ARTESYN SMT15E-12W3V3J

process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.3.4.09_91 SMT15E_12 Series 1 of 4 652 SMT15E Series 12 Vin Total Power: 49.5 Watts Input Voltage: 10-14 Vdc # of Outputs: Single Electrical Specifications Special Features Input • 15 A Current rating Input voltage range: 10-14 Vdc • Input voltage range: Input current: 10 Vdc to 14 Vdc No load (max.) 100 mA • Output voltage range: Input current (max.): 4.5 A max. @ lo max. 0.8 Vdc to 3.63 Vdc and Vout = 3.3 V • Ultra high efficiency: 94% @ 12 Vin and 3.3 Vout Input reflected ripple: 100 mA rms • Extremely low internal Remote ON/OFF: (See Note 1) power dissipation • Minimal thermal Start-up time: 20 ms design concerns Output • Designed for reliability: MTBF of 6,920,000 hours per Voltage adjustability: 0.8 - 3.63 Vdc Telcordia SR-332 Setpoint accuracy: ±0.4% typ. • Ideal solution where board space is at a premium or Line regulation: ±0.2% typ. tighter card pitch is required Load regulation: ±1.0% typ. • Industry standard surface-mount footprint Total error band: ±3.0% typ. • Available RoHS compliant Minimum load: 0 A • 2 year warranty Overshoot/Undershoot: None Ripple and noise: 5 Hz to 20 mHz 60 mV pk-pk Safety 25 mV rms •UL/cUL CAN/CSA 22.2 Temperature co-efficient: ±0.01%/˚C No. E186249 •TÜV Product Service Transient response: 100 mV max. deviation (EN60950) Certificate No. 100µs recovery to within ±1.0% B 08 05 51485 378 •CB report and certificate to Remote sense: 10% Vo compensation IEC60950 DE3-51686M1 All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.3.4.09_91 SMT15E_12 Series 2 of 4 652 EMC Characteristics Electrostatic discharge: EN61000-4-2, IEC801-2 Conducted immunity: EN61000-4-6 EN61000-4-3 Radiated immunity: General Specifications Efficiency: 94% Insulation voltage: Non-isolated Switching frequency: Fixed 200 kHz typ. Approvals and standards: EN60950 UL/cUL60950 Material flammability: UL94V-0 Dimensions (L x W x H) 33.02 x 13.46 x 8.21 mm 1.3 x 0.53 x 0.323 inches Weight: 6.3 g (0.22 oz) Coplanarity: 100 µm MTBF: Telcordia SR-332 6,920,000 hours Environmental Specifications Thermal performance: Operating ambient temperature -40° C to +85 °C (See Note 2) Non-operating -40 °C to +125 °C Protection Short circuit: Continuous Thermal: Automatic recovery process yellow 116 1375 1797 375 3405 313 2985 240 242 Embedded Power for Business-Critical Continuity 2607 Rev.3.4.09_91 SMT15E_12 Series Ordering Information 3 of 4 652 All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. Ordering Information Output Currents Regulation Output Efficiency (4, 5) Input Voltage Output Voltage Model odel Numbers Numbers (3) Power (Max.) (typ.) Min Max Line Load 49.5 W 10 - 14 Vdc 0.8 - 3.63 Vdc 0 A 15 A 94% ±0.2% ±1.0% SMT15E-12W3V3J Part Number System with Options S M T 1 5 E - 1 2 W 3 V 3 - T J (4) Packaging Options Product Family No ‘-T’ Suffix = Pb-free RoHS 6/6 compliant SMT = Surface Mount parts in trays e.g SMT15E-12W3V3J -TJ = Pb-free RoHS 6/6 compliant part in Tape and Reel e.g SMT15E-12W3V3-TJ Rated Output Current 15 = 15 Amps Output Voltage Performance 0.8 Vdc to 3.63 Vdc E = Enhanced Performance Type of Output W = Wide Input Voltage 12 = 10 Vdc to 14 Vdc Output Voltage Adjustment of the SMT15E-12W3V3J Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT15E-12W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT15E-12W3V3J converter leaves the factory the output has been adjusted to the default voltage of 0.8 V. Notes 1 The SMT15E features an ‘Positive Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT15E: Configuration Converter Operation Remote pin open circuit Unit is ON Remote pin pulled low [Von/off < 0.8 V] Unit is OFF Remote pin pulled high [Von/off >1.6 V] Unit is ON An ‘Negative Logic’ Remote ON/OFF version is also possible with this converter. To order please place the suffix ‘R’ at the end of the model number, e.g. SMT15E-12W3V3-TRJ. 2 Full derating curves available in both the Longform Datasheet and Application Note. 3 Typical efficiency figures for various output voltages are as follows: 1.2 V 83% 1.5 V 85.5% 1.8 V 87.5% 2.0 V 91% 2.5 V 92% 4 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 5 NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at http://www.PowerConversion.com to find a suitable alternative. process yellow 116 1375 1797 375 3405 313 2985 240 Embedded Power for Business-Critical Continuity 242 2607 Rev.3.4.09_91 SMT15E_12 Series Americas 4 of 4 652 Mechanical Drawing 5810 Van Allen Way Carlsbad, CA 92008 TOP VIEW USA Telephone: +1 760 930 4600 0.039 (1.00) Facsimile: +1 760 930 0698 0.039 (1.00) Europe (UK) Waterfront Business Park BOTTOM VIEW Merry Hill, Dudley 0.190 West Midlands, DY5 1LX 0.310 0.190 (4.83) United Kingdom (7.87) (4.83) 0.190 1.3000.010 (33.02 0.25) 0.297 Telephone: +44 (0) 1384 842 211 (4.83) (7.54) Facsimile: +44 (0) 1384 843 355 5 4 3 2 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street 1 6 Kwun Tong, Kowloon Hong Kong SIDE VIEW 0.048 (1.22) Telephone: +852 2176 3333 0.007 (0.18) Facsimile: +852 2176 3888 Min Clearance For global contact, visit: Seating Plane www.PowerConversion.com Max. component techsupport.embeddedpower @emerson.com Connector (6PL) All dimensions in inches (mm) Width: 0.112 0.003 (2.84 0.08) All tolerance 0.010in (0.25mm) Length: 0.062 0.002 (1.57 0.04) While every precaution has been taken to ensure unless otherwise stated accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. Pin Connections The global leader in enabling business-critical continuity. Pin Number FUNCTION Pin 1 Remote ON/OFF AC Power Pin 2 Remote Sense + Connectivity Pin 3 Trim DC Power Pin 4 +Vout Embedded Computing Pin 5 Ground Embedded Power Pin 6 +Vin Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. 0.323 (8.21) Installed Ht. 0.530 0.010 (13.46 0.25) 0.430 (10.92) 0.405 (10.29) 0.075 (1.91)