ARTESYN SMT10E-12W3V3J

process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.3.4.09_90 SMT10E_05 Series 1 of 4 652 SMT10E Series 3.0 - 5.5 Vin Total Power: 13.2 Watts Input Voltage: 3.0 - 5.5 Vdc # of Outputs: Single Electrical Specifications Input Special Features Input voltage range: 3.0-5.5 Vdc • 10 A current rating • Input voltage range: Input current: No load 70 mA typ. 3.0 Vdc to 5.5 Vdc Input current (max.): 8 A max. @ lo max. • Output voltage range: and Vout = 3.63 V 0.8 Vdc to 3.63 Vdc • Ultra high efficiency: Input current ripple: 110 mA rms 96% @ 5 Vin and 3.3 Vout Remote ON/OFF: (See Note 2) • Extremely low internal power dissipation Start-up time: 20 ms • Minimal thermal design Output concerns • Designed in reliability: Voltage adjustability: Fixed output versions ±10% MTBF of >7 million hours per (See Note 1) Wide trim version 0.8 - 3.63 Vdc Telcordia SR-332 Setpoint accuracy: • Ideal solution where board space ±0.4% is at a premium or tighter card Line regulation: ±0.2% pitch is required Load regulation: • Industry standard surface-mount ±1.0% footprint Minimum load: 0 A • Available RoHS compliant Overshoot/Undershoot: • 2 year warranty None Ripple and noise: 0 to 20 mHz BW 50 mV pk-pk 25 mV rms max. Safety Temperature co-efficient: ±0.01%/˚C • UL/cUL CAN/CSA 22.2 Transient response: No. E186249 60 mV max. deviation • TÜV Product Service (EN60950) 50µs recovery to within ±1.0% Certificate No. B 08 05 51485 378 Remote sense: 10% Vo compensation • CB report and certificate to DE3-51686M1 All specifications are typical at 5 Vin and 3.3 Vout, full load at 25 °C unless otherwise stated. process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.3.4.09_90 SMT10E_05 Series 2 of 4 652 EMC Characteristics Electrostatic discharge: EN61000-4-2, IEC801-2 Conducted immunity: EN61000-4-6 EN61000-4-3 Radiated immunity: General Specifications Efficiency: See table Insulation voltage: Non-isolated Switching frequency: Fixed 300 kHz typ. Approvals and standards: EN60950 UL/cUL60950 Material flammability: UL94V-0 Dimensions (L x W x H) 33.02 x 13.46 x 8.21 mm 1.3 x 0.53 x 0.323 inches Weight: 6.3 g (0.22 oz) Coplanarity: 100 µm MTBF: Telcordia SR-332 7,042,000 hours MIL-HDBK-217F 680,000 hours Environmental Specifications Thermal performance: Operating ambient temperature -40° C to +100 °C (See Note 3) Non-operating -40 °C to +125 °C Protection Short circuit: Continuous Thermal: Automatic recovery process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.3.4.09_90 SMT10E_05 Series Ordering Information 3 of 4 652 All specifications are typical at 5 Vin and 3.3 Vout, full load at 25 °C unless otherwise stated. Ordering Information Output Currents Regulation Output Efficiency (2, 4, 5) Input Voltage Output Voltage Model Numbers Power (Max.) (typ.) Min Max Line Load 13.2 W 3.0 - 5.5 Vdc 1.2 Vdc 0 A 10 A 89% ±0.2% ±1.0% SMT10E-05S1V2J (EOL) 16.5 W 3.0 - 5.5 Vdc 1.5 Vdc 0 A 10 A 90% ±0.2% ±1.0% SMT10E-05S1V5J (EOL) 19.8 W 3.0 - 5.5 Vdc 1.8 Vdc 0 A 10 A 92% ±0.2% ±1.0% SMT10E-05S1V8J (EOL) 27.5 W 3.0 - 5.5 Vdc 2.5 Vdc 0 A 10 A 95% ±0.2% ±1.0% SMT10E-05S2V5J (EOL) 36.3 W 4.5 - 5.5 Vdc 3.3 Vdc 0 A 10 A 96% ±0.2% ±1.0% SMT10E-05S3V3J (EOL) 36.3 W 3.0 - 5.5 Vdc 0.8 - 3.63 Vdc 0 A 10 A 96% ±0.2% ±1.0% SMT10E-05W3V3J Part Number System with Options SMT10E-05S3V3J (4) Product Family Packaging Options SMT = Surface-mount J = Pb-free (RoHS 6/6 compliant) Rated Output Current Output Voltage 10 = 10 Amps 1V2 = 1.2 V, 1V5 = 1.5 V, 1V8 = 1.8 V, 2V5 = 2.5 V, 3V3 = 3.3 V Performance E = Enhanced Performance Type of Output S = Single W = Wide Input Voltage 05 = 3.0 Vdc to 5.5 Vdc Output Voltage Adjustment of the SMT10E-05W3V3J Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT10E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT10E-05W3V3J converter leaves the factory the output has been adjusted to the default voltage of 3.3V. • When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc • When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc Notes Notes Continued 1 When Vin ≥ 4.5 V, then Vout can be adjusted from 0.8 Vdc to 3.6 Vdc. 3 Full derating curves available in both the Longform Datasheet and When Vin < 4.5 V, then Vout can be adjusted from 0.8 Vdc to 2.75 Vdc. Application Note 168. 2 The SMT10E features a ‘Negative Logic’ Remote ON/OFF operation. If 4 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special not using the Remote ON/OFF pin, leave the pin open (the converter will be request, please contact your local sales representative for details. on). The Remote ON/OFF pin is referenced to ground. 5 NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model The following conditions apply for the SMT10E: number search tool at http://www.PowerConversion.com to find a suitable alternative. Configuration Converter Operation Remote pin open circuit Unit is ON Remote pin pulled low Unit is ON Remote pin pulled high [Von/off >1.2 V] Unit is OFF A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘-R’ at the end of the model number, e.g. SMT10E-05W3V3-RJ. process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.3.4.09_90 SMT10E_05 Series Americas 4 of 4 652 Mechanical Drawing 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 TOP VIEW Facsimile: +1 760 930 0698 0.039 (1.00) Europe (UK) 0.039 (1.00) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX BOTTOM VIEW United Kingdom 0.190 Telephone: +44 (0) 1384 842 211 0.310 0.190 (4.83) Facsimile: +44 (0) 1384 843 355 (7.87) (4.83) 0.190 1.3000.010 (33.02 0.25) 0.297 (4.83) (7.54) Asia (HK) 14/F, Lu Plaza 43 2 5 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 1 6 Facsimile: +852 2176 3888 SIDE VIEW 0.048 (1.22) For global contact, visit: 0.007 (0.18) Min Clearance www.PowerConversion.com techsupport.embeddedpower Seating Plane @emerson.com While every precaution has been taken to ensure Max. component accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims Connector (6PL) All dimensions in inches (mm) all liability for damages resulting from use of this Width: 0.112 0.003 (2.84 0.08) All tolerance 0.010in (0.25 mm) information or for any errors or omissions. Length: 0.062 0.002 (1.57 0.04) unless otherwise stated Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Pin Connections Connectivity Pin Number Function DC Power Pin 1 Remote ON/OFF Embedded Computing Pin 2 Remote Sense + Embedded Power Pin 3 Trim Monitoring Pin 4 +Vout Outside Plant Pin 5 Ground Power Switching & Controls Pin 6 +Vin Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. 0.323 (8.21) Installed Ht. 0.530 0.010 (13.46 0.25) 0.430 (10.92) 0.405 (10.29) 0.075 (1.91)