedded Power for Business-Critical Continuity Rev.06.26.07 smt05e_12 4 of 4 Americas 5810 Van Allen Way Carlsbad, CA 92008 USA 0.160 Telephone: +1 760 930 4600 (4.06) Facsimile: +1 760 930 0698 0.190 0.160 TOP VIEW (4.83) (4.06) 0.180 (4.57) Europe (UK) 4 32 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX 5 1 United Kingdom Telephone: +44 (0) 1384 842 211 BOTTOM VIEW 0.800 Facsimile: +44 (0) 1384 843 355 (20.32) Asia (HK) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong SIDE VIEW Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 All dimensions in inches (mm) Seating All tolerance ±0.010in (±0.25mm) Plane unless otherwise stated For global contact, visit: www.powerconversion.com Connector (5PL) Width :0.090 (2.29) technicalsupport@powerconversion.com Length: 0.062 (1.57) While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. PIN CONNECTIONS Emerson Network Power. The global leader in enabling PIN NUMBER FUNCTION business-critical continuity. 1 Remote ON/OFF AC Power 2 Vout Connectivity 3Trim DC Power 4 Ground Embedded Power 5Vin Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co. 0.235 0.450 (5.97) (11.43) 0.062 (1.57) 0.350 (8.90) 0.060 0.340 (1.52) (8.64)